SpeakerDecision
  • SPEAKERS by TYPE
    • Passive Bookshelf Speakers
    • Passive Floor-standing Speakers
    • Passive Center Channel Speakers
    • Passive In-wall Speakers
    • All Passive Speakers
    • Powered Subwoofers
    • Powered Stereo Speakers
  • AMPLIFIERS
  • SMART FIND

Revel Performa3 F206 vs Monitor Audio Silver 500 7G Comparison

x
Speaker to replace
Change

Revel Performa3 F206

Passive Floor-standing | 42Hz- 20kHz

Revel Performa3 F206
CHECK PRICE
Change
    
Monitor Audio Silver 500 7G

Passive Floor-standing | 27-35k Hz

Monitor Audio Silver 500 7G
CHECK PRICE
Revel Performa3 F206 Revel Performa3 F206
See at AMAZON
Monitor Audio Silver 500 7G Monitor Audio Silver...
See at AMAZON
Revel Performa3 F206
See at AMAZON
Monitor Audio Silver...
See at AMAZON
Revel Performa3 F206 vs Monitor Audio Silver 500 7G Speaker Comparison

In this review, we will be comparing Performa3 F206 and Silver 500 7G, two Passive Floor-standing speakers from Revel and Monitor Audio.

Let's have a brief look at the main features of Revel Performa3 F206 and Monitor Audio Silver 500 7G first before getting into our more detailed comparison.

Revel Performa3 F206 Key Specs

  • 3-way Design
  • 1" Hard-Dome with Acoustic Lens Waveguide Tweeter
  • 5.25" Midrange
  • 2 x 6.5" Aluminum Woofer
  • 42Hz- 20kHz Frequency Response
  • 88 dB Sensitivity
  • Impedance: 8ohms
  • Power Range:50-200watts
  • Weight:26.41kg
  • Dimensions (H x W x D): 1058.0" x 10" x 13-7/8"( 1058.0 x 254.0 x 353.0mm )

Monitor Audio Silver 500 7G Key Specs

  • 3-way Design
  • 1" gold dome C-CAM with Uniform Dispersion (UD) Waveguide II Tweeter
  • 3" Midrange
  • 2 x 8" C-CAM RST II Woofer
  • 3" Midrange
  • 27-35k Hz Frequency Response
  • 90.5 dB Sensitivity
  • Impedance: 8ohms
  • Power Range:80-250watts
  • Weight:22.53kg
  • Dimensions (H x W x D): 1085.0" x 12-11/16" x 15-7/16"( 1085.0 x 323.0 x 393.0mm )

What size room are the Revel Performa3 F206 and Monitor Audio Silver 500 7G speakers good for?

The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:

Listening Environment* Revel Performa3 F206 Monitor Audio Silver 500 7G
Near-field Bad Bad
Small Room Poor Poor
Mid-size Room Good Average
Large Room Good Good
Very Large Room Poor Average

(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2. Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)

In the following sections, we will get into more detail in order to better understand how the Revel Performa3 F206 and Monitor Audio Silver 500 7G compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.


**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.


Drivers

Both Performa3 F206 and Silver 500 7G are 3-way speakers.

Driver Revel Performa3 F206 Monitor Audio Silver 500 7G
Driver Setup 3-way 3-way
Tweeter 1-inch 1-inch
Midrange 1 x 5.25-inch 1 x 3-inch
Woofer 2 x 6.5-inch 2 x 8-inch

Performa3 F206 features a 1" Aluminum Hard-Dome with Acoustic Lens Waveguide Tweeter , a 5.25" Midrange and 2 x 6.5" Aluminum Woofer with a Crossover frequency at 275Hz and 2150Hz. On the other hand, the Silver 500 7G features a 1" gold dome C-CAM with Uniform Dispersion (UD) Waveguide II Tweeter , a 3" Midrange and 2 x 8" C-CAM RST II Woofer .

Frequency Response

Performa3 F206 has a frequency range of 42Hz- 20kHz whereas Silver 500 7G has a frequency range of 27-35k Hz. With a minimum frequency of 27Hz, the Silver 500 7G can go significantly deeper on the low side and provide stronger bass compared to the Performa3 F206's min frequency of 42Hz.

Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.

Low Frequency

Floor-standing Speakers

Performa3 F206
Silver 500 7G
Min
Average
Max
High Frequency

Floor-standing Speakers

Revel Performa3 F206
Monitor Audio Silver 500 7G
Min
Average
Max

None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.

Impedance and Sensitivity

Performa3 F206 and Silver 500 7G have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Performa3 F206 sensitivity is rated at 88 dB and the Silver 500 7G's is at 90.5 dB. This 3 dB difference makes the Monitor Audio Silver 500 7G a more sensitive speaker compared to Revel Performa3 F206, hence will play louder with the same amount of watts.

Sensitivity

Floor-standing Speakers

Performa3 F206
Silver 500 7G
Min
Average
Max

Power Range

Power range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.

Performa3 F206 can handle a max power of 250 watts RMS from the amp the whereas Performa3 F206 has a max power handling value of 200 watts RMS , 50 watts less than the Silver 500 7G.

Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters such as Impedance, sensitivity and system efficiencies.

Input Type and Bi-Amping / Bi-Wiring

Silver 500 7G features Binding post posts which make bi-amping or bi-wiring possible. Performa3 F206 has a Binding post which doesn't feature bi-amping/bi-wiring.

Revel Performa3 F206 Terminals
Revel Performa3 F206's Binding post terminals

Cabinet Type and Port Position

Both Performa3 F206 and Silver 500 7G have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.

If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.

