In this review, we will be comparing 3020i and BW 607, two Passive Bookshelf speakers from Q Acoustics and Bowers Wilkins.
Let's have a brief look at the main features
of Q Acoustics 3020i and B&W 607 first before getting into our more
detailed comparison.
| Key Specs | Q Acoustics 3020i | B&W 607 |
|---|
| Brand | Q Acoustics
United Kingdom · founded 2006 | Bowers Wilkins
United Kingdom · founded 1966 |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | 0.9" decoupled | 1" Hard-Dome |
|---|
| Woofer | 5" Coated paper | 5" Continuum |
|---|
| Frequency response | 64-30k Hz | 52-28k Hz |
|---|
| Sensitivity | 88 dB | 84 dB |
|---|
| Impedance | 6 ohms | 8 ohms |
|---|
| Power range | 25-75 watts | 30-100 watts |
|---|
| Weight | 4.80kg / 10.6lbs | 4.70kg / 10.3lbs |
|---|
| Dimensions (H x W x D) | 10.9" x 6.6" x 11.1"
278.0 x 170.0 x 282.0mm | 11.8" x 6.4" x 8.1"
300.0 x 165.0 x 207.0mm |
|---|
What size room are the Q Acoustics 3020i and B&W 607 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Q Acoustics 3020i |
B&W 607 |
| Near-field |
Good |
Average |
| Small Room |
Good |
Good |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Poor |
| Very Large Room |
No way |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both 3020i and BW 607 are 2-way speakers.
Q Acoustics 3020iB&W 607
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Q Acoustics 3020i |
B&W 607 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
0.9-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5-inch
|
1 x 5-inch
|
3020i features a 0.9" decoupled Tweeter and 1 x 5" Coated paper Woofer with a Crossover frequency at 2400Hz. On the other hand, the BW 607 features a 1" Decoupled Carbon Hard-Dome Tweeter and 1 x 5" Continuum Woofer.
Frequency Response
3020i has a frequency range of 64-30k Hz whereas BW 607 has a frequency range of 52-28k Hz. With a minimum frequency of 52Hz, the BW 607 can go significantly deeper on the low side and provide stronger bass compared to the 3020i's min frequency of 64Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
3020i is a 6 ohms speaker compared to the BW 607 which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. 3020i sensitivity is rated at 88 dB and the BW 607's is rated at 84 dB. This 4 dB difference makes the Q Acoustics 3020i a more sensitive speaker compared to B&W 607, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
BW 607 can handle a max power of 100 watts RMS, whereas 3020i has a max power handling value of 75 watts RMS, 25 watts less than the BW 607.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
BW 607 features Post posts which make bi-amping or bi-wiring possible. 3020i has a Binding post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both 3020i and BW 607 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Q Acoustics 3020i's and B&W 607's external dimensions. Q Acoustics 3020i has external dimensions of 278.0 x 170.0 x 282.0mm (10.9 x 6.6 x 11.1inch) whereas B&W 607 has external dimensions of 300.0 x 165.0 x 207.0mm (11.8 x 6.4 x 8.1inch).
B&W 607 is 5mm narrower and 75mm less deeper than Q Acoustics 3020i but it is also 22mm taller.
Below you can see the front view size comparison of Q Acoustics 3020i and B&W 607 in scale.
Comparison image of Q Acoustics 3020i and B&W 607 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Q Acoustics 3020i is approximately 479.4cm2 / 74.3inch2 and base area of the B&W 607 is approximately 341.6cm2 / 52.9inch2. The 3020i requires 40% more surface area than the BW 607 which gives it a small disadvantage on placement in tight spaces.
Here is another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Q Acoustics 3020i and B&W 607 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Q Acoustics 3020i weighs 4.80kg / 10.6lbs and the B&W 607 weighs 4.70kg / 10.3lbs. This makes the 3020i 2% heavier than the BW 607.
Here is a comparison of how 3020i and BW 607's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Q Acoustics 3020i?
