In this review, we will be comparing two different types of speakers. Sonus faber Concertino is a Bookshelf speaker whereas the R7 is a Floor-standing speaker.
Let's have a brief look at the main features
of Sonus faber Concertino and KEF R7 first before getting into our more
detailed comparison.
| Key Specs | Sonus faber Concertino | KEF R7 |
|---|
| Brand | Sonus faber Italy · founded 1983 | KEF United Kingdom · founded 1961 |
|---|
| Design | 2-way | 3-way |
|---|
| Uni-Q driver | — | 12th Generation Uni-Q |
|---|
| Tweeter | 1.1" Soft-Dome | 1" Dome |
|---|
| Midrange | — | 5" |
|---|
| Woofer | 5.25" Paper | 2 x 6.5" Hybrid Aluminum |
|---|
| Frequency response | 60-25k Hz | 48-28k Hz |
|---|
| Sensitivity | 85 dB | 88 dB |
|---|
| Impedance | 4 ohms | 8 ohms |
|---|
| Power range | 30-150 watts | 15-250 watts |
|---|
| Weight | 6.60kg / 14.5lbs | 31.40kg / 69.1lbs |
|---|
| Dimensions (H x W x D) | 12-3/8" x 8-7/16" x 11-11/16" 314.0 x 214.0 x 297.0mm | 43-13/16" x 8" x 15-5/16" 1113.0 x 200.0 x 389.0mm |
|---|
What size room are the Sonus faber Concertino and KEF R7 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Sonus faber Concertino |
KEF R7 |
| Near-field |
Good |
Bad |
| Small Room |
Good |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Good |
| Very Large Room |
No way |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
One of the fundamental differences between these two speakers is that Concertino is a 2-way design whereas the R7 is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Sonus faber ConcertinoKEF R7
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Sonus faber Concertino |
KEF R7 |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1.1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 5-inch |
|
Woofer
|
1 x 5.25-inch
|
2 x 6.5-inch
|
Concertino features a 1.1" Silk Soft-Dome Tweeter and 1 x 5.25" Paper Woofer with a Crossover frequency at 1700Hz. On the other hand, the R7 features a 1" aluminum Dome Tweeter, a 5" Midrange and 2 x 6.5" Hybrid Aluminum Woofer with a Crossover frequency at 400Hz and 2900Hz.
Frequency Response
Concertino has a frequency range of 60-25k Hz whereas R7 has a frequency range of 48-28k Hz. With a minimum frequency of 48Hz, the R7 can go significantly deeper on the low side and provide stronger bass compared to the Concertino's min frequency of 60Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Concertino is a 4 ohms speaker compared to the R7 which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Concertino can provide this impedance level.
These two speakers also have different sensitivity levels. Concertino sensitivity is rated at 85 dB and the R7's is rated at 88 dB. This 3 dB difference makes the KEF R7 a more sensitive speaker compared to Sonus faber Concertino, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
R7 can handle a max power of 250 watts RMS, whereas Concertino has a max power handling value of 150 watts RMS, 100 watts less than the R7.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Both Concertino and R7 features dual binding post speaker terminals for bi-amping or bi-wiring.
KEF R7's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus faber Concertino's and KEF R7's external dimensions. Sonus faber Concertino has external dimensions of 314.0 x 214.0 x 297.0mm (12-3/8 x 8-7/16 x 11-11/16inch) whereas KEF R7 has external dimensions of 1113.0 x 200.0 x 389.0mm (43-13/16 x 8 x 15-5/16inch).
Sonus faber Concertino is 799mm shorter and 92mm less deeper than KEF R7 but it is also 14mm wider.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
KEF R7 needs about 22% more floor or shelf area. KEF R7 is 92mm deeper, so it stands that much further out from the wall. KEF R7 is 799mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sonus faber Concertino is approximately 635.6cm2 / 98.5inch2 and base area of the KEF R7 is approximately 778.0cm2 / 120.6inch2. The Concertino requires 18% less surface area than the R7 which gives it a small advantage on placement in tight spaces.
What's in the Box of KEF R7?
Here are the items that come with the R7:
- Floorstanding loudspeaker
- Grille
- 2 Foam port plugs
- 4 Outrigger feet
- 4 Spikes
- 4 Protective discs
- 4 Screws
- 4 Washers
- Wrench
- Hex-key
- User Manual
- Warranty Information