In this review, we will be comparing Elysian 2 and LINTON Heritage, two Passive Bookshelf speakers by Wharfedale Let's have a brief look at the main features
of Wharfedale Elysian 2 and Wharfedale LINTON first before getting into our more
detailed comparison.
What size room are the Wharfedale Elysian 2 and Wharfedale LINTON speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Wharfedale Elysian 2 and Wharfedale LINTON compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Elysian 2 and LINTON Heritage are 3-way speakers.
| Driver |
Wharfedale Elysian 2 |
Wharfedale LINTON |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
27x90mm-inch
|
1-inch
|
|
Midrange
|
1 x 6-inch |
1 x 5-inch |
|
Woofer
|
1 x 8.5-inch
|
1 x 8-inch
|
Elysian 2 features a 27x90mm" AMT (Ribbon) Tweeter , a 6" Midrange and 1 x 8.5" Coated Fiberglass Woofer with a Crossover frequency at 360Hz and 2900Hz. On the other hand, the LINTON Heritage features a 1" woven textile Soft-dome Tweeter , a 5" Midrange and 1 x 8" Woven Kevlar Woofer with a Crossover frequency at 630Hz and 2400Hz.
Frequency Response
Elysian 2 has a frequency range of 35-22k Hz whereas LINTON Heritage has a frequency range of 40-20k Hz. With a minimum frequency of 35Hz, the Elysian 2 can go significantly deeper on the low side and provide stronger bass compared to the LINTON Heritage's min frequency of 40Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Elysian 2 is a 4 ohms speaker compared to the LINTON Heritage which has a nominal impedance of 6 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Elysian 2 can provide this impedance level.
These two speakers also have different sensitivity levels. Elysian 2 sensitivity is rated at 89 dB and the LINTON Heritage's is rated at 90 dB. This 1 dB difference makes the Wharfedale LINTON a more sensitive speaker compared to Wharfedale Elysian 2, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Elysian 2 can handle a max power of 250 watts RMS from the amp the whereas LINTON Heritage has a max power handling value of 200 watts RMS, 50 watts less than the Elysian 2.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Elysian 2 features Post posts which make bi-amping or bi-wiring possible. LINTON Heritage has a Post which doesn't feature bi-amping/bi-wiring.
Wharfedale Elysian 2's Post terminals allows Bi-amping or bi-wiring
Wharfedale LINTON's Post terminals
Cabinet Type and Port Position
Elysian 2 has a bottom firing port whereas LINTON Heritage has a rear firing ports. Wharfedale Elysian 2's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Wharfedale LINTON with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale Elysian 2's and Wharfedale LINTON's external dimensions. Wharfedale Elysian 2 has external dimensions of 700.0 x 334.0 x 462.0mm ( 27.5 x 13.1 x 18.1inch) whereas Wharfedale LINTON has external dimensions of 565.0 x 300.0 x 360.0mm ( 22.2 x 11.8 x 12.9inch) .
Wharfedale Elysian 2 is clearly the larger of the two speakers. Its body is 34mm wider, 135mm taller and 102mm deeper than Wharfedale LINTON.
Below you can see the front view size comparison of Wharfedale Elysian 2 and Wharfedale LINTON in scale.
Comparison image of Wharfedale Elysian 2 and Wharfedale LINTON Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale Elysian 2 is approximately 1543.1cm2 / 239.2inch2 and base area of the Wharfedale LINTON is approximately 990.0cm2 / 153.5inch2. The Elysian 2 requires 56% more surface area than the LINTON Heritage which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Wharfedale Elysian 2 weighs 30.50kg / 67.1lbs and the Wharfedale LINTON weighs 18.40kg / 40.5lbs. This makes the Elysian 2 66% heavier than the LINTON Heritage.
Here is a comparison of how Elysian 2 and LINTON Heritage's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Wharfedale Elysian 2?
Here are the items that are included inside the box of Elysian 2:
Stand-mount loudspeaker Grille 2 Terminal-jumpers (pre-installed) User Manual
What's in the Box of Wharfedale LINTON?
Here are the items that come with the LINTON Heritage:
Bookshelf loudspeaker Grille (pre-installed) 4 Self-adhesive rubber feet Pair of white gloves User's Manual
 Max Input Power |
250 watts
vs
200 watts
|
Handle more power from your amplifier |
 Woofer Size |
8.5 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
35 Hz
vs
40 Hz
|
Generates deeper bass |
 High Frequency Response |
22k Hz
vs
20k Hz
|
Generates higher frequency |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Sensitivity |
90 dB
vs
89 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
6 ohms
vs
4 ohms
|
Less selective with amplifiers |
 Height |
565mm
vs
700mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
990cm2 (300x360mm)
vs
1543cm2 (334x462mm)
|
Takes less floor space |
 Price per pair* |
1500USD
vs
6996USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Wharfedale Elysian 2 |
Wharfedale LINTON Heritage |
| Brand |
Wharfedale |
Wharfedale |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
25-250 watts |
25-200 watts |
| Sensitivity |
89 dB |
90 dB |
| Impedance |
4 ohms |
6 ohms |
| Impedance |
n/a |
3.5 ohms |
| Frequency Response |
35-22k Hz |
40-20k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
8.5" |
8" |
| Woofer Composition |
Coated Fiberglass |
Woven Kevlar |
| Woofer Surround Material |
Foamed Rubber |
Rubber |
| Tweeter Size |
27x90mm" |
1" |
| Tweeter Type |
AMT (Ribbon) |
Soft-dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
6" |
5" |
| Crossover Frequency |
360Hz and 2900Hz |
630Hz and 2400Hz |
| Firing Direction |
bottom |
rear |
Physical Specs |
|
|
| Height |
700.0mm (27.6") |
565.0mm (22.2") |
| Width |
334.0mm (13.1") |
300.0mm (11.8") |
| Depth |
462.0mm (18.2") |
360.0mm (14.2") |
| Weight |
30.50kg (67.1lbs) |
18.40kg (40.5lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-veneer |
MDF/Wood Veneer |
| Available Colors |
Piano Black, Piano Walnut,White |
Walnut, Red Mahogany, Black |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
16-22" |
18-22" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
No |
Other |
|
|
| Parts Warranty |
5 years |
5 Years |
| Labor Warranty |
5 years |
5 Years |