Physical Specs

Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Revel Performa3 F206's and Monitor Audio Silver 500 7G's external dimensions. Revel Performa3 F206 has external dimensions of 1058.0 x 254.0 x 353.0mm ( 41-5/8 x 10 x 13-7/8inch) whereas Monitor Audio Silver 500 7G has external dimensions of 1085.0 x 323.0 x 393.0mm ( 42-11/16 x 12-11/16 x 15-7/16inch) .

Monitor Audio Silver 500 7G is clearly the larger of the two speakers. Its body is 69mm wider, 27mm taller and 40mm deeper than Revel Performa3 F206.

Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited. The base surface area of the Revel Performa3 F206 is approximately 896.6cm2 / 139.0inch2 and base area of the Monitor Audio Silver 500 7G is approximately 1269.4cm2 / 196.8inch2. The Performa3 F206 requires 29% less surface area than the Silver 500 7G which gives it a small advantage on placement in tight spaces.

Weight Comparison

The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Revel Performa3 F206 weighs 26.41kg / 58.1lbs and the Monitor Audio Silver 500 7G weighs 22.53kg / 49.6lbs. This makes the Performa3 F206 17% heavier than the Silver 500 7G.

Here is a comparison of how Performa3 F206 and Silver 500 7G's weights compare with the average, max and min weights in Passive Floor-standing class.

Weight
All Floor-standing Speakers
Revel Performa3 F206
Monitor Audio Silver 500 7G
Min
Average
Max

What's in the Box of Revel Performa3 F206?

Here are the items that are included inside the box of Performa3 F206:
  • Floorstanding loudspeaker
  • Grille
  • 4 Spike feet
  • 4 Locking rings
  • 4 Washers
  • Foam port plug
  • Owners Manual
  • What's in the Box of Monitor Audio Silver 500 7G?

    Here are the items that come with the Silver 500 7G:
  • Floorstanding loudspeaker
  • Grille
  • 4 Outrigger feet
  • 4 Rubber feet (pre-installed on outrigger feet)
  • 4 Spikes
  • 4 Bolts
  • 4 Machine screws
  • 2 Foam port plugs
  • 2 Hex-keys
  • Owners Manual
  • Important Safety Instructions

  • Reasons to choose Revel Performa3 F206 over Monitor Audio Silver 500 7G
    Height 1058mm vs 1085mm Easier to fit in smaller spaces
    Base Surface Area 896cm2 vs 1269cm2 Takes less floor space

    Reasons to choose Monitor Audio Silver 500 7G over Revel Performa3 F206

    Max Input Power 250 watts vs 200 watts Handle more power from your amplifier
    Sensitivity 91 dB vs 88 dB Play louder with same amount of amplification power
    Woofer Size 8 inches vs 6.5 inches Larger woofer
    Low Frequency Response 27 Hz vs 42 Hz Generates deeper bass
    High Frequency Response 35k Hz vs 20k Hz Generates higher frequency
    Bi-Amping and Bi-Wiring Yes vs No Allows bi-amping and bi-wiring connections
    Price per pair* 3200USD vs 3850USD costs less (*prices may change depending on the seller, location and time)
    Revel Performa3 F206 vs Monitor Audio Silver 500 7G Specs Table
    Detailed comparison of specifications
    General Revel Performa3 F206 Monitor Audio Silver 500 7G
    Brand Revel Monitor Audio
    Speaker Type Floor-standing speaker Floor-standing speaker
    Power Range 50-200 watts 80-250 watts
    Sensitivity 88 dB 90.5 dB
    Impedance 8 ohms 8 ohms
    Frequency Response 42Hz- 20kHz 27-35k Hz
    Drivers
    Woofer Quantity 2 2
    Woofer Size 6.5" 8"
    Woofer Composition Aluminum C-CAM RST II
    Woofer Surround Material Rubber Rubber
    Tweeter Size 1" 1"
    Tweeter Type Hard-Dome with Acoustic Lens Waveguide gold dome C-CAM with Uniform Dispersion (UD) Waveguide II
    Aimable Tweeter No No
    Midrange Driver 5.25" 3"
    Crossover Frequency 275Hz and 2150Hz n/a
    Firing Direction rear rear
    Physical Specs
    Height 1058.0mm (41.7") 1085.0mm (42.7")
    Width 254.0mm (10") 323.0mm (12.7")
    Depth 353.0mm (13.9") 393.0mm (15.5")
    Weight 26.41kg (58.1lbs) 22.53kg (49.6lbs)
    Enclosure Bass Reflex Bass Reflex
    Finish Wood/Lacquer MDF/Wood veneer
    Available Colors Gloss Black Oak
    Grille Yes Yes
    Moisture Resistancy No No
    Connections
    Biamp Inputs No Yes
    Other
    Parts Warranty 5 Years 5 Years
    Labor Warranty 5 Years 5 Years

    Most Popular Speakers
    Klipsch Reference R-51M
    Klipsch R-51M
    2-way | 93 dB | 8 ohms
    Wharfedale Elysian 2
    Wharfedale Elysian 2
    3-way | 89 dB | 4 ohms
    ELAC Debut 2.0 B6.2
    ELAC Debut 2.0 B6.2
    2-way | 87 dB | 6 ohms
    Bowers & Wilkins 606 S2 Anniversary Edition
    B&W 606 S2
    2-way | 88 dB | 8 ohms
    KEF Q150
    KEF Q150
    2-way | 86 dB | 8 ohms
    Klipsch Reference Premiere RP-500M
    Klipsch RP-500M
    2-way | 93 dB | 8 ohms
    Wharfedale EVO4.1
    Wharfedale EVO4.1
    2-way | 87 dB | 8 ohms
    Bowers & Wilkins 606
    B&W 606
    2-way | 88 dB | 8 ohms
    Copyright © 2025 by SpeakerDecision
    About Privacy Contact US Camera Decision

    Report a Correction