How big is the KEF XIO under a TV?

Choose your TV size and how it stands, pick a soundbar, and see both drawn to scale - with a warning if the bar would cover the bottom of the picture.

How to read it

Width. A soundbar looks in proportion when it is about as wide as the screen or a little narrower. Wider than the TV is not wrong, but it overhangs, and on a narrow console it can stick out past the ends. The note under the drawing gives the difference per side.

Height, and the gap under the screen. This is the one people get caught by. A TV standing on feet at its ends usually leaves 1 to 3 inches between the console and the bottom of the screen; a bar taller than that covers the picture, and often the TV's remote-control sensor. A centre stand usually lifts the panel a little more. Measure yours and type it in. If the bar is too tall, the fixes are a TV stand with height settings, wall-mounting the TV, or a lower bar.

Screen sizes are the 16:9 diagonal the TV is sold by. The drawing adds a thin bezel; real bezels vary by a fraction of an inch.

Every soundbar in the list is drawn from the maker's published dimensions. Browse them all on the soundbars page, or compare any two on a soundbar comparison.

Was this calculator useful?
We read every comment, and it is what decides which tool gets built next.

More tools

🔊
Amplifier & Speaker Matcher
Pick your speakers and we work out the power they need, check impedance safety, and rank every amplifier we cover.
💰
System Budget Planner
Split a total across speakers, amplifier and subwoofer, then fill every slot with real models that work together.
📏️
Will It Fit? Speaker Size Finder
Measure your shelf or alcove and see every speaker that goes in it, with a warning where a rear port needs more room than the box does.
🔌
Speaker Wire Gauge Calculator
How thick your speaker cable needs to be for the run length and impedance, and what you lose if it is too thin.
Speaker Impedance Calculator
Wire two or more speakers in series or parallel and see the load your amplifier actually sees.
📏
Speaker Placement Calculator
A plan view of your room: speaker spacing, wall distances, where the bass cancels and where the first reflection lands.
🎸
Subwoofer Crossover Calculator
Where to set the crossover between your speakers and a subwoofer, and which reason is driving the answer.
🎧
Speaker Test Tones
Channel check, polarity, bass extension and frequency sweeps, generated in your browser. Nothing to download.
🏠
Room Mode Calculator
The frequencies your room reinforces and cancels, where they pile up, and what to move first.
📣
SPL & Amplifier Power Calculator
How loud a speaker plays for a given power at a given distance - or how many watts you need for a target level.