Here are the items that are included inside the box of 3020i:
- 2 x 3020i bookshelf speakers
- 2 x Foam Bungs
- 2 x Speaker Grilles
- 1 x User Manual
- 1 x Handling Gloves
- 8 x Rubber Speaker Grips
What's in the Box of B&W 607?
Here are the items that come with the BW 607:
- 2 Bookshelf loudspeakers
- 2 Grilles
- 2 Two-piece foam port plugs
- 8 Self-adhesive rubber feet
- 4 Jumper-straps
- Manual
- Bowers & Wilkins brochure
- Warranty Information
 Sensitivity |
88 dB
vs
84 dB
|
Play louder with same amount of amplification power |
 Minimum Impedance |
4 ohms
vs
3.0 ohms
|
Very low impedance levels puts more pressure on amplifier |
 High Frequency Response |
30k Hz
vs
28k Hz
|
Generates higher frequency |
 Height |
278mm
vs
300mm
|
Easier to fit in smaller spaces |
 Price per pair* |
399USD
vs
799USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
100 watts
vs
75 watts
|
Handle more power from your amplifier |
 Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
 Low Frequency Response |
52 Hz
vs
64 Hz
|
Generates deeper bass |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Base Surface Area |
341cm2
vs
479cm2
|
Takes less floor space |
| General |
Q Acoustics 3020i |
Bowers & Wilkins 607 |
| Brand |
Q Acoustics |
Bowers Wilkins |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
25-75 watts |
30-100 watts |
| Sensitivity |
88 dB |
84 dB |
| Impedance |
6 ohms |
8 ohms |
| Impedance |
4 ohms |
3.0 ohms |
| Frequency Response |
64-30k Hz |
52-28k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5" |
5" |
| Woofer Composition |
Coated paper |
Continuum |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
0.9" |
1" |
| Tweeter Type |
decoupled |
Hard-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2400Hz |
n/a |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
278.0mm (10.9") |
300.0mm (11.8") |
| Width |
170.0mm (6.7") |
165.0mm (6.5") |
| Depth |
282.0mm (11.1") |
207.0mm (8.1") |
| Weight |
4.80kg (10.6lbs) |
4.70kg (10.3lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF/Vinyl |
| Available Colors |
Walnut, Black, White, Grey |
Black, White, Oak |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
n/a |
24-26" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
4 Years |
5 Years |
| Labor Warranty |
4 Years |
5 Years |
These sit in different price classes - B&W 607 costs roughly 2x what Q Acoustics 3020i does. Expect it to lead on paper; the question is whether the gap is audible enough in your room to be worth it.
| Area | Better | Why |
|---|
| Bass | B | B&W 607 digs deeper - 52Hz against 64Hz. |
| Amplifier needs | A | Q Acoustics 3020i is more sensitive (88dB vs 84dB), so it goes louder on the same amplifier. |
| Amplifier match | B | B&W 607 is the easier load at 8 ohms. |
| Headroom | B | B&W 607 takes more power (100W vs 75W) - more in hand in a big room. |
| Size | depends | B&W 607 is easier to place; Q Acoustics 3020i is bigger, which usually goes with fuller bass. Your room decides. |
| Expandability | depends | B&W 607: bi-amping. Q Acoustics 3020i sits in a wider range (6 models), so a matched surround system is easier later. |
| Price | A | Q Acoustics 3020i is cheaper - $399 against $799, about 50% less; arguably a different class. |
A Q Acoustics 3020i B B&W 607
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: B&W 607 measures better, Q Acoustics 3020i costs about about 100% more% less. Whether that gap is worth the money is the call only you can make - and in a normal room it is often smaller than the numbers suggest. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 64Hz anyway, which makes the cheaper Q Acoustics 3020i much easier to justify. Match it to your room: we rate Q Acoustics 3020i the better fit for near-field listening; elsewhere the two are rated the same.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.