Power needed
19–25 W
per channel, into 4 ohms
To hit 95 dB peaks at 3 m from a pair of Wilson Audio Mezzo CSC, you need at least 19 W a channel. More than 25 W is wasted here - that is all Wilson Audio rates the speaker to take.
Show the working
- 95 dB target at the seat
- +4.8 dB for 3.0 m of distance
- -3 dB for a stereo pair
- -84.0 dB effective sensitivity
- 3.0 dB taken off to convert the 4 ohm 2.83V rating to dB per watt
- 2 dB allowed for optimistic published sensitivity
- Published sensitivity 89 dB, used as 84.0 dB per watt.
FiiO EA13 with the Wilson Audio Mezzo CSC
Workable with care
Just barely enough (2 dB of headroom). Fine at normal volume, no reserve for peaks.
Has a 4 ohm tap, which is exactly what this 4 ohm speaker wants. Taps: 4 / 8 ohm.
A valve amplifier makes the same power on each tap, so sensitivity decides it. At 84.0 dB this speaker needs most of the 28 W available - it will work, with little in reserve.
A power amplifier: you will need a preamplifier, or a streamer with a volume control, as well.
Full FiiO EA13 specs
·
Clear this amp
192 integrated amplifiers suit the Wilson Audio Mezzo CSC
Also show the 58 we do not recommend
1
Workable with care
6 dB of headroom over what this speaker needs - peaks stay clean. Well above the 25 W the maker rates the speaker for, so keep an eye on the volume knob.
Has a 4 ohm tap, which is exactly what this 4 ohm speaker wants. Taps: 4 / 8 ohm.
A valve amplifier makes the same power on each tap, so what matters is sensitivity - and at 84.0 dB this speaker is efficient enough that 70 W is comfortable.
Sensible value pick against these speakers.
2
Workable with care
3 dB of headroom over what this speaker needs - peaks stay clean. Well above the 25 W the maker rates the speaker for, so keep an eye on the volume knob.
Has a 4 ohm tap, which is exactly what this 4 ohm speaker wants. Taps: 4 / 8 ohm.
A valve amplifier makes the same power on each tap, so what matters is sensitivity - and at 84.0 dB this speaker is efficient enough that 42 W is comfortable.
Well below the speakers - leaves money on the table, but nothing wrong with it.
3
Workable with care
3 dB of headroom over what this speaker needs - peaks stay clean. Well above the 25 W the maker rates the speaker for, so keep an eye on the volume knob.
Has a 4 ohm tap, which is exactly what this 4 ohm speaker wants. Taps: 4 / 8 ohm.
A valve amplifier makes the same power on each tap, so what matters is sensitivity - and at 84.0 dB this speaker is efficient enough that 40 W is comfortable.
Well below the speakers - leaves money on the table, but nothing wrong with it.
4
Workable with care
4 dB of headroom over what this speaker needs - peaks stay clean. Well above the 25 W the maker rates the speaker for, so keep an eye on the volume knob.
Has a 4 ohm tap, which is exactly what this 4 ohm speaker wants. Taps: 4 / 8 ohm.
A valve amplifier makes the same power on each tap, so what matters is sensitivity - and at 84.0 dB this speaker is efficient enough that 44 W is comfortable.
Well below the speakers - leaves money on the table, but nothing wrong with it.
5
Workable with care
6 dB of headroom over what this speaker needs - peaks stay clean. Well above the 25 W the maker rates the speaker for, so keep an eye on the volume knob.
Has a 4 ohm tap, which is exactly what this 4 ohm speaker wants. Taps: 4 / 8 ohm.
A valve amplifier makes the same power on each tap, so what matters is sensitivity - and at 84.0 dB this speaker is efficient enough that 70 W is comfortable.
Sensible value pick against these speakers.
6
Workable with care
12 dB of headroom, far more than needed. No harm in it. Well above the 25 W the maker rates the speaker for, so keep an eye on the volume knob.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
Power nearly doubles into 4 ohms (150 W to 300 W) - a stiff supply that copes with hard loads.
Balanced against the price of the speakers.
7
Workable with care
6 dB of headroom over what this speaker needs - peaks stay clean. Well above the 25 W the maker rates the speaker for, so keep an eye on the volume knob.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
Power nearly doubles into 4 ohms (40 W to 80 W) - a stiff supply that copes with hard loads.
Well below the speakers - leaves money on the table, but nothing wrong with it.
8
Good match
3 dB of headroom over what this speaker needs - peaks stay clean.
Has a 4 ohm tap, which is exactly what this 4 ohm speaker wants. Taps: 4 / 8 ohm.
A valve amplifier makes the same power on each tap, so sensitivity decides it. At 84.0 dB this speaker needs most of the 35 W available - it will work, with little in reserve.
Well below the speakers - leaves money on the table, but nothing wrong with it.
9
Workable with care
11 dB of headroom over what this speaker needs - peaks stay clean. Well above the 25 W the maker rates the speaker for, so keep an eye on the volume knob.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
Power nearly doubles into 4 ohms (125 W to 250 W) - a stiff supply that copes with hard loads.
