In this review, we will be comparing two different types of speakers by Q Acoustics. Q Acoustics 3050i is a Floor-standing speaker whereas the 3030i is a Bookshelf speaker.
Let's have a brief look at the main features
of Q Acoustics 3050i and Q Acoustics 3030i first before getting into our more
detailed comparison.
| Key Specs | Q Acoustics 3050i | Q Acoustics 3030i |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | 0.9" decoupled | 1" decoupled |
|---|
| Woofer | 2 x 6.5" Coated paper | 6.5" Coated paper |
|---|
| Frequency response | 44-30k Hz | 46-30k Hz |
|---|
| Sensitivity | 91 dB | 88 dB |
|---|
| Impedance | 6 ohms | 6 ohms |
|---|
| Power range | 50-165 watts | 25-75 watts |
|---|
| Weight | 17.82kg / 39.2lbs | 6.20kg / 13.6lbs |
|---|
| Dimensions (H x W x D) | 40.2" x 12.2" x 12.6"
1020 x 310 x 320 mm | 12.7" x 7.8" x 12.9"
325.0 x 200.0 x 329.0mm |
|---|
3050i and 3030i are members of Q Acoustics's 3000i series of speakers. Below you can find the loudspeakers from this series.
Q Acoustics 3000i Series
History
What size room are the Q Acoustics 3050i and Q Acoustics 3030i speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Q Acoustics 3050i |
Q Acoustics 3030i |
| Near-field |
Bad |
Good |
| Small Room |
Poor |
Good |
| Mid-size Room |
Good |
Average |
| Large Room |
Good |
Poor |
| Very Large Room |
Poor |
No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking
through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both 3050i and 3030i are 2-way speakers.
Q Acoustics 3050iQ Acoustics 3030i
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Q Acoustics 3050i |
Q Acoustics 3030i |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
0.9-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 6.5-inch
|
1 x 6.5-inch
|
3050i features a 0.9" decoupled Tweeter and 2 x 6.5" Coated paper Woofer with a Crossover frequency at 2500 Hz. On the other hand, the 3030i features a 1" decoupled Tweeter and 1 x 6.5" Coated paper Woofer with a Crossover frequency at 2400Hz.
Frequency Response
3050i has a frequency range of 44-30k Hz whereas 3030i has a frequency range of 46-30k Hz. With a minimum frequency of 44Hz, the 3050i can go slightly deeper then the 3030i's min frequency of 46Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
3050i and 3030i have the same Impedance of 6 ohms but where they differ is the sensitivity levels. 3050i sensitivity is rated at 91 dB and the 3030i's is at 88 dB. This 3 dB difference makes the Q Acoustics 3050i a more sensitive speaker compared to Q Acoustics 3030i, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
3050i can handle a max power of 175 watts RMS, whereas 3030i has a max power handling value of 75 watts RMS, 100 watts less than the 3050i.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier — change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
3050i features Binding post type posts and 3030i has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both 3050i and 3030i have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Q Acoustics 3050i's and Q Acoustics 3030i's external dimensions. Q Acoustics 3050i has external dimensions of 1020 x 310 x 320 mm (40.2 x 12.2 x 12.6 in) whereas Q Acoustics 3030i has external dimensions of 325.0 x 200.0 x 329.0mm (12.7 x 7.8 x 12.9inch).
Q Acoustics 3030i is 110mm narrower and 695mm shorter than Q Acoustics 3050i but it is also 9mm deeper.
Below you can see the front view size comparison of Q Acoustics 3050i and Q Acoustics 3030i in scale.
Comparison image of Q Acoustics 3050i and Q Acoustics 3030i Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Q Acoustics 3050i is approximately 992.0cm2 / 153.8inch2 and base area of the Q Acoustics 3030i is approximately 658.0cm2 / 102.0inch2. The 3050i requires 51% more surface area than the 3030i which gives it a small disadvantage on placement in tight spaces.
What's in the Box of Q Acoustics 3050i?
Here are the items that are included inside the box of 3050i:
- 1x 3050i loudspeaker
- 1x Owners manual
- 2x Foam bung
- 4x Spike feet
- 4x Spike cover
- 4x M5 screw
- 2x Rear stabiliser
What's in the Box of Q Acoustics 3030i?
Here are the items that come with the 3030i:
- 2 x 3030i bookshelf speakers
- 2 x Speaker Grilles
- 2 x Foam Bungs
- 1 x User Manual