In this review, we will be comparing Amati and Silver 500 7G, two Passive Floor-standing speakers from Sonus faber and Monitor Audio.
Let's have a brief look at the main features
of Sonus faber Amati and Monitor Audio Silver 500 7G first before getting into our more
detailed comparison.
| Key Specs | Sonus faber Amati | Monitor Audio Silver 500 7G |
|---|
| Brand | Sonus faber
Italy · founded 1983 | Monitor Audio
United Kingdom · founded 1972 |
|---|
| Design | 4-way | 3-way |
|---|
| Tweeter | 1.1" Soft-Dome | 1" gold dome C-CAM with Uniform Dispersion (UD) Waveguide II |
|---|
| Midrange | 6" | 3" |
|---|
| Woofer | 2 x 8.5" Paper | 2 x 8" C-CAM RST II |
|---|
| Frequency response | 28-35k Hz | 27-35k Hz |
|---|
| Sensitivity | 91 dB | 90.5 dB |
|---|
| Impedance | 4 ohms | 8 ohms |
|---|
| Power range | 50-450 watts | 80-250 watts |
|---|
| Weight | 61.00kg / 134.2lbs | 22.53kg / 49.6lbs |
|---|
| Dimensions (H x W x D) | 46-5/16" x 16-3/16" x 20-3/16"
1176.0 x 411.0 x 512.0mm | 42-11/16" x 12-11/16" x 15-7/16"
1085.0 x 323.0 x 393.0mm |
|---|
What size room are the Sonus faber Amati and Monitor Audio Silver 500 7G speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Sonus faber Amati |
Monitor Audio Silver 500 7G |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
One of the fundamental differences between these two speakers is that Amati is a 4-way design whereas the Silver 500 7G is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Sonus faber AmatiMonitor Audio Silver 500 7G
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Sonus faber Amati |
Monitor Audio Silver 500 7G |
|
Driver Setup
|
4-way
|
3-way
|
|
Tweeter
|
1.1-inch
|
1-inch
|
|
Midrange
|
1 x 6-inch |
1 x 3-inch |
|
Woofer
|
2 x 8.5-inch
|
2 x 8-inch
|
Amati features a 1.1" Silk Soft-Dome Tweeter, a 6" Midrange and 2 x 8.5" Paper Woofer with a Crossover frequency at 200, 270, 2200 Hz. On the other hand, the Silver 500 7G features a 1" gold dome C-CAM with Uniform Dispersion (UD) Waveguide II Tweeter, a 3" Midrange and 2 x 8" C-CAM RST II Woofer.
Frequency Response
Amati has a frequency range of 28-35k Hz whereas Silver 500 7G has a frequency range of 27-35k Hz. With a minimum frequency of 27Hz, the Silver 500 7G can go slightly deeper then the Amati's min frequency of 28Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Amati is a 4 ohms speaker compared to the Silver 500 7G which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Amati can provide this impedance level.
These two speakers also have different sensitivity levels. Amati sensitivity is rated at 91 dB and the Silver 500 7G's is rated at 90.5 dB.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Amati can handle a max power of 450 watts RMS, whereas Silver 500 7G has a max power handling value of 250 watts RMS, 200 watts less than the Amati.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Monitor Audio Silver 500 7G
Input Type and Bi-Amping / Bi-Wiring
Both Amati and Silver 500 7G features dual binding post speaker terminals for bi-amping or bi-wiring.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus faber Amati's and Monitor Audio Silver 500 7G's external dimensions. Sonus faber Amati has external dimensions of 1176.0 x 411.0 x 512.0mm (46-5/16 x 16-3/16 x 20-3/16inch) whereas Monitor Audio Silver 500 7G has external dimensions of 1085.0 x 323.0 x 393.0mm (42-11/16 x 12-11/16 x 15-7/16inch).