Sensible value pick against these speakers.
10
Workable with care
7 dB of headroom over what this speaker needs - peaks stay clean. Well above the 25 W the maker rates the speaker for, so keep an eye on the volume knob.
Has a 4 ohm tap, which is exactly what this 4 ohm speaker wants. Taps: 4 / 8 ohm.
A valve amplifier makes the same power on each tap, so what matters is sensitivity - and at 84.0 dB this speaker is efficient enough that 100 W is comfortable.
Well below the speakers - leaves money on the table, but nothing wrong with it.
11
Workable with care
11 dB of headroom over what this speaker needs - peaks stay clean. Well above the 25 W the maker rates the speaker for, so keep an eye on the volume knob.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
Power nearly doubles into 4 ohms (125 W to 250 W) - a stiff supply that copes with hard loads.
Sensible value pick against these speakers.
12
Workable with care
5 dB of headroom over what this speaker needs - peaks stay clean. Well above the 25 W the maker rates the speaker for, so keep an eye on the volume knob.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
No 4 ohm power rating on file. On a 4 ohm speaker dipping to 2.66 that is the figure that matters, so this one is unproven on the load.
Well below the speakers - leaves money on the table, but nothing wrong with it.
13
Workable with care
4 dB of headroom over what this speaker needs - peaks stay clean. Well above the 25 W the maker rates the speaker for, so keep an eye on the volume knob.
Rated to 4 ohms, but this speaker dips to 2.66. Fine at sane volume, tight if you push it hard.
Power nearly doubles into 4 ohms (25 W to 50 W) - a stiff supply that copes with hard loads.
Well below the speakers - leaves money on the table, but nothing wrong with it.
14
Workable with care
6 dB of headroom over what this speaker needs - peaks stay clean. Well above the 25 W the maker rates the speaker for, so keep an eye on the volume knob.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
No 4 ohm power rating on file. On a 4 ohm speaker dipping to 2.66 that is the figure that matters, so this one is unproven on the load.
Well below the speakers - leaves money on the table, but nothing wrong with it.
15
Workable with care
9 dB of headroom over what this speaker needs - peaks stay clean. Well above the 25 W the maker rates the speaker for, so keep an eye on the volume knob.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
No 4 ohm power rating on file. On a 4 ohm speaker dipping to 2.66 that is the figure that matters, so this one is unproven on the load.
Sensible value pick against these speakers.
16
Workable with care
7 dB of headroom over what this speaker needs - peaks stay clean. Well above the 25 W the maker rates the speaker for, so keep an eye on the volume knob.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
No 4 ohm power rating on file. On a 4 ohm speaker dipping to 2.66 that is the figure that matters, so this one is unproven on the load.
Sensible value pick against these speakers.
17
Workable with care
5 dB of headroom over what this speaker needs - peaks stay clean. Well above the 25 W the maker rates the speaker for, so keep an eye on the volume knob.
Rated to 4 ohms, but this speaker dips to 2.66. Fine at sane volume, tight if you push it hard.
Power nearly doubles into 4 ohms (30 W to 60 W) - a stiff supply that copes with hard loads.
Well below the speakers - leaves money on the table, but nothing wrong with it.
18
Workable with care
12 dB of headroom, far more than needed. No harm in it. Well above the 25 W the maker rates the speaker for, so keep an eye on the volume knob.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
No 4 ohm power rating on file. On a 4 ohm speaker dipping to 2.66 that is the figure that matters, so this one is unproven on the load.
Sensible value pick against these speakers.
19
Workable with care
4 dB of headroom over what this speaker needs - peaks stay clean. Well above the 25 W the maker rates the speaker for, so keep an eye on the volume knob.
Rated to 4 ohms, but this speaker dips to 2.66. Fine at sane volume, tight if you push it hard.
Power rises usefully into 4 ohms (30 W to 50 W).
Well below the speakers - leaves money on the table, but nothing wrong with it.
20
Workable with care
10 dB of headroom over what this speaker needs - peaks stay clean. Well above the 25 W the maker rates the speaker for, so keep an eye on the volume knob.
Rated down to 3 ohms, comfortable with a 4 ohm speaker that dips to 2.66.
Power nearly doubles into 4 ohms (100 W to 200 W) - a stiff supply that copes with hard loads.
Well below the speakers - leaves money on the table, but nothing wrong with it.
Showing the best 20 of 192. Narrow it with the price range below, or a different budget split.
47 power amplifiers that would also drive them
Listed separately because they are not a complete system: a power amplifier has no volume control and no inputs to speak of, so you need a preamplifier or a streaming preamp as well. Worth it if you already own one, or if you want to buy the two halves separately.
1
Workable with care
4 dB of headroom over what this speaker needs - peaks stay clean. Well above the 25 W the maker rates the speaker for, so keep an eye on the volume knob.
