In this review, we will be comparing Lumina V and Kendall, two Passive Floor-standing speakers from Sonus Faber and KLH. Let's have a brief look at the main features
of Sonus Lumina V and KLH Kendall first before getting into our more
detailed comparison.
In the following sections, we will get into more detail in order to better understand how the Sonus Lumina V and KLH Kendall compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Lumina V and Kendall are 3-way speakers.
| Driver |
Sonus Lumina V |
KLH Kendall |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1.15-inch
|
1-inch
|
|
Midrange
|
1 x 6-inch |
1 x 5.25-inch |
|
Woofer
|
2 x 6.5-inch
|
2 x 6.5-inch
|
Lumina V features a 1.15" high definition DAD Tweeter , a 6" Midrange and 2 x 6.5" paper cone Woofer with a Crossover frequency at 260 and 2600 Hz. On the other hand, the Kendall features a 1" anodized aluminum Tweeter , a 5.25" Midrange and 2 x 6.5" Woven Kevlar Woofer .
Frequency Response
Lumina V has a frequency range of 38-24k Hz whereas Kendall has a frequency range of 25-23k Hz. With a minimum frequency of 25Hz, the Kendall can go significantly deeper on the low side and provide stronger bass compared to the Lumina V's min frequency of 38Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Lumina V is a 4 ohms speaker compared to the Kendall which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Lumina V can provide this impedance level.
These two speakers also have different sensitivity levels. Lumina V sensitivity is rated at 90 dB and the Kendall's is rated at 96 dB. This 6 dB difference makes the KLH Kendall a more sensitive speaker compared to Sonus Lumina V, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Lumina V can handle a max power of 300 watts RMS from the amp the whereas Kendall has a max power handling value of watts RMS, 300 watts less than the Lumina V.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Lumina V and Kendall features dual binding post speaker terminals for bi-amping or bi-wiring.
KLH Kendall's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus Lumina V's and KLH Kendall's external dimensions. Sonus Lumina V has external dimensions of 1049.0 x 280.0 x 373.0mm ( 41.3 x 11 x 14.7inch) whereas KLH Kendall has external dimensions of 1021.0 x 212.0 x 380.0mm ( 40-3/16 x 8-5/16 x 14-15/16inch) .
KLH Kendall is 68mm narrower and 28mm shorter than Sonus Lumina V but it is also 7mm deeper.
Below you can see the front view size comparison of Sonus Lumina V and KLH Kendall in scale.
Comparison image of Sonus Lumina V and KLH Kendall Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sonus Lumina V is approximately 1044.4cm2 / 161.9inch2 and base area of the KLH Kendall is approximately 805.6cm2 / 124.9inch2. The Lumina V requires 30% more surface area than the Kendall which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Sonus Lumina V weighs 22.50kg / 49.5lbs and the KLH Kendall weighs 22.14kg / 48.7lbs. This makes the Lumina V 2% heavier than the Kendall.
Here is a comparison of how Lumina V and Kendall's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Sonus Lumina V?
Here are the items that are included inside the box of Lumina V:
Floorstanding loudspeaker1 Manual 2 Jumpers2 Grilles 2 Fabric dust guards4 Spikes 4 Under spikes 4 Spikes locks
What's in the Box of KLH Kendall?
Here are the items that come with the Kendall:
Floorstanding loudspeakerGrilleFoam port4 Rubber feet4 Spike feet (with nuts)4 Protective discsManual
 High Frequency Response |
24k Hz
vs
23k Hz
|
Generates higher frequency |
 Sensitivity |
96 dB
vs
90 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
 Low Frequency Response |
25 Hz
vs
38 Hz
|
Generates deeper bass |
 Height |
1021mm
vs
1049mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
805cm2 (212x380mm)
vs
1044cm2 (280x373mm)
|
Takes less floor space |
 Price per pair* |
1500USD
vs
2799USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Sonus Faber Lumina V |
KLH Kendall |
| Brand |
Sonus Faber |
KLH |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
50-300 watts |
up to 250 watts |
| Sensitivity |
90 dB |
96 dB |
| Impedance |
4 ohms |
8 ohms |
| Frequency Response |
38-24k Hz |
25-23k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
paper cone |
Woven Kevlar |
| Woofer Surround Material |
n/a |
Butyl Rubber |
| Tweeter Size |
1.15" |
1" |
| Tweeter Type |
high definition DAD |
n/a |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
6" |
5.25" |
| Crossover Frequency |
260 and 2600 Hz |
n/a |
| Firing Direction |
bottom |
n/a |
Physical Specs |
|
|
| Height |
1049.0mm (41.3") |
1021.0mm (40.2") |
| Width |
280.0mm (11") |
212.0mm (8.3") |
| Depth |
373.0mm (14.7") |
380.0mm (15") |
| Weight |
22.50kg (49.5lbs) |
22.14kg (48.7lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
real multilayer wood |
MDF/Wood Veneer |
| Available Colors |
Black, Wenge, Walnut |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
|
10 Years |
| Labor Warranty |
|
10 Years |