In this review, we will be comparing Denton 85 and Super Denton, two Passive Bookshelf speakers by Wharfedale Let's have a brief look at the main features
of Wharfedale Denton 85 and Wharfedale Super Denton first before getting into our more
detailed comparison.
Denton 85 and Super Denton are members of Wharfedale's Heritage series of speakers. Below you can find the loudspeakers from this series.
Wharfedale Heritage Series History
What size room are the Wharfedale Denton 85 and Wharfedale Super Denton speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Wharfedale Denton 85 and Wharfedale Super Denton compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Denton 85 is a 2-way design whereas the Super Denton is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Wharfedale Denton 85 |
Wharfedale Super Denton |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 2-inch |
|
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
Denton 85 features a 1" woven textile Soft-Dome Tweeter and 1 x 6.5" Woven Kevlar Woofer with a Crossover frequency at 3100Hz. On the other hand, the Super Denton features a 1" woven textile Soft-Dome Tweeter , a 2" Midrange and 1 x 6.5" Woven Kevlar Woofer with a Crossover frequency at 940Hz and 4.6kHz.
Frequency Response
Denton 85 has a frequency range of 45-20k Hz whereas Super Denton has a frequency range of 52-20k Hz. With a minimum frequency of 45Hz, the Denton 85 can go significantly deeper on the low side and provide stronger bass compared to the Super Denton's min frequency of 52Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Denton 85 is a 4 ohms speaker compared to the Super Denton which has a nominal impedance of 6 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Denton 85 can provide this impedance level.
These two speakers also have different sensitivity levels. Denton 85 sensitivity is rated at 88 dB and the Super Denton's is rated at 87 dB. This 1 dB difference makes the Wharfedale Denton 85 a more sensitive speaker compared to Wharfedale Super Denton, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Denton 85 and Super Denton features dual binding post speaker terminals for bi-amping or bi-wiring.
Wharfedale Denton 85's Post terminals allows Bi-amping or bi-wiring
Wharfedale Super Denton's Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both Denton 85 and Super Denton have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale Denton 85's and Wharfedale Super Denton's external dimensions. Wharfedale Denton 85 has external dimensions of 342.0 x 240.0 x 304.0mm ( 13-7/16 x 9-7/16 x 11-15/16inch) whereas Wharfedale Super Denton has external dimensions of 360 x 246 x 295mm ( 14-1/8inch x 9-11/16inch x 11-5/8inch ) .
Wharfedale Denton 85 is 6mm narrower and 18mm shorter than Wharfedale Super Denton but it is also 9mm deeper.
Below you can see the front view size comparison of Wharfedale Denton 85 and Wharfedale Super Denton in scale.
Comparison image of Wharfedale Denton 85 and Wharfedale Super Denton Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale Denton 85 is approximately 729.6cm2 / 113.1inch2 and base area of the Wharfedale Super Denton is approximately 725.7cm2 / 112.5inch2. The Denton 85 requires 1% more surface area than the Super Denton which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Wharfedale Denton 85 weighs 9.00kg / 19.8lbs and the Wharfedale Super Denton weighs 9.20kg / 20.2lbs. This makes the Super Denton 2% heavier than the Denton 85.
Here is a comparison of how Denton 85 and Super Denton's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Wharfedale Denton 85?
Here are the items that are included inside the box of Denton 85:
2 Bookshelf loudspeakers 2 Grilles 4 Jumper-bars (pre-installed) 8 Self-adhesive rubber feet Pair of white cloth gloves User Manual
What's in the Box of Wharfedale Super Denton?
Here are the items that come with the Super Denton:
2 Bookshelf loudspeakers 2 Grilles 4 Jumper-bars (pre-installed) 8 Self-adhesive rubber feet Pair of white cloth gloves User Manual
 Sensitivity |
88 dB
vs
87 dB
|
Play louder with same amount of amplification power |
 Minimum Impedance |
3.8 ohms
vs
3.4 ohms
|
Very low impedance levels puts more pressure on amplifier |
 Low Frequency Response |
45 Hz
vs
52 Hz
|
Generates deeper bass |
 Height |
342mm
vs
360mm
|
Easier to fit in smaller spaces |
 Price per pair* |
999USD
vs
1399USD
|
costs less (*prices may change depending on the seller, location and time) |
 Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
 Nominal Impedance |
6 ohms
vs
4 ohms
|
Less selective with amplifiers |
 Base Surface Area |
725cm2 (246x295mm)
vs
729cm2 (240x304mm)
|
Takes less floor space |
| General |
Wharfedale Denton 85 |
Wharfedale Super Denton |
| Brand |
Wharfedale |
Wharfedale |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
20-120 watts |
25-120 watts |
| Sensitivity |
88 dB |
87 dB |
| Impedance |
4 ohms |
6 ohms |
| Impedance |
3.8 ohms |
3.4 ohms |
| Frequency Response |
45-20k Hz |
52-20k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
Woven Kevlar |
Woven Kevlar |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Soft-Dome |
Soft-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
2" |
| Crossover Frequency |
3100Hz |
940Hz and 4.6kHz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
342.0mm (13.5") |
360.0mm (14.2") |
| Width |
240.0mm (9.4") |
246.0mm (9.7") |
| Depth |
304.0mm (12") |
295.0mm (11.6") |
| Weight |
9.00kg (19.8lbs) |
9.20kg (20.2lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood Veneer |
MDF/Wood Veneer |
| Available Colors |
Walnut, Mahogany, Black |
Red Mahogany, Black Oak, Walnut |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
24-28" |
24-28" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |