In this review, we will be comparing Elysian 4 and R11, two Passive Floor-standing speakers from Wharfedale and KEF.
Let's have a brief look at the main features
of Wharfedale Elysian 4 and KEF R11 first before getting into our more
detailed comparison.
Wharfedale Elysian 4 Key Specs
- 3-way Design
- 27x90mm" AMT (Ribbon) Tweeter
- 6" Midrange
- 2 x 8.5" Coated Fiberglass Woofer
- 30-22k Hz Frequency Response
- 92 dB Sensitivity
- Impedance: 4ohms
- Power Range:15-250watts
- Weight:49.60kg
- Dimensions (H x W x D): 1188.0" x 15-13/16" x 18-3/16"( 1188.0 x 402.0 x 462.0mm )
KEF R11 Key Specs
- 3-way Design
- 1" Dome Tweeter
- 5" Midrange
- 4 x 6.5" Hybrid Aluminum Woofer
- 5" Midrange
- 46-28k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 8ohms
- Power Range:15-300watts
- Weight:37.70kg
- Dimensions (H x W x D): 1301.0" x 12-1/4" x 15-5/16"( 1301.0 x 312.0 x 389.0mm )
What size room are the Wharfedale Elysian 4 and KEF R11 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Wharfedale Elysian 4 |
KEF R11 |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Wharfedale Elysian 4 and KEF R11 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Elysian 4 and R11 are 3-way speakers.
| Driver |
Wharfedale Elysian 4 |
KEF R11 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
27x90mm-inch
|
1-inch
|
|
Midrange
|
1 x 6-inch |
1 x 5-inch |
|
Woofer
|
2 x 8.5-inch
|
4 x 6.5-inch
|
Elysian 4 features a 27x90mm" AMT (Ribbon) Tweeter , a 6" Midrange and 2 x 8.5" Coated Fiberglass Woofer with a Crossover frequency at 340Hz and 3100Hz. On the other hand, the R11 features a 1" aluminum Dome Tweeter , a 5" Midrange and 4 x 6.5" Hybrid Aluminum Woofer with a Crossover frequency at 400Hz and 2900Hz.
Frequency Response
Elysian 4 has a frequency range of 30-22k Hz whereas R11 has a frequency range of 46-28k Hz. With a minimum frequency of 30Hz, the Elysian 4 can go significantly deeper on the low side and provide stronger bass compared to the R11's min frequency of 46Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Elysian 4 is a 4 ohms speaker compared to the R11 which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Elysian 4 can provide this impedance level.
These two speakers also have different sensitivity levels. Elysian 4 sensitivity is rated at 92 dB and the R11's is rated at 90 dB. This 2 dB difference makes the Wharfedale Elysian 4 a more sensitive speaker compared to KEF R11, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Elysian 4 can handle a max power of 300 watts RMS from the amp the whereas Elysian 4 has a max power handling value of 250 watts RMS , 50 watts less than the R11.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Elysian 4 and R11 features dual binding post speaker terminals for bi-amping or bi-wiring.
KEF R11's Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Elysian 4 has a bottom firing port whereas R11 has a rear firing ports. Wharfedale Elysian 4's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to KEF R11 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale Elysian 4's and KEF R11's external dimensions. Wharfedale Elysian 4 has external dimensions of 1188.0 x 402.0 x 462.0mm ( 46-3/4 x 15-13/16 x 18-3/16inch) whereas KEF R11 has external dimensions of 1301.0 x 312.0 x 389.0mm ( 51-3/16 x 12-1/4 x 15-5/16inch) .
KEF R11 is 90mm narrower and 73mm less deeper than Wharfedale Elysian 4 but it is also 113mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale Elysian 4 is approximately 1857.2cm2 / 287.9inch2 and base area of the KEF R11 is approximately 1213.7cm2 / 188.1inch2. The Elysian 4 requires 53% more surface area than the R11 which gives it a small disadvantage on placement in tight spaces.