In this review, we will be comparing F35 and Imagine X2T, two Passive Floor-standing speakers from Revel and PSB. Let's have a brief look at the main features
of Revel Concerta2 F35 and PSB Imagine X2T first before getting into our more
detailed comparison.
What size room are the Revel Concerta2 F35 and PSB Imagine X2T speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Revel Concerta2 F35 and PSB Imagine X2T compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both F35 and Imagine X2T are 3-way speakers.
| Driver |
Revel Concerta2 F35 |
PSB Imagine X2T |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 5.25-inch |
1 x 5.25-inch |
|
Woofer
|
2 x 5.25-inch
|
2 x 6.2-inch
|
F35 features a 1" aluminum dome with with proprietary acoustic lens and waveguide Tweeter , a 5.25" Midrange and 2 x 5.25" Anodized aluminum Woofer . On the other hand, the Imagine X2T features a 1" titanium with neodymium magnets Dome Tweeter , a 5.25" Midrange and 2 x 6.2" Clay/Ceramic/Poly Woofer with a Crossover frequency at 500Hz and 2200Hz.
Frequency Response
F35 has a frequency range of 55- Hz whereas Imagine X2T has a frequency range of 30-23k Hz. With a minimum frequency of 30Hz, the Imagine X2T can go significantly deeper on the low side and provide stronger bass compared to the F35's min frequency of 55Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
F35 is a 6 ohms speaker compared to the Imagine X2T which has a nominal impedance of 8 ohms.
On the other hand, they have the same sensitivity of 90 dBdB.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
F35 can handle a max power of 200 watts RMS from the amp the whereas F35 has a max power handling value of 180 watts RMS , 20 watts less than the Imagine X2T.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Imagine X2T features 5-Way post posts which make bi-amping or bi-wiring possible. F35 has a 5-Way post which doesn't feature bi-amping/bi-wiring.
PSB Imagine X2T's 5-Way post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
F35 has a rear firing port whereas Imagine X2T has a front firing ports. PSB Imagine X2T's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Revel Concerta2 F35 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Revel Concerta2 F35's and PSB Imagine X2T's external dimensions. Revel Concerta2 F35 has external dimensions of 1026.0 x 216.0 x 313.0mm ( 40-3/8 x 8-1/2 x 12-5/16inch) whereas PSB Imagine X2T has external dimensions of 1020.0 x 229.0 x 426.0mm ( 40-1/8 x 9 x 16-3/4inch) .
Revel Concerta2 F35 is 13mm narrower and 113mm less deeper than PSB Imagine X2T but it is also 6mm taller.
Below you can see the front view size comparison of Revel Concerta2 F35 and PSB Imagine X2T in scale.
Comparison image of Revel Concerta2 F35 and PSB Imagine X2T Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Revel Concerta2 F35 is approximately 676.1cm2 / 104.8inch2 and base area of the PSB Imagine X2T is approximately 975.5cm2 / 151.2inch2. The F35 requires 31% less surface area than the Imagine X2T which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Revel Concerta2 F35 weighs 18.64kg / 41lbs and the PSB Imagine X2T weighs 23.60kg / 51.9lbs. This makes the Imagine X2T 27% heavier than the F35.
Here is a comparison of how F35 and Imagine X2T's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Revel Concerta2 F35?
Here are the items that are included inside the box of F35:
Floorstanding loudspeakerGrille4 Spike feetOwners Manual
What's in the Box of PSB Imagine X2T?
Here are the items that come with the Imagine X2T:
Floor-standing speakerGrille4 Rubber feet4 Spiked FeetWrenchQuick Start GuideWarranty Card
 Base Surface Area |
676cm2 (216x313mm)
vs
975cm2 (229x426mm)
|
Takes less floor space |
 Max Input Power |
200 watts
vs
180 watts
|
Handle more power from your amplifier |
 Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
 Woofer Size |
6.2 inches
vs
5.25 inches
|
Larger woofer |
| Low Frequency Response |
30 Hz
vs
55 Hz
|
Generates deeper bass |
 High Frequency Response |
23k Hz
vs
0k Hz
|
Generates higher frequency |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 Height |
1020mm
vs
1026mm
|
Easier to fit in smaller spaces |
 Price per pair* |
1500USD
vs
1760USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Revel Concerta2 F35 |
PSB Imagine X2T |
| Brand |
Revel |
PSB |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
30-180 watts |
20-200 watts |
| Sensitivity |
90 dB |
90 dB |
| Impedance |
6 ohms |
8 ohms |
| Frequency Response |
55- Hz |
30-23k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
5.25" |
6.2" |
| Woofer Composition |
Anodized aluminum |
Clay/Ceramic/Poly |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
dome with with proprietary acoustic lens and waveguide |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
5.25" |
5.25" |
| Crossover Frequency |
n/a |
500Hz and 2200Hz |
| Firing Direction |
rear |
front |
Physical Specs |
|
|
| Height |
1026.0mm (40.4") |
1020.0mm (40.2") |
| Width |
216.0mm (8.5") |
229.0mm (9") |
| Depth |
313.0mm (12.3") |
426.0mm (16.8") |
| Weight |
18.64kg (41lbs) |
23.60kg (51.9lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
Wood/Lacquer |
MDF/Wood-grain |
| Available Colors |
Gloss White |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |