In this review, we will be comparing 3020i and Bronze 2, two Passive Bookshelf speakers from Q Acoustics and Monitor Audio. Let's have a brief look at the main features
of Q Acoustics 3020i and Monitor Audio Bronze 2 first before getting into our more
detailed comparison.
Q Acoustics 3020i Key Specs
- 2-way Design
- 0.9" decoupled Tweeter
- 5" Coated paper Woofer
- 64-30k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 6ohms
- Power Range:25-75watts
- Weight:4.80kg
- Dimensions (H x W x D): 278.0" x 6.6" x 11.1"( 278.0 x 170.0 x 282.0mm )
Monitor Audio Bronze 2 Key Specs
- 2-way Design
- 1" Dome Tweeter
- 6.5" C-CAM Woofer
- 42-30k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 8ohms
- Power Range:30-100watts
- Weight:5.30kg
- Dimensions (H x W x D): 350.0" x 7.2" x 11.0"( 350.0 x 185.0 x 281.0mm )
What size room are the Q Acoustics 3020i and Monitor Audio Bronze 2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
Q Acoustics 3020i |
Monitor Audio Bronze 2 |
| Near-field |
Good |
Average |
| Small Room |
Good |
Good |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Poor |
| Very Large Room |
No way |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Q Acoustics 3020i and Monitor Audio Bronze 2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both 3020i and Bronze 2 are 2-way speakers.
| Driver |
Q Acoustics 3020i |
Monitor Audio Bronze 2 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
0.9-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5-inch
|
1 x 6.5-inch
|
3020i features a 0.9" decoupled Tweeter and 1 x 5" Coated paper Woofer with a Crossover frequency at 2400Hz and 2400Hz. On the other hand, the Bronze 2 features a 1" Dome Tweeter and 1 x 6.5" C-CAM Woofer with a Crossover frequency at 3100Hz.
Frequency Response
3020i has a frequency range of 64-30k Hz whereas Bronze 2 has a frequency range of 42-30k Hz. With a minimum frequency of 42Hz, the Bronze 2 can go slightly deeper then the 3020i's min frequency of 46Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
3020i is a 6 ohms speaker compared to the Bronze 2 which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. 3020i sensitivity is rated at 88 dB and the Bronze 2's is rated at 90 dB. This 2 dB difference makes the Monitor Audio Bronze 2 a more sensitive speaker compared to Q Acoustics 3020i, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
3020i can handle a max power of 100 watts RMS from the amp the whereas 3020i has a max power handling value of 75 watts RMS , 25 watts less than the Bronze 2.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Bronze 2 features Post posts which make bi-amping or bi-wiring possible. 3020i has a Post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
3020i has a rear firing port whereas Bronze 2 has a front firing ports. Monitor Audio Bronze 2's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Q Acoustics 3020i with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Q Acoustics 3020i's and Monitor Audio Bronze 2's external dimensions. Q Acoustics 3020i has external dimensions of 278.0 x 170.0 x 282.0mm ( 10.9 x 6.6 x 11.1inch) whereas Monitor Audio Bronze 2 has external dimensions of 350.0 x 185.0 x 281.0mm ( 13.7 x 7.2 x 11.0inch) .
Q Acoustics 3020i is 15mm narrower and 72mm shorter than Monitor Audio Bronze 2 but it is also 1mm deeper.
Below you can see the front view size comparison of Q Acoustics 3020i and Monitor Audio Bronze 2 in scale.
Comparison image of Q Acoustics 3020i and Monitor Audio Bronze 2 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Q Acoustics 3020i is approximately 479.4cm2 / 74.3inch2 and base area of the Monitor Audio Bronze 2 is approximately 519.9cm2 / 80.6inch2. The 3020i requires 8% less surface area than the Bronze 2 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Q Acoustics 3020i and Monitor Audio Bronze 2 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Q Acoustics 3020i weighs 4.80kg / 10.6lbs and the Monitor Audio Bronze 2 weighs 5.30kg / 11.7lbs. This makes the Bronze 2 10% heavier than the 3020i.
Here is a comparison of how 3020i and Bronze 2's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Q Acoustics 3020i?
Here are the items that are included inside the box of 3020i:
2 x 3020i bookshelf speakers 2 x Foam Bungs 2 x Speaker Grilles 1 x User Manual 1 x Handling Gloves 8 x Rubber Speaker Grips
What's in the Box of Monitor Audio Bronze 2?
Here are the items that come with the Bronze 2:
2 Bookshelf loudspeakers 2 Grilles 2 Foam port plugs Hex-key Owner's Manual Important Safety Instructions