Has a 4 ohm tap, which is exactly what this 4 ohm speaker wants. Taps: 4 / 8 / 16 ohm.
A valve amplifier makes the same power on each tap, so what matters is sensitivity - and at 84.0 dB this speaker is efficient enough that 44 W is comfortable.
Well below the speakers - leaves money on the table, but nothing wrong with it.
2
Workable with care
3 dB of headroom over what this speaker needs - peaks stay clean. Well above the 25 W the maker rates the speaker for, so keep an eye on the volume knob.
Has a 4 ohm tap, which is exactly what this 4 ohm speaker wants. Taps: 4 / 8 / 16 ohm.
A valve amplifier makes the same power on each tap, so what matters is sensitivity - and at 84.0 dB this speaker is efficient enough that 40 W is comfortable.
Well below the speakers - leaves money on the table, but nothing wrong with it.
3
Workable with care
4 dB of headroom over what this speaker needs - peaks stay clean. Well above the 25 W the maker rates the speaker for, so keep an eye on the volume knob.
Has a 4 ohm tap, which is exactly what this 4 ohm speaker wants. Taps: 4 / 8 / 16 ohm.
A valve amplifier makes the same power on each tap, so what matters is sensitivity - and at 84.0 dB this speaker is efficient enough that 44 W is comfortable.
Well below the speakers - leaves money on the table, but nothing wrong with it.
4
Workable with care
6 dB of headroom over what this speaker needs - peaks stay clean. Well above the 25 W the maker rates the speaker for, so keep an eye on the volume knob.
Has a 4 ohm tap, which is exactly what this 4 ohm speaker wants. Taps: 4 / 8 / 16 ohm.
A valve amplifier makes the same power on each tap, so what matters is sensitivity - and at 84.0 dB this speaker is efficient enough that 70 W is comfortable.
Sensible value pick against these speakers.
5
Workable with care
7 dB of headroom over what this speaker needs - peaks stay clean. Well above the 25 W the maker rates the speaker for, so keep an eye on the volume knob.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
No 4 ohm power rating on file. On a 4 ohm speaker dipping to 2.66 that is the figure that matters, so this one is unproven on the load.
Sensible value pick against these speakers.
6
Workable with care
12 dB of headroom, far more than needed. No harm in it. Well above the 25 W the maker rates the speaker for, so keep an eye on the volume knob.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
Power nearly doubles into 4 ohms (150 W to 300 W) - a stiff supply that copes with hard loads.
Sensible value pick against these speakers.
7
Workable with care
Just barely enough (2 dB of headroom). Fine at normal volume, no reserve for peaks.
Has a 4 ohm tap, which is exactly what this 4 ohm speaker wants. Taps: 4 / 8 ohm.
A valve amplifier makes the same power on each tap, so sensitivity decides it. At 84.0 dB this speaker needs most of the 28 W available - it will work, with little in reserve.
Well below the speakers - leaves money on the table, but nothing wrong with it.
8
Workable with care
7 dB of headroom over what this speaker needs - peaks stay clean. Well above the 25 W the maker rates the speaker for, so keep an eye on the volume knob.
Has a 4 ohm tap, which is exactly what this 4 ohm speaker wants. Taps: 4 / 8 ohm.
A valve amplifier makes the same power on each tap, so what matters is sensitivity - and at 84.0 dB this speaker is efficient enough that 100 W is comfortable.
Well below the speakers - leaves money on the table, but nothing wrong with it.
Were these amplifier recommendations useful?
It helps us tune the matching, and we read every comment.
Thanks. Anything you would add?
Optional, and it goes straight to the person who maintains this page.
Thanks - noted.
Sensitivity and impedance figures are the manufacturer's own. We read sensitivity as dB at 2.83 V/1 m and take 2 dB off it, because published figures run high. Treat the result as a well-founded starting point, not a measurement. Full Wilson Audio Mezzo CSC specs.
More tools
💰
System Budget Planner
Split a total across speakers, amplifier and subwoofer, then fill every slot with real models that work together.
📏️Will It Fit? Speaker Size Finder
Measure your shelf or alcove and see every speaker that goes in it, with a warning where a rear port needs more room than the box does.
🔌Speaker Wire Gauge Calculator
How thick your speaker cable needs to be for the run length and impedance, and what you lose if it is too thin.
⚡Speaker Impedance Calculator
Wire two or more speakers in series or parallel and see the load your amplifier actually sees.
📏Speaker Placement Calculator
A plan view of your room: speaker spacing, wall distances, where the bass cancels and where the first reflection lands.
🎸Subwoofer Crossover Calculator
Where to set the crossover between your speakers and a subwoofer, and which reason is driving the answer.
🎧Speaker Test Tones
Channel check, polarity, bass extension and frequency sweeps, generated in your browser. Nothing to download.
🏠Room Mode Calculator
The frequencies your room reinforces and cancels, where they pile up, and what to move first.
📣SPL & Amplifier Power Calculator
How loud a speaker plays for a given power at a given distance - or how many watts you need for a target level.