In this review, we will be comparing Borea BR02 and RP-600M, two Passive Bookshelf speakers from Triangle and Klipsch. Let's have a brief look at the main features
of Triangle Borea BR02 and Klipsch RP-600M first before getting into our more
detailed comparison.
Triangle Borea BR02 Key Specs
- 2-way Design
- 1" Tweeter
- 5" fiberglass Woofer
- 51 - 22k Hz Frequency Response
- 89 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 80watts
- Weight:4.87kg
- Dimensions (H x W x D): 310.0" x 6.9" x 10.7"( 310.0 x 176.0 x 274.0mm )
Klipsch RP-600M Key Specs
- 2-way Design
- 1" Tractrix Horn Tweeter
- 6.5" Cerametallic Woofer
- 45-25k Hz Frequency Response
- 96 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 100watts
- Weight:7.30kg
- Dimensions (H x W x D): 399.0" x 7.9" x 11.8"( 399.0 x 202.0 x 301.0mm )
What size room are the Triangle Borea BR02 and Klipsch RP-600M speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
Triangle Borea BR02 |
Klipsch RP-600M |
| Near-field |
Average |
Average |
| Small Room |
Good |
Good |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Poor |
| Very Large Room |
Bad |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Triangle Borea BR02 and Klipsch RP-600M compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Borea BR02 and RP-600M are 2-way speakers.
| Driver |
Triangle Borea BR02 |
Klipsch RP-600M |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5-inch
|
1 x 6.5-inch
|
Borea BR02 features a 1" silk Tweeter and 1 x 5" fiberglass Woofer with a Crossover frequency at 2900Hz. On the other hand, the RP-600M features a 1" Tractrix Horn Tweeter and 1 x 6.5" Cerametallic Woofer with a Crossover frequency at 1500Hz.
Frequency Response
Borea BR02 has a frequency range of 51 - 22k Hz whereas RP-600M has a frequency range of 45-25k Hz. With a minimum frequency of 45Hz, the RP-600M can go significantly deeper on the low side and provide stronger bass compared to the Borea BR02's min frequency of 51Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Borea BR02 and RP-600M have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Borea BR02 sensitivity is rated at 89 dB and the RP-600M's is at 96 dB. This 7 dB difference makes the Klipsch RP-600M a more sensitive speaker compared to Triangle Borea BR02, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Borea BR02 can handle a max power of 100 watts RMS from the amp the whereas Borea BR02 has a max power handling value of 80 watts RMS , 20 watts less than the RP-600M.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RP-600M features Dual binding posts/bi-wire/bi-amp posts which make bi-amping or bi-wiring possible. Borea BR02 has a Binding post which doesn't feature bi-amping/bi-wiring.
Triangle Borea BR02's Binding post terminals
Klipsch RP-600M's Dual binding posts/bi-wire/bi-amp terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both Borea BR02 and RP-600M have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Klipsch RP-600M Tractrix horn-shaped Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Triangle Borea BR02's and Klipsch RP-600M's external dimensions. Triangle Borea BR02 has external dimensions of 310.0 x 176.0 x 274.0mm ( 12.2 x 6.9 x 10.7inch) whereas Klipsch RP-600M has external dimensions of 399.0 x 202.0 x 301.0mm ( 15.7 x 7.9 x 11.8inch) .
Klipsch RP-600M is clearly the larger of the two speakers. Its body is 26mm wider, 89mm taller and 27mm deeper than Triangle Borea BR02.
Below you can see the front view size comparison of Triangle Borea BR02 and Klipsch RP-600M in scale.
Comparison image of Triangle Borea BR02 and Klipsch RP-600M Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Triangle Borea BR02 is approximately 482.2cm2 / 74.7inch2 and base area of the Klipsch RP-600M is approximately 608.0cm2 / 94.2inch2. The Borea BR02 requires 21% less surface area than the RP-600M which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Triangle Borea BR02 and Klipsch RP-600M on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Triangle Borea BR02 weighs 4.87kg / 10.7lbs and the Klipsch RP-600M weighs 7.30kg / 16.1lbs. This makes the RP-600M 50% heavier than the Borea BR02.
Here is a comparison of how Borea BR02 and RP-600M's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Triangle Borea BR02?
Here are the items that are included inside the box of Borea BR02:
2 x Borea speakers 2 x protections grids 8 x adhesive rubber plots 1 x user manual
What's in the Box of Klipsch RP-600M?
Here are the items that come with the RP-600M:
2 Bookshelf loudspeakers2 Grilles (installed)8 Self-adhesive rubber feet4 Terminal jumpers (installed)User ManualImportant Safety InstructionsWarranty Information