In this review, we will be comparing EVO4.1 and Denton 85, two Passive Bookshelf speakers by Wharfedale Let's have a brief look at the main features
of Wharfedale EVO4.1 and Wharfedale Denton 85 first before getting into our more
detailed comparison.
What size room are the Wharfedale EVO4.1 and Wharfedale Denton 85 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Wharfedale EVO4.1 and Wharfedale Denton 85 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both EVO4.1 and Denton 85 are 2-way speakers.
| Driver |
Wharfedale EVO4.1 |
Wharfedale Denton 85 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.18x2.36-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5-inch
|
1 x 6.5-inch
|
EVO4.1 features a 1.18x2.36" AMT (Ribbon) Tweeter and 1 x 5" Kevlar Woofer . On the other hand, the Denton 85 features a 1" woven textile Soft-Dome Tweeter and 1 x 6.5" Woven Kevlar Woofer with a Crossover frequency at 3100Hz.
Frequency Response
EVO4.1 has a frequency range of 64-22k Hz whereas Denton 85 has a frequency range of 45-20k Hz. With a minimum frequency of 45Hz, the Denton 85 can go significantly deeper on the low side and provide stronger bass compared to the EVO4.1's min frequency of 64Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
EVO4.1 is a 8 ohms speaker compared to the Denton 85 which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Denton 85 can provide this impedance level.
These two speakers also have different sensitivity levels. EVO4.1 sensitivity is rated at 87 dB and the Denton 85's is rated at 88 dB. This 1 dB difference makes the Wharfedale Denton 85 a more sensitive speaker compared to Wharfedale EVO4.1, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
EVO4.1 can handle a max power of 120 watts RMS from the amp the whereas EVO4.1 has a max power handling value of 100 watts RMS , 20 watts less than the Denton 85.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both EVO4.1 and Denton 85 features dual binding post speaker terminals for bi-amping or bi-wiring.
Wharfedale EVO4.1's Post terminals allows Bi-amping or bi-wiring
Wharfedale Denton 85's Post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
EVO4.1 has a bottom firing port whereas Denton 85 has a rear firing ports. Wharfedale EVO4.1's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Wharfedale Denton 85 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale EVO4.1's and Wharfedale Denton 85's external dimensions. Wharfedale EVO4.1 has external dimensions of 335.0 x 210.0 x 295.0mm ( 13.1 x 8.2 x 11.6inch) whereas Wharfedale Denton 85 has external dimensions of 342.0 x 240.0 x 304.0mm ( 13-7/16 x 9-7/16 x 11-15/16inch) .
Wharfedale Denton 85 is clearly the larger of the two speakers. Its body is 30mm wider, 7mm taller and 9mm deeper than Wharfedale EVO4.1.
Below you can see the front view size comparison of Wharfedale EVO4.1 and Wharfedale Denton 85 in scale.
Comparison image of Wharfedale EVO4.1 and Wharfedale Denton 85 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale EVO4.1 is approximately 619.5cm2 / 96.0inch2 and base area of the Wharfedale Denton 85 is approximately 729.6cm2 / 113.1inch2. The EVO4.1 requires 15% less surface area than the Denton 85 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Wharfedale EVO4.1 weighs 7.80kg / 17.2lbs and the Wharfedale Denton 85 weighs 9.00kg / 19.8lbs. This makes the Denton 85 15% heavier than the EVO4.1.
Here is a comparison of how EVO4.1 and Denton 85's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Wharfedale EVO4.1?
Here are the items that are included inside the box of EVO4.1:
2 Bookshelf loudspeakers 2 Grilles 4 Jumper-bars (pre-installed) 8 Self-adhesive rubber feet Pair of white cloth gloves User Manual
What's in the Box of Wharfedale Denton 85?
Here are the items that come with the Denton 85:
2 Bookshelf loudspeakers 2 Grilles 4 Jumper-bars (pre-installed) 8 Self-adhesive rubber feet Pair of white cloth gloves User Manual
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
 High Frequency Response |
22k Hz
vs
20k Hz
|
Generates higher frequency |
 Height |
335mm
vs
342mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
619cm2 (210x295mm)
vs
729cm2 (240x304mm)
|
Takes less floor space |
 Price per pair* |
799USD
vs
999USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
120 watts
vs
100 watts
|
Handle more power from your amplifier |
 Sensitivity |
88 dB
vs
87 dB
|
Play louder with same amount of amplification power |
 Minimum Impedance |
3.8 ohms
vs
3.5 ohms
|
Very low impedance levels puts more pressure on amplifier |
 Woofer Size |
6.5 inches
vs
5 inches
|
Larger woofer |
| Low Frequency Response |
45 Hz
vs
64 Hz
|
Generates deeper bass |
| General |
Wharfedale EVO4.1 |
Wharfedale Denton 85 |
| Brand |
Wharfedale |
Wharfedale |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
25-100 watts |
20-120 watts |
| Sensitivity |
87 dB |
88 dB |
| Impedance |
8 ohms |
4 ohms |
| Impedance |
3.5 ohms |
3.8 ohms |
| Frequency Response |
64-22k Hz |
45-20k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5" |
6.5" |
| Woofer Composition |
Kevlar |
Woven Kevlar |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1.18x2.36" |
1" |
| Tweeter Type |
AMT (Ribbon) |
Soft-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
3100Hz |
| Firing Direction |
bottom |
rear |
Physical Specs |
|
|
| Height |
335.0mm (13.2") |
342.0mm (13.5") |
| Width |
210.0mm (8.3") |
240.0mm (9.4") |
| Depth |
295.0mm (11.6") |
304.0mm (12") |
| Weight |
7.80kg (17.2lbs) |
9.00kg (19.8lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-veneer |
MDF/Wood Veneer |
| Available Colors |
Walnut,Black,White |
Walnut, Mahogany, Black |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
24-26" |
24-28" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |