In this review, we will be comparing D320 and R-51M, two Passive Bookshelf speakers from Wharfedale and Klipsch.
Let's have a brief look at the main features
of Wharfedale D320 and Klipsch R-51M first before getting into our more
detailed comparison.
| Key Specs | Wharfedale D320 | Klipsch R-51M |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | 1" Soft-Dome | 1" Tractrix Horn |
|---|
| Woofer | 5" Woven Kevlar | 5.25" Copper-spun IMG |
|---|
| Frequency response | 56-20k Hz | 62-21k Hz |
|---|
| Sensitivity | 87 dB | 93 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | 25-100 watts | Up to 85 watts |
|---|
| Weight | 6.02kg / 13.2lbs | 5.00kg / 11lbs |
|---|
| Dimensions (H x W x D) | 12-5/8" x 7-1/8" x 10-7/8"
321.0 x 181.0 x 277.0mm | 13.3" x 7.0" x 8.4"
338.0 x 178.0 x 215.0mm |
|---|
What size room are the Wharfedale D320 and Klipsch R-51M speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Wharfedale D320 |
Klipsch R-51M |
| Near-field |
Average |
Average |
| Small Room |
Good |
Good |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Poor |
| Very Large Room |
Bad |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking
through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both D320 and R-51M are 2-way speakers.
Wharfedale D320Klipsch R-51M
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Wharfedale D320 |
Klipsch R-51M |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5-inch
|
1 x 5.25-inch
|
D320 features a 1" Soft-Dome Tweeter and 1 x 5" Woven Kevlar Woofer. On the other hand, the R-51M features a 1" Tractrix Horn Tweeter and 1 x 5.25" Copper-spun IMG Woofer with a Crossover frequency at 1660Hz.
Frequency Response
D320 has a frequency range of 56-20k Hz whereas R-51M has a frequency range of 62-21k Hz. With a minimum frequency of 56Hz, the D320 can go significantly deeper on the low side and provide stronger bass compared to the R-51M's min frequency of 62Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
D320 and R-51M have the same Impedance of 8 ohms but where they differ is the sensitivity levels. D320 sensitivity is rated at 87 dB and the R-51M's is at 93 dB. This 6 dB difference makes the Klipsch R-51M a more sensitive speaker compared to Wharfedale D320, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
D320 can handle a max power of 100 watts RMS, whereas R-51M has a max power handling value of 85 watts RMS, 15 watts less than the D320.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier — change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
D320 features Single Gold Plated Binding Posts - 5-way type posts and R-51M has a Single Gold Plated Binding Posts - 5-way type posts. None of these speakers feature bi-amping/bi-wiring.
Wharfedale D320's Post terminals
Klipsch R-51M's Single Gold Plated Binding Posts - 5-way terminals
Cabinet Type and Port Position
D320 has a bottom firing port whereas R-51M has a rear firing ports. Wharfedale D320's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Klipsch R-51M with its rear-firing port.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale D320's and Klipsch R-51M's external dimensions. Wharfedale D320 has external dimensions of 321.0 x 181.0 x 277.0mm (12-5/8 x 7-1/8 x 10-7/8inch) whereas Klipsch R-51M has external dimensions of 338.0 x 178.0 x 215.0mm (13.3 x 7.0 x 8.4inch).
Klipsch R-51M is 3mm narrower and 62mm less deeper than Wharfedale D320 but it is also 17mm taller.
Below you can see the front view size comparison of Wharfedale D320 and Klipsch R-51M in scale.
Comparison image of Wharfedale D320 and Klipsch R-51M Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale D320 is approximately 501.4cm2 / 77.7inch2 and base area of the Klipsch R-51M is approximately 382.7cm2 / 59.3inch2. The D320 requires 31% more surface area than the R-51M which gives it a small disadvantage on placement in tight spaces.
Here is another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Wharfedale D320 and Klipsch R-51M on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Wharfedale D320 weighs 6.02kg / 13.2lbs and the Klipsch R-51M weighs 5.00kg / 11lbs. This makes the D320 20% heavier than the R-51M.
Here is a comparison of how D320 and R-51M's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Wharfedale D320?
Here are the items that are included inside the box of D320:
- 2 Bookshelf loudspeakers
- 2 Tweeter grilles (pre-installed)
- 2 Woofer grilles (pre-installed)
- User-feets Manual
- Installation Guide
What's in the Box of Klipsch R-51M?
Here are the items that come with the R-51M:
- 2 Bookshelf loudspeakers
- 2 Grilles (installed)
- 8 Self-adhesive rubber feet
- Quick Setup Guide
- Important Safety Instructions
- Warranty Information
 Max Input Power |
100 watts
vs
85 watts
|
Handle more power from your amplifier |
 Low Frequency Response |
56 Hz
vs
62 Hz
|
Generates deeper bass |
 Height |
321mm
vs
338mm
|
Easier to fit in smaller spaces |
 Price per pair* |
249USD
vs
359USD
|
costs less (*prices may change depending on the seller, location and time) |
 Sensitivity |
93 dB
vs
87 dB
|
Play louder with same amount of amplification power |
|
Woofer Size |
5.25 inches
vs
5 inches
|
Larger woofer |
 High Frequency Response |
21k Hz
vs
20k Hz
|
Generates higher frequency |
 Base Surface Area |
382cm2
vs
501cm2
|
Takes less floor space |
| General |
Wharfedale D320 |
Klipsch Reference R-51M |
| Brand |
Wharfedale |
Klipsch |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
25-100 watts |
Up to 85 watts |
| Sensitivity |
87 dB |
93 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
3.8 ohms |
n/a |
| Frequency Response |
56-20k Hz |
62-21k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5" |
5.25" |
| Woofer Composition |
Woven Kevlar |
Copper-spun IMG |
| Woofer Surround Material |
Foamed Polyether |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Soft-Dome |
Tractrix Horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
1660Hz |
| Firing Direction |
bottom |
rear |
Physical Specs |
|
|
| Height |
321.0mm (12.6") |
338.0mm (13.3") |
| Width |
181.0mm (7.1") |
178.0mm (7") |
| Depth |
277.0mm (10.9") |
215.0mm (8.5") |
| Weight |
6.02kg (13.2lbs) |
5.00kg (11lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Rosewood, Black, White, Walnut |
Black |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
22-24" |
24-28" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |
A generation apart: Klipsch R-51M is the newer design, against a 2014 model. Newer is not automatically better, but the older one is more likely to be discounted or near run-out.
| Area | Better | Why |
|---|
| Bass |
A |
Wharfedale D320 digs deeper - 56Hz against 62Hz. A subwoofer would even that out. |
| Amplifier needs |
B |
Klipsch R-51M is more sensitive (93dB vs 87dB), so it goes louder on the same amplifier. |
| Headroom |
evenly matched |
Similar power handling (100W vs 85W). |
| Size |
depends |
Similar cabinet size - neither is easier to fit. |
| Price |
A |
Wharfedale D320 is cheaper - $249 against $359, about 31% less. |
A Wharfedale D320
B Klipsch R-51M
depends neither is better in the abstract - it turns on your room, placement or how you will use them.
Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Neither runs away with it - they trade advantages. Let the "depends" rows and your own room settle it. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 62Hz anyway, so judge these on the other rows instead. If your amplifier is modest, vintage or valve-based, Klipsch R-51M is the safer partner - the other will want more current or more watts to sound its best.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.