In this review, we will be comparing Ultra Tower and R7, two Passive Floor-standing speakers from SVS and KEF.
Let's have a brief look at the main features
of SVS Ultra Tower and KEF R7 first before getting into our more
detailed comparison.
SVS Ultra Tower Key Specs
- 3-way Design
- 1.0" Dome Tweeter
- 6.5" Midrange
- 2 x 8.0" Polypropylene Woofer
- 28-32k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 8ohms
- Power Range:20-300watts
- Weight:34.27kg
- Dimensions (H x W x D): 1159.0" x 13-15/16" x 17-1/2"( 1159.0 x 355.0 x 445.0mm )
KEF R7 Key Specs
- 3-way Design
- 1" Dome Tweeter
- 5" Midrange
- 2 x 6.5" Hybrid Aluminum Woofer
- 5" Midrange
- 48-28k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 8ohms
- Power Range:15-250watts
- Weight:31.40kg
- Dimensions (H x W x D): 1113.0" x 8" x 15-5/16"( 1113.0 x 200.0 x 389.0mm )
What size room are the SVS Ultra Tower and KEF R7 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
SVS Ultra Tower |
KEF R7 |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the SVS Ultra Tower and KEF R7 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Ultra Tower and R7 are 3-way speakers.
| Driver |
SVS Ultra Tower |
KEF R7 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1.0-inch
|
1-inch
|
|
Midrange
|
2 x 6.5-inch |
1 x 5-inch |
|
Woofer
|
2 x 8.0-inch
|
2 x 6.5-inch
|
Ultra Tower features a 1.0" aluminum Dome Tweeter , a 6.5" Midrange and 2 x 8.0" Polypropylene Woofer with a Crossover frequency at 160HZ and 2000Hz. On the other hand, the R7 features a 1" aluminum Dome Tweeter , a 5" Midrange and 2 x 6.5" Hybrid Aluminum Woofer with a Crossover frequency at 400Hz and 2900Hz.
Frequency Response
Ultra Tower has a frequency range of 28-32k Hz whereas R7 has a frequency range of 48-28k Hz. With a minimum frequency of 28Hz, the Ultra Tower can go significantly deeper on the low side and provide stronger bass compared to the R7's min frequency of 48Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Ultra Tower and R7 have the same Impedance of 8 ohms and their sensitivity is also same at 88 dB.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Ultra Tower can handle a max power of 300 watts RMS from the amp the whereas R7 has a max power handling value of 250 watts RMS, 50 watts less than the Ultra Tower.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Ultra Tower and R7 features dual binding post speaker terminals for bi-amping or bi-wiring.
SVS Ultra Tower's Binding post terminals allows Bi-amping or bi-wiring
KEF R7's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare SVS Ultra Tower's and KEF R7's external dimensions. SVS Ultra Tower has external dimensions of 1159.0 x 355.0 x 445.0mm ( 45-5/8 x 13-15/16 x 17-1/2inch) whereas KEF R7 has external dimensions of 1113.0 x 200.0 x 389.0mm ( 43-13/16 x 8 x 15-5/16inch) .
SVS Ultra Tower is clearly the larger of the two speakers. Its body is 155mm wider, 46mm taller and 56mm deeper than KEF R7.
Below you can see the front view size comparison of SVS Ultra Tower and KEF R7 in scale.
Comparison image of SVS Ultra Tower and KEF R7 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the SVS Ultra Tower is approximately 1579.8cm2 / 244.9inch2 and base area of the KEF R7 is approximately 778.0cm2 / 120.6inch2. The Ultra Tower requires 103% more surface area than the R7 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The SVS Ultra Tower weighs 34.27kg / 75.4lbs and the KEF R7 weighs 31.40kg / 69.1lbs. This makes the Ultra Tower 9% heavier than the R7.
Here is a comparison of how Ultra Tower and R7's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of SVS Ultra Tower?
Here are the items that are included inside the box of Ultra Tower:
Floorstanding loudspeakerCloth grille2 Metal grillesFoam port plug4 Elastomer isolation feet (pre-installed)4 Spike feet4 Nuts4 Protective discs2 Terminal jumpers (pre-installed)Owners ManualSVS brochureOnline Product Registration Card
What's in the Box of KEF R7?
Here are the items that come with the R7:
Floorstanding loudspeakerGrille2 Foam port plugs4 Outrigger feet4 Spikes4 Protective discs4 Screws4 WashersWrenchHex-keyUser ManualWarranty Information
 Max Input Power |
300 watts
vs
250 watts
|
Handle more power from your amplifier |
 Woofer Size |
8.0 inches
vs
6.5 inches
|
Larger woofer |
|
Low Frequency Response |
28 Hz
vs
48 Hz
|
Generates deeper bass |
 High Frequency Response |
32k Hz
vs
28k Hz
|
Generates higher frequency |
 Price per pair* |
2600USD
vs
4500USD
|
costs less (*prices may change depending on the seller, location and time) |
 Height |
1113mm
vs
1159mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
778cm2
vs
1579cm2
|
Takes less floor space |
| General |
SVS Ultra Tower |
KEF R7 |
| Brand |
SVS |
KEF |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
20-300 watts |
15-250 watts |
| Sensitivity |
88 dB |
88 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
n/a |
3.2 ohms |
| Frequency Response |
28-32k Hz |
48-28k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
8.0" |
6.5" |
| Woofer Composition |
Polypropylene |
Hybrid Aluminum |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1.0" |
1" |
| Tweeter Type |
Dome |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
6.5" |
5" |
| Crossover Frequency |
160HZ and 2000Hz |
400Hz and 2900Hz |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
1159.0mm (45.6") |
1113.0mm (43.8") |
| Width |
355.0mm (14") |
200.0mm (7.9") |
| Depth |
445.0mm (17.5") |
389.0mm (15.3") |
| Weight |
34.27kg (75.4lbs) |
31.40kg (69.1lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Oak veneer |
MDF/Lacquer |
| Available Colors |
Black Oak,Piano Gloss Black,Piano Gloss White |
Black Gloss, White Gloss, Walnut |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |