In this review, we will be comparing Diamond 12.1 and Q150, two Passive Bookshelf speakers from Wharfedale and KEF.
Let's have a brief look at the main features
of Wharfedale 12.1 and KEF Q150 first before getting into our more
detailed comparison.
| Key Specs | Wharfedale 12.1 | KEF Q150 |
|---|
| Brand | Wharfedale United Kingdom · founded 1932 | KEF United Kingdom · founded 1961 |
|---|
| Design | 2-way | 2-way |
|---|
| Uni-Q driver | — | 11th Generation Uni-Q |
|---|
| Tweeter | 1" Soft-Dome | 1" Dome |
|---|
| Woofer | 5" Mica-infused polypropylene | 5.25" Aluminum |
|---|
| Frequency response | 65-20k Hz | 51-28k Hz |
|---|
| Sensitivity | 88 dB | 86 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | 20-100 watts | 10-100 watts |
|---|
| Weight | 6.80kg / 15lbs | 5.60kg / 12.3lbs |
|---|
| Dimensions (H x W x D) | 12.2" x 7.0" x 10.9" 312.0 x 180.0 x 278.0mm | 11.9" x 7.0" x 10.9" 303.0 x 180.0 x 278.0mm |
|---|
What size room are the Wharfedale 12.1 and KEF Q150 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Wharfedale 12.1 |
KEF Q150 |
| Near-field |
Average |
Average |
| Small Room |
Good |
Good |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Poor |
| Very Large Room |
Bad |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both Diamond 12.1 and Q150 are 2-way speakers.
Wharfedale 12.1KEF Q150
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Wharfedale 12.1 |
KEF Q150 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5-inch
|
1 x 5.25-inch
|
Diamond 12.1 features a 1" Textile Soft-Dome Tweeter and 1 x 5" Mica-infused polypropylene Woofer with a Crossover frequency at 2600Hz. On the other hand, the Q150 features a 1" vented aluminum Dome Tweeter and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 2500Hz.
Frequency Response
Diamond 12.1 has a frequency range of 65-20k Hz whereas Q150 has a frequency range of 51-28k Hz. With a minimum frequency of 51Hz, the Q150 can go significantly deeper on the low side and provide stronger bass compared to the Diamond 12.1's min frequency of 65Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Diamond 12.1 and Q150 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Diamond 12.1 sensitivity is rated at 88 dB and the Q150's is at 86 dB. This 2 dB difference makes the Wharfedale 12.1 a more sensitive speaker compared to KEF Q150, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Both handle the same maximum of 100 watts RMS, though Diamond 12.1 is rated 20-100 watts and Q150 10-100 watts.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Diamond 12.1 features 5-way post posts which make bi-amping or bi-wiring possible. Q150 has a Post which doesn't feature bi-amping/bi-wiring.
KEF Q150's Post terminals
Cabinet Type and Port Position
Both Diamond 12.1 and Q150 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
KEF Q150 Port
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale 12.1's and KEF Q150's external dimensions. Wharfedale 12.1 has external dimensions of 312.0 x 180.0 x 278.0mm (12.2 x 7.0 x 10.9inch) whereas KEF Q150 has external dimensions of 303.0 x 180.0 x 278.0mm (11.9 x 7.0 x 10.9inch).
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Near-identical footprints.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale 12.1 is approximately 500.4cm2 / 77.6inch2 and base area of the KEF Q150 is approximately 500.4cm2 / 77.6inch2.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Wharfedale 12.1 weighs 6.80kg / 15lbs and the KEF Q150 weighs 5.60kg / 12.3lbs. This makes the Diamond 12.1 21% heavier than the Q150.
Here is a comparison of how Diamond 12.1 and Q150's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Wharfedale 12.1?
Here are the items that are included inside the box of Diamond 12.1:
- 2 Bookshelf loudspeakers
- 2 Grilles
- 4 Jumper-bars (pre-installed)
- 8 Self-adhesive rubber feet
- User-feets Manual
What's in the Box of KEF Q150?
Here are the items that come with the Q150:
- 2 Bookshelf loudspeakers
- 2 Foam port plugs
- 8 Self-adhesive rubber feet
- Owner's Manual
- Warranty Registration Card
Sensitivity |
88 dB
vs
86 dB
|
Play louder with same amount of amplification power |
Minimum Impedance |
4 ohms
vs
3.7 ohms
|
Very low impedance levels puts more pressure on amplifier |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Price per pair* |
449USD
vs
600USD
|
costs less (*prices may change depending on the seller, location and time) |
Woofer Size |
5.25 inches
vs
5 inches
|
Larger woofer |
Low Frequency Response |
51 Hz
vs
65 Hz
|
Generates deeper bass |
High Frequency Response |
28k Hz
vs
20k Hz
|
Generates higher frequency |
Height |
303mm
vs
312mm
|
Easier to fit in smaller spaces |
| General |
Wharfedale Diamond 12.1 |
KEF Q150 |
| Brand |
Wharfedale |
KEF |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
20-100 watts |
10-100 watts |
| Sensitivity |
88 dB |
86 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
4 ohms |
3.7 ohms |
| Frequency Response |
65-20k Hz |
51-28k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5" |
5.25" |
| Woofer Composition |
Mica-infused polypropylene |
Aluminum |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Soft-Dome |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2600Hz |
2500Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
312.0mm (12.3") |
303.0mm (11.9") |
| Width |
180.0mm (7.1") |
180.0mm (7.1") |
| Depth |
278.0mm (10.9") |
278.0mm (10.9") |
| Weight |
6.80kg (15lbs) |
5.60kg (12.3lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood veneer |
MDF/Vinyl-wrapped |
| Available Colors |
Walnut,Black,Oak,White |
Black, Walnut, White |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
24-28" |
18-24" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
No |
Other |
|
|
| Parts Warranty |
5 years |
5 Years |
| Labor Warranty |
5 years |
5 Years |
No single best speaker here - they are built to different priorities, and the right one depends on your room, your amplifier and what you listen to.
| Area | Better | Why |
|---|
| Bass | B | KEF Q150 digs deeper - 51Hz against 65Hz. |
| Amplifier needs | A | Wharfedale 12.1 is more sensitive (88dB vs 86dB), so it goes louder on the same amplifier. |
| Headroom | evenly matched | Similar power handling (100W vs 100W). |
| Size | depends | Similar cabinet size - neither is easier to fit. |
| Expandability | A | Wharfedale 12.1: bi-amping. Wharfedale 12.1 sits in a wider range (12 models), so a matched surround system is easier later. |
| Price | A | Wharfedale 12.1 is cheaper - $449 against $600, about 25% less. |
A Wharfedale 12.1 B KEF Q150
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Wharfedale 12.1 has the edge on paper, though the margin is not large. The rows marked "depends" may matter more to you than the score does. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 65Hz anyway, which makes the cheaper Wharfedale 12.1 much easier to justify. If your amplifier is modest, vintage or valve-based, Wharfedale 12.1 is the safer partner - the other will want more current or more watts to sound its best.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.