In this review, we will be comparing TuneTot and 607 S2 AE, two Passive Bookshelf speakers from Wilson Audio and Bowers Wilkins.
Let's have a brief look at the main features
of Wilson Audio TuneTot and B&W 607 S2 first before getting into our more
detailed comparison.
| Key Specs | Wilson Audio TuneTot | B&W 607 S2 |
|---|
| Brand | Wilson Audio
United States · founded 1974 | Bowers Wilkins
United Kingdom · founded 1966 |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | 1" Dome | 1" Decoupled Double Dome |
|---|
| Woofer | 5.75" Paper pulp | 5" Continuum |
|---|
| Frequency response | 65-23k Hz | 52-28k Hz |
|---|
| Sensitivity | 86 dB | 84 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | from 25 watts | 30-100 watts |
|---|
| Weight | 13.15kg / 28.9lbs | 4.70kg / 10.3lbs |
|---|
| Dimensions (H x W x D) | 14-13/16" x 8-5/8" x 10-3/16"
377.0 x 219.0 x 259.0mm | 11-13/16" x 6-1/2" x 9-1/8"
301.0 x 166.0 x 232.0mm |
|---|
What size room are the Wilson Audio TuneTot and B&W 607 S2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Wilson Audio TuneTot |
B&W 607 S2 |
| Near-field |
Good |
Average |
| Small Room |
Good |
Good |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Poor |
| Very Large Room |
No way |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both TuneTot and 607 S2 AE are 2-way speakers.
Wilson Audio TuneTotB&W 607 S2
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Wilson Audio TuneTot |
B&W 607 S2 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.75-inch
|
1 x 5-inch
|
TuneTot features a 1" Doped silk fabric Dome Tweeter and 1 x 5.75" Paper pulp Woofer. On the other hand, the 607 S2 AE features a 1" Aluminum Decoupled Double Dome Tweeter and 1 x 5" Continuum Woofer.
Frequency Response
TuneTot has a frequency range of 65-23k Hz whereas 607 S2 AE has a frequency range of 52-28k Hz. With a minimum frequency of 52Hz, the 607 S2 AE can go significantly deeper on the low side and provide stronger bass compared to the TuneTot's min frequency of 65Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
TuneTot and 607 S2 AE have the same Impedance of 8 ohms but where they differ is the sensitivity levels. TuneTot sensitivity is rated at 86 dB and the 607 S2 AE's is at 84 dB. This 2 dB difference makes the Wilson Audio TuneTot a more sensitive speaker compared to B&W 607 S2, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
607 S2 AE can handle a max power of 100 watts RMS, whereas TuneTot has a max power handling value of watts RMS, 100 watts less than the 607 S2 AE.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
607 S2 AE features Binding post posts which make bi-amping or bi-wiring possible. TuneTot has a Binding post which doesn't feature bi-amping/bi-wiring.
B&W 607 S2's Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both TuneTot and 607 S2 AE have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wilson Audio TuneTot's and B&W 607 S2's external dimensions. Wilson Audio TuneTot has external dimensions of 377.0 x 219.0 x 259.0mm (14-13/16 x 8-5/8 x 10-3/16inch) whereas B&W 607 S2 has external dimensions of 301.0 x 166.0 x 232.0mm (11-13/16 x 6-1/2 x 9-1/8inch).
Wilson Audio TuneTot is clearly the larger of the two speakers. Its body is 53mm wider, 76mm taller and 27mm deeper than B&W 607 S2.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Wilson Audio TuneTot needs about 47% more floor or shelf area. Wilson Audio TuneTot is 27mm deeper, so it stands that much further out from the wall. Wilson Audio TuneTot is 76mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wilson Audio TuneTot is approximately 567.2cm2 / 87.9inch2 and base area of the B&W 607 S2 is approximately 385.1cm2 / 59.7inch2. The TuneTot requires 47% more surface area than the 607 S2 AE which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Wilson Audio TuneTot weighs 13.15kg / 28.9lbs and the B&W 607 S2 weighs 4.70kg / 10.3lbs. This makes the TuneTot 180% heavier than the 607 S2 AE.
Here is a comparison of how TuneTot and 607 S2 AE's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of B&W 607 S2?
Here are the items that come with the 607 S2 AE:
- 2 Bookshelf loudspeakers
- 2 Grilles
- 2 Two-piece foam port plugs
- 8 Self-adhesive rubber feet
- 4 Jumper-straps (pre-installed)
- Manual
- Bowers & Wilkins brochure
- Warranty Information
 Sensitivity |
86 dB
vs
84 dB
|
Play louder with same amount of amplification power |
 Minimum Impedance |
6.61 ohms
vs
3.0 ohms
|
Very low impedance levels puts more pressure on amplifier |
 Woofer Size |
5.75 inches
vs
5 inches
|
Larger woofer |
|
Low Frequency Response |
52 Hz
vs
65 Hz
|
Generates deeper bass |
 High Frequency Response |
28k Hz
vs
23k Hz
|
Generates higher frequency |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Height |
301mm
vs
377mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
385cm2
vs
567cm2
|
Takes less floor space |
 Price per pair* |
799USD
vs
13545USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Wilson Audio TuneTot |
Bowers & Wilkins 607 S2 Anniversary Edition |
| Brand |
Wilson Audio |
Bowers Wilkins |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
from 25 watts |
30-100 watts |
| Sensitivity |
86 dB |
84 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
6.61 ohms |
3.0 ohms |
| Frequency Response |
65-23k Hz |
52-28k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5.75" |
5" |
| Woofer Composition |
Paper pulp |
Continuum |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Dome |
Decoupled Double Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
377.0mm (14.8") |
301.0mm (11.9") |
| Width |
219.0mm (8.6") |
166.0mm (6.5") |
| Depth |
259.0mm (10.2") |
232.0mm (9.1") |
| Weight |
13.15kg (28.9lbs) |
4.70kg (10.3lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF/Vinyl |
| Available Colors |
n/a |
Matte Black, Matte White, Oak, Red Cherry |
| Mounting Bracket |
|
No |
| Recommended Stand Height |
n/a |
24-26" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |
These sit in different price classes - Wilson Audio TuneTot costs roughly 17x what B&W 607 S2 does. Expect it to lead on paper; the question is whether the gap is audible enough in your room to be worth it.
| Area | Better | Why |
|---|
| Bass | B | B&W 607 S2 digs deeper - 52Hz against 65Hz. |
| Amplifier needs | A | Wilson Audio TuneTot is more sensitive (86dB vs 84dB), so it goes louder on the same amplifier. |
| Size | depends | B&W 607 S2 is easier to place; Wilson Audio TuneTot is bigger, which usually goes with fuller bass. Your room decides. |
| Expandability | B | B&W 607 S2: bi-amping. B&W 607 S2 sits in a wider range (5 models), so a matched surround system is easier later. |
| Price | B | B&W 607 S2 is cheaper - $799 against $13,545, about 94% less; arguably a different class. |
A Wilson Audio TuneTot B B&W 607 S2
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
B&W 607 S2 has the edge on paper, though the margin is not large. The rows marked "depends" may matter more to you than the score does. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 65Hz anyway, so judge these on the other rows instead. Match it to your room: we rate Wilson Audio TuneTot the better fit for near-field listening; elsewhere the two are rated the same.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.