In this review, we will be comparing Olympica I and R3, two Passive Bookshelf speakers from Sonus faber and KEF.
Let's have a brief look at the main features
of Sonus faber Olympica I and KEF R3 first before getting into our more
detailed comparison.
| Key Specs | Sonus faber Olympica I | KEF R3 |
|---|
| Brand | Sonus faber
Italy · founded 1983 | KEF
United Kingdom · founded 1961 |
|---|
| Design | 2-way | 3-way |
|---|
| Uni-Q driver | — | 12th Generation Uni-Q |
|---|
| Tweeter | 1.1" Soft-Dome | 1" Dome |
|---|
| Midrange | — | 5" |
|---|
| Woofer | 6.5" Paper | 6.5" Hybrid aluminum |
|---|
| Frequency response | 57-40k Hz | 52-28k Hz |
|---|
| Sensitivity | 87 dB | 87 dB |
|---|
| Impedance | 4 ohms | 8 ohms |
|---|
| Power range | 30-250 watts | 15-180 watts |
|---|
| Weight | 11.00kg / 24.2lbs | 13.55kg / 29.8lbs |
|---|
| Dimensions (H x W x D) | 14-9/16" x 8-1/4" x 14-9/16"
370.0 x 210.0 x 370.0mm | 16-5/8" x 7-13/16" x 13-1/4"
423.0 x 199.0 x 337.0mm |
|---|
What size room are the Sonus faber Olympica I and KEF R3 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Sonus faber Olympica I |
KEF R3 |
| Near-field |
Good |
Poor |
| Small Room |
Good |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Poor |
Average |
| Very Large Room |
No way |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
One of the fundamental differences between these two speakers is that Olympica I is a 2-way design whereas the R3 is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Sonus faber Olympica IKEF R3
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Sonus faber Olympica I |
KEF R3 |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1.1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 5-inch |
|
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
Olympica I features a 1.1" Silk Soft-Dome Tweeter and 1 x 6.5" Paper Woofer with a Crossover frequency at 2300 Hz. On the other hand, the R3 features a 1" aluminum Dome Tweeter, a 5" Midrange and 1 x 6.5" Hybrid aluminum Woofer with a Crossover frequency at 400Hz and 2900Hz.
Frequency Response
Olympica I has a frequency range of 57-40k Hz whereas R3 has a frequency range of 52-28k Hz. With a minimum frequency of 52Hz, the R3 can go significantly deeper on the low side and provide stronger bass compared to the Olympica I's min frequency of 57Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Olympica I is a 4 ohms speaker compared to the R3 which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Olympica I can provide this impedance level.
On the other hand, they have the same sensitivity of 87 dBdB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Olympica I can handle a max power of 250 watts RMS, whereas R3 has a max power handling value of 180 watts RMS, 70 watts less than the Olympica I.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Both Olympica I and R3 features dual binding post speaker terminals for bi-amping or bi-wiring.
KEF R3 Port
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus faber Olympica I's and KEF R3's external dimensions. Sonus faber Olympica I has external dimensions of 370.0 x 210.0 x 370.0mm (14-9/16 x 8-1/4 x 14-9/16inch) whereas KEF R3 has external dimensions of 423.0 x 199.0 x 337.0mm (16-5/8 x 7-13/16 x 13-1/4inch).
KEF R3 is 11mm narrower and 33mm less deeper than Sonus faber Olympica I but it is also 53mm taller.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Sonus faber Olympica I needs about 16% more floor or shelf area. Sonus faber Olympica I is 33mm deeper, so it stands that much further out from the wall. KEF R3 is 53mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sonus faber Olympica I is approximately 777.0cm2 / 120.4inch2 and base area of the KEF R3 is approximately 670.6cm2 / 103.9inch2. The Olympica I requires 16% more surface area than the R3 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Sonus faber Olympica I weighs 11.00kg / 24.2lbs and the KEF R3 weighs 13.55kg / 29.8lbs. This makes the R3 23% heavier than the Olympica I.
Here is a comparison of how Olympica I and R3's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of KEF R3?
Here are the items that come with the R3:
- 2 Bookshelf loudspeakers
- 2 Grilles
- 2 Foam port plugs
- 8 Self-adhesive rubber feet
- User Manual
- Warranty Information
 Max Input Power |
250 watts
vs
180 watts
|
Handle more power from your amplifier |
 High Frequency Response |
40k Hz
vs
28k Hz
|
Generates higher frequency |
 Height |
370mm
vs
423mm
|
Easier to fit in smaller spaces |
 Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
 Low Frequency Response |
52 Hz
vs
57 Hz
|
Generates deeper bass |
 Base Surface Area |
670cm2
vs
777cm2
|
Takes less floor space |
 Price per pair* |
2200USD
vs
6500USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Sonus faber Olympica I |
KEF R3 |
| Brand |
Sonus faber |
KEF |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
30-250 watts |
15-180 watts |
| Sensitivity |
87 dB |
87 dB |
| Impedance |
4 ohms |
8 ohms |
| Impedance |
n/a |
3.2 ohms |
| Frequency Response |
57-40k Hz |
52-28k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
Paper |
Hybrid aluminum |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
1.1" |
1" |
| Tweeter Type |
Soft-Dome |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
5" |
| Crossover Frequency |
2300 Hz |
400Hz and 2900Hz |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
370.0mm (14.6") |
423.0mm (16.7") |
| Width |
210.0mm (8.3") |
199.0mm (7.8") |
| Depth |
370.0mm (14.6") |
337.0mm (13.3") |
| Weight |
11.00kg (24.2lbs) |
13.55kg (29.8lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF/Lacquer |
| Available Colors |
n/a |
Black Gloss, White Gloss, Walnut |
| Mounting Bracket |
|
No |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
|
5 Years |
| Labor Warranty |
|
5 Years |
These sit in different price classes - Sonus faber Olympica I costs roughly 3x what KEF R3 does. Expect it to lead on paper; the question is whether the gap is audible enough in your room to be worth it.
| Area | Better | Why |
|---|
| Bass | B | KEF R3 digs deeper - 52Hz against 57Hz. A subwoofer would even that out. |
| Amplifier needs | evenly matched | Similar sensitivity (87dB vs 87dB) - both want much the same power. |
| Amplifier match | B | KEF R3 is the easier load at 8 ohms; the other is 4 ohms and wants an amplifier rated for it. |
| Headroom | A | Sonus faber Olympica I takes more power (250W vs 180W) - more in hand in a big room. |
| Size | depends | Similar cabinet size - neither is easier to fit. |
| Expandability | depends | Sonus faber Olympica I: bi-amping; KEF R3: bi-amping. |
| Price | B | KEF R3 is cheaper - $2,200 against $6,500, about 66% less; arguably a different class. |
A Sonus faber Olympica I B KEF R3
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
KEF R3 has the edge on paper, though the margin is not large. The rows marked "depends" may matter more to you than the score does. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 57Hz anyway, so judge these on the other rows instead. Match it to your room: we rate Sonus faber Olympica I the better fit for near-field listening and a small room, and KEF R3 for a mid-size room and a large room.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.