In this review, we will be comparing Diamond 220 and RTi A1, two Passive Bookshelf speakers from Wharfedale and Polk Audio. Let's have a brief look at the main features
of Wharfedale 220 and Polk RTi A1 first before getting into our more
detailed comparison.
Wharfedale 220 Key Specs
- 2-way Design
- 1" Dome Tweeter
- 5" Woven Kevlar Woofer
- 56-20k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 8ohms
- Power Range:25-100watts
- Weight:5.32kg
- Dimensions (H x W x D): 315.0" x 6.8" x 10.0"( 315.0 x 174.0 x 255.0mm )
Polk RTi A1 Key Specs
- 2-way Design
- 1" Dome Tweeter
- 5.25" Polymer composite Woofer
- 60-26k Hz Frequency Response
- 89 dB Sensitivity
- Impedance: 8ohms
- Power Range:20-125watts
- Weight:5.44kg
- Dimensions (H x W x D): 304.8" x 7.3" x 11.5"( 304.8 x 187.5 x 292.1mm )
What size room are the Wharfedale 220 and Polk RTi A1 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
Wharfedale 220 |
Polk RTi A1 |
| Near-field |
Average |
Poor |
| Small Room |
Good |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Poor |
Average |
| Very Large Room |
Bad |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Wharfedale 220 and Polk RTi A1 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Diamond 220 and RTi A1 are 2-way speakers.
| Driver |
Wharfedale 220 |
Polk RTi A1 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5-inch
|
1 x 5.25-inch
|
Diamond 220 features a 1" Dome Tweeter and 1 x 5" Woven Kevlar Woofer with a Crossover frequency at 2200Hz. On the other hand, the RTi A1 features a 1" silk polymer composite Dome Tweeter and 1 x 5.25" Polymer composite Woofer with a Crossover frequency at 1900Hz.
Frequency Response
Diamond 220 has a frequency range of 56-20k Hz whereas RTi A1 has a frequency range of 60-26k Hz. With a minimum frequency of 56Hz, the Diamond 220 can go slightly deeper then the RTi A1's min frequency of 60Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Diamond 220 and RTi A1 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Diamond 220 sensitivity is rated at 86 dB and the RTi A1's is at 89 dB. This 3 dB difference makes the Polk RTi A1 a more sensitive speaker compared to Wharfedale 220, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Diamond 220 can handle a max power of 125 watts RMS from the amp the whereas Diamond 220 has a max power handling value of 100 watts RMS , 25 watts less than the RTi A1.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Diamond 220 and RTi A1 features dual binding post speaker terminals for bi-amping or bi-wiring.
Wharfedale 220's Post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Diamond 220 has a bottom firing port whereas RTi A1 has a back and front firing ports.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale 220's and Polk RTi A1's external dimensions. Wharfedale 220 has external dimensions of 315.0 x 174.0 x 255.0mm ( 12.4 x 6.8 x 10.0inch) whereas Polk RTi A1 has external dimensions of 304.8 x 187.5 x 292.1mm ( 12.0 x 7.3 x 11.5inch) .
Wharfedale 220 is 13.5mm narrower and 37.1mm less deeper than Polk RTi A1 but it is also 10.2mm taller.
Below you can see the front view size comparison of Wharfedale 220 and Polk RTi A1 in scale.
Comparison image of Wharfedale 220 and Polk RTi A1 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale 220 is approximately 443.7cm2 / 68.8inch2 and base area of the Polk RTi A1 is approximately 547.7cm2 / 84.9inch2. The Diamond 220 requires 19% less surface area than the RTi A1 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Wharfedale 220 and Polk RTi A1 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Wharfedale 220 weighs 5.32kg / 11.7lbs and the Polk RTi A1 weighs 5.44kg / 12lbs. This makes the RTi A1 2% heavier than the Diamond 220.
Here is a comparison of how Diamond 220 and RTi A1's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Wharfedale 220?
Here are the items that are included inside the box of Diamond 220:
2 Bookshelf loudspeakers 2 Grilles (pre-installed) 8 Self-adhesive rubber feet User's Manual Installation Guide
What's in the Box of Polk RTi A1?
Here are the items that come with the RTi A1:
2 Cherry bookshelf speakers 2 Self-tapping screws 8 Self-adhesive rubber feet Owner's Manual Template Online registration sheet Polk Audio product brochure