In this review, we will be comparing Lumina III and Ultra Tower, two Passive Floor-standing speakers from Sonus Faber and SVS. Let's have a brief look at the main features
of Sonus Lumina III and SVS Ultra Tower first before getting into our more
detailed comparison.
What size room are the Sonus Lumina III and SVS Ultra Tower speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Sonus Lumina III and SVS Ultra Tower compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Lumina III and Ultra Tower are 3-way speakers.
| Driver |
Sonus Lumina III |
SVS Ultra Tower |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1.15-inch
|
1.0-inch
|
|
Midrange
|
1 x 6-inch |
2 x 6.5-inch |
|
Woofer
|
2 x 6-inch
|
2 x 8.0-inch
|
Lumina III features a 1.15" high definition DAD Tweeter , a 6" Midrange and 2 x 6" paper cone Woofer with a Crossover frequency at 350 and 3500 Hz. On the other hand, the Ultra Tower features a 1.0" aluminum Dome Tweeter , a 6.5" Midrange and 2 x 8.0" Polypropylene Woofer with a Crossover frequency at 160HZ and 2000Hz.
Frequency Response
Lumina III has a frequency range of 40-24k Hz whereas Ultra Tower has a frequency range of 28-32k Hz. With a minimum frequency of 28Hz, the Ultra Tower can go significantly deeper on the low side and provide stronger bass compared to the Lumina III's min frequency of 40Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Lumina III is a 4 ohms speaker compared to the Ultra Tower which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Lumina III can provide this impedance level.
These two speakers also have different sensitivity levels. Lumina III sensitivity is rated at 89 dB and the Ultra Tower's is rated at 88 dB. This 1 dB difference makes the Sonus Lumina III a more sensitive speaker compared to SVS Ultra Tower, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Lumina III can handle a max power of 300 watts RMS from the amp the whereas Lumina III has a max power handling value of 250 watts RMS , 50 watts less than the Ultra Tower.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Lumina III and Ultra Tower features dual binding post speaker terminals for bi-amping or bi-wiring.
SVS Ultra Tower's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus Lumina III's and SVS Ultra Tower's external dimensions. Sonus Lumina III has external dimensions of 989.0 x 228.0 x 278.0mm ( 38.9 x 9 x 10.9inch) whereas SVS Ultra Tower has external dimensions of 1159.0 x 355.0 x 445.0mm ( 45-5/8 x 13-15/16 x 17-1/2inch) .
SVS Ultra Tower is clearly the larger of the two speakers. Its body is 127mm wider, 170mm taller and 167mm deeper than Sonus Lumina III.
Below you can see the front view size comparison of Sonus Lumina III and SVS Ultra Tower in scale.
Comparison image of Sonus Lumina III and SVS Ultra Tower Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sonus Lumina III is approximately 633.8cm2 / 98.2inch2 and base area of the SVS Ultra Tower is approximately 1579.8cm2 / 244.9inch2. The Lumina III requires 60% less surface area than the Ultra Tower which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Sonus Lumina III weighs 15.90kg / 35lbs and the SVS Ultra Tower weighs 34.27kg / 75.4lbs. This makes the Ultra Tower 116% heavier than the Lumina III.
Here is a comparison of how Lumina III and Ultra Tower's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Sonus Lumina III?
Here are the items that are included inside the box of Lumina III:
Floorstanding loudspeaker1 Manual 2 Jumpers2 Grilles 2 Fabric dust guards4 Spikes 4 Under spikes 4 Spikes locks
What's in the Box of SVS Ultra Tower?
Here are the items that come with the Ultra Tower:
Floorstanding loudspeakerCloth grille2 Metal grillesFoam port plug4 Elastomer isolation feet (pre-installed)4 Spike feet4 Nuts4 Protective discs2 Terminal jumpers (pre-installed)Owners ManualSVS brochureOnline Product Registration Card
 Sensitivity |
89 dB
vs
88 dB
|
Play louder with same amount of amplification power |
 Height |
989mm
vs
1159mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
633cm2 (228x278mm)
vs
1579cm2 (355x445mm)
|
Takes less floor space |
 Price per pair* |
2199USD
vs
2600USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
300 watts
vs
250 watts
|
Handle more power from your amplifier |
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
 Woofer Size |
8.0 inches
vs
6 inches
|
Larger woofer |
| Low Frequency Response |
28 Hz
vs
40 Hz
|
Generates deeper bass |
 High Frequency Response |
32k Hz
vs
24k Hz
|
Generates higher frequency |
| General |
Sonus Faber Lumina III |
SVS Ultra Tower |
| Brand |
Sonus Faber |
SVS |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
50-250 watts |
20-300 watts |
| Sensitivity |
89 dB |
88 dB |
| Impedance |
4 ohms |
8 ohms |
| Frequency Response |
40-24k Hz |
28-32k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6" |
8.0" |
| Woofer Composition |
paper cone |
Polypropylene |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
1.15" |
1.0" |
| Tweeter Type |
high definition DAD |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
6" |
6.5" |
| Crossover Frequency |
350 and 3500 Hz |
160HZ and 2000Hz |
| Firing Direction |
bottom |
n/a |
Physical Specs |
|
|
| Height |
989.0mm (38.9") |
1159.0mm (45.6") |
| Width |
228.0mm (9") |
355.0mm (14") |
| Depth |
278.0mm (10.9") |
445.0mm (17.5") |
| Weight |
15.90kg (35lbs) |
34.27kg (75.4lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
real multilayer wood |
MDF/Oak veneer |
| Available Colors |
Black, Wenge, Walnut |
Black Oak,Piano Gloss Black,Piano Gloss White |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
|
5 Years |
| Labor Warranty |
|
5 Years |