In this review, we will be comparing Q Acoustics 5040 and Concord, two Passive Floor-standing speakers from Q Acoustics and KLH. Let's have a brief look at the main features
of Q Acoustics 5040 and KLH Concord first before getting into our more
detailed comparison.
In the following sections, we will get into more detail in order to better understand how the Q Acoustics 5040 and KLH Concord compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Q Acoustics 5040 and Concord are 2-way speakers.
| Driver |
Q Acoustics 5040 |
KLH Concord |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 5-inch
|
2 x 6.5-inch
|
Q Acoustics 5040 features a 1" Soft-dome Tweeter and 2 x 5" Continuous Curved Cone Woofer with a Crossover frequency at 2500 Hz. On the other hand, the Concord features a 1" anodized aluminum Tweeter and 2 x 6.5" Kevlar Woofer .
Frequency Response
Q Acoustics 5040 has a frequency range of 39-30k Hz whereas Concord has a frequency range of 28-23k Hz. With a minimum frequency of 28Hz, the Concord can go significantly deeper on the low side and provide stronger bass compared to the Q Acoustics 5040's min frequency of 39Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Q Acoustics 5040 is a 6 ohms speaker compared to the Concord which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. Q Acoustics 5040 sensitivity is rated at 91.5 dB and the Concord's is rated at 94 dB. This 2 dB difference makes the KLH Concord a more sensitive speaker compared to Q Acoustics 5040, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Q Acoustics 5040 can handle a max power of 150 watts RMS from the amp the whereas Concord has a max power handling value of watts RMS, 150 watts less than the Q Acoustics 5040.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Q Acoustics 5040 features 5-Way post type posts and Concord has a 5-Way post type posts. None of these speakers feature bi-amping/bi-wiring.
Q Acoustics 5040's Binding post terminals
KLH Concord's 5-Way post terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Q Acoustics 5040's and KLH Concord's external dimensions. Q Acoustics 5040 has external dimensions of 969.0 x 362.0 x 293.0mm ( 38-1/8inch x 14-1/4inch x 11-1/2inch ) whereas KLH Concord has external dimensions of 1026.0 x 212.0 x 380.0mm ( 40-3/8 x 8-5/16 x 14-15/16inch) .
Q Acoustics 5040 is 57mm shorter and 87mm less deeper than KLH Concord but it is also 150mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Q Acoustics 5040 is approximately 1060.7cm2 / 164.4inch2 and base area of the KLH Concord is approximately 805.6cm2 / 124.9inch2. The Q Acoustics 5040 requires 32% more surface area than the Concord which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Q Acoustics 5040 weighs 18.05kg / 39.7lbs and the KLH Concord weighs 20.45kg / 45lbs. This makes the Concord 13% heavier than the Q Acoustics 5040.
Here is a comparison of how Q Acoustics 5040 and Concord's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Q Acoustics 5040?
Here are the items that are included inside the box of Q Acoustics 5040:
1x 5040 loudspeaker1x Owners manual 2x Foam bung4x Spike feet 4x Spike cover 4x M5 screw 2x Rear stabiliser
What's in the Box of KLH Concord?
Here are the items that come with the Concord:
Floorstanding loudspeakerGrille4 Spike feet (w/ locking nut attached)4 Protective discs4 Rubber feetPort plugManualATTENTION! note
 High Frequency Response |
30k Hz
vs
23k Hz
|
Generates higher frequency |
 Height |
969mm
vs
1026mm
|
Easier to fit in smaller spaces |
 Sensitivity |
94 dB
vs
92 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
 Woofer Size |
6.5 inches
vs
5 inches
|
Larger woofer |
| Low Frequency Response |
28 Hz
vs
39 Hz
|
Generates deeper bass |
 Base Surface Area |
805cm2 (212x380mm)
vs
1060cm2 (362x293mm)
|
Takes less floor space |
 Price per pair* |
1000USD
vs
1498USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Q Acoustics 5040 |
KLH Concord |
| Brand |
Q Acoustics |
KLH |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
25-150 watts |
up to 225 watts |
| Sensitivity |
91.5 dB |
94 dB |
| Impedance |
6 ohms |
8 ohms |
| Impedance |
3.0 ohms |
n/a |
| Frequency Response |
39-30k Hz |
28-23k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
5" |
6.5" |
| Woofer Composition |
Continuous Curved Cone |
Kevlar |
| Woofer Surround Material |
Rubber |
Butyl Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Soft-dome |
n/a |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2500 Hz |
n/a |
| Firing Direction |
rear |
n/a |
Physical Specs |
|
|
| Height |
969.0mm (38.1") |
1026.0mm (40.4") |
| Width |
362.0mm (14.3") |
212.0mm (8.3") |
| Depth |
293.0mm (11.5") |
380.0mm (15") |
| Weight |
18.05kg (39.7lbs) |
20.45kg (45lbs) |
| Enclosure |
Bass Relfex |
Bass Reflex |
| Finish |
MDF |
MDF/Wood-grain vinyl |
| Available Colors |
Holme Oak,Satin Black,Satin White,Santos Rosewood |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 years |
10 Years |
| Labor Warranty |
5 years |
10 Years |