Sonus faber Amati is clearly the larger of the two speakers. Its body is 88mm wider, 91mm taller and 119mm deeper than Monitor Audio Silver 500 7G.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Sonus faber Amati needs about 66% more floor or shelf area. Sonus faber Amati is 119mm deeper, so it stands that much further out from the wall. Sonus faber Amati is 91mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sonus faber Amati is approximately 2104.3cm2 / 326.2inch2 and base area of the Monitor Audio Silver 500 7G is approximately 1269.4cm2 / 196.8inch2. The Amati requires 66% more surface area than the Silver 500 7G which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Sonus faber Amati weighs 61.00kg / 134.2lbs and the Monitor Audio Silver 500 7G weighs 22.53kg / 49.6lbs. This makes the Amati 171% heavier than the Silver 500 7G.
Here is a comparison of how Amati and Silver 500 7G's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
Monitor Audio Silver 500 7G
What's in the Box of Monitor Audio Silver 500 7G?
Here are the items that come with the Silver 500 7G:
- Floorstanding loudspeaker
- Grille
- 4 Outrigger feet
- 4 Rubber feet (pre-installed on outrigger feet)
- 4 Spikes
- 4 Bolts
- 4 Machine screws
- 2 Foam port plugs
- 2 Hex-keys
- Owners Manual
- Important Safety Instructions
 Max Input Power |
450 watts
vs
250 watts
|
Handle more power from your amplifier |
 Driver Setup |
4-way
vs
3-way
|
Have a dedicated mid-range driver |
 Woofer Size |
8.5 inches
vs
8 inches
|
Larger woofer |
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
|
Low Frequency Response |
27 Hz
vs
28 Hz
|
Generates deeper bass |
 Height |
1085mm
vs
1176mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1269cm2
vs
2104cm2
|
Takes less floor space |
 Price per pair* |
3200USD
vs
29998USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Sonus faber Amati |
Monitor Audio Silver 500 7G |
| Brand |
Sonus faber |
Monitor Audio |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
50-450 watts |
80-250 watts |
| Sensitivity |
91 dB |
90.5 dB |
| Impedance |
4 ohms |
8 ohms |
| Frequency Response |
28-35k Hz |
27-35k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
8.5" |
8" |
| Woofer Composition |
Paper |
C-CAM RST II |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
1.1" |
1" |
| Tweeter Type |
Soft-Dome |
gold dome C-CAM with Uniform Dispersion (UD) Waveguide II |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
6" |
3" |
| Crossover Frequency |
200, 270, 2200 Hz |
n/a |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
1176.0mm (46.3") |
1085.0mm (42.7") |
| Width |
411.0mm (16.2") |
323.0mm (12.7") |
| Depth |
512.0mm (20.2") |
393.0mm (15.5") |
| Weight |
61.00kg (134.2lbs) |
22.53kg (49.6lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF/Wood veneer |
| Available Colors |
n/a |
Oak |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
|
5 Years |
| Labor Warranty |
|
5 Years |
These sit in different price classes - Sonus faber Amati costs roughly 9.4x what Monitor Audio Silver 500 7G does. Expect it to lead on paper; the question is whether the gap is audible enough in your room to be worth it.
| Area | Better | Why |
|---|
| Bass | evenly matched | Much the same reach (28Hz vs 27Hz). |
| Amplifier needs | evenly matched | Similar sensitivity (91dB vs 91dB) - both want much the same power. |
| Amplifier match | B | Monitor Audio Silver 500 7G is the easier load at 8 ohms; the other is 4 ohms and wants an amplifier rated for it. |
| Headroom | A | Sonus faber Amati takes more power (450W vs 250W) - more in hand in a big room. |
| Size | depends | Monitor Audio Silver 500 7G is easier to place; Sonus faber Amati is bigger, which usually goes with fuller bass. Your room decides. |
| Expandability | depends | Sonus faber Amati: bi-amping; Monitor Audio Silver 500 7G: bi-amping. |
| Price | B | Monitor Audio Silver 500 7G is cheaper - $3,200 against $29,998, about 89% less; arguably a different class. |
A Sonus faber Amati B Monitor Audio Silver 500 7G
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Neither runs away with it - they trade advantages. Let the "depends" rows and your own room settle it. In a large or open-plan room, Sonus faber Amati has the cabinet volume to fill it more easily; in a small room, near a wall or at desk distance, Monitor Audio Silver 500 7G is the easier speaker to get right. If your amplifier is modest, vintage or valve-based, Monitor Audio Silver 500 7G is the safer partner - the other will want more current or more watts to sound its best.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.