In this review, we will be comparing T50 and 603 S3, two Passive Floor-standing speakers from Polk Audio and Bowers Wilkins.
Let's have a brief look at the main features
of Polk Audio T50 and B&W 603 S3 first before getting into our more
detailed comparison.
| Key Specs | Polk Audio T50 | B&W 603 S3 |
|---|
| Brand | Polk Audio United States · founded 1972 | Bowers Wilkins United Kingdom · founded 1966 |
|---|
| Design | 2-way | 3-way |
|---|
| Tweeter | 1" Dome | 1" Decoupled Double Dome |
|---|
| Midrange | — | 6" |
|---|
| Woofer | 2 x 6.5" Bi-laminate paper | 2 x 6.5" Paper |
|---|
| Frequency response | 35-40k Hz | 46-28k Hz |
|---|
| Sensitivity | 89 dB | 90 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | 25-200 watts | 30-200 watts |
|---|
| Weight | 15.88kg / 34.9lbs | 27.50kg / 60.5lbs |
|---|
| Dimensions (H x W x D) | 40-3/8" x 9-1/4" x 12-1/2" 1026.0 x 235.0 x 318.0mm | 38.8" x 7.5" x 14.5" 985.0 x 190.0 x 368.0mm |
|---|
What size room are the Polk Audio T50 and B&W 603 S3 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Polk Audio T50 |
B&W 603 S3 |
| Near-field |
Poor |
Bad |
| Small Room |
Average |
Poor |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Good |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
One of the fundamental differences between these two speakers is that T50 is a 2-way design whereas the 603 S3 is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Polk Audio T50B&W 603 S3
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Polk Audio T50 |
B&W 603 S3 |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 6-inch |
|
Woofer
|
2 x 6.5-inch
|
2 x 6.5-inch
|
T50 features a 1" Terylene Dome Tweeter and 2 x 6.5" Bi-laminate paper Woofer with a Crossover frequency at 2700Hz. On the other hand, the 603 S3 features a 1" Titanium Decoupled Double Dome Tweeter, a 6" Midrange and 2 x 6.5" Paper Woofer.
Frequency Response
T50 has a frequency range of 35-40k Hz whereas 603 S3 has a frequency range of 46-28k Hz. With a minimum frequency of 35Hz, the T50 can go significantly deeper on the low side and provide stronger bass compared to the 603 S3's min frequency of 46Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
T50 and 603 S3 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. T50 sensitivity is rated at 89 dB and the 603 S3's is at 90 dB. This 1 dB difference makes the B&W 603 S3 a more sensitive speaker compared to Polk Audio T50, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Both handle the same maximum of 200 watts RMS, though T50 is rated 25-200 watts and 603 S3 30-200 watts.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
603 S3 features Binding post posts which make bi-amping or bi-wiring possible. T50 has a 5-way post which doesn't feature bi-amping/bi-wiring.
B&W 603 S3's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk Audio T50's and B&W 603 S3's external dimensions. Polk Audio T50 has external dimensions of 1026.0 x 235.0 x 318.0mm (40-3/8 x 9-1/4 x 12-1/2inch) whereas B&W 603 S3 has external dimensions of 985.0 x 190.0 x 368.0mm (38.8 x 7.5 x 14.5inch).
B&W 603 S3 is 45mm narrower and 41mm shorter than Polk Audio T50 but it is also 50mm deeper.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Near-identical footprints. B&W 603 S3 is 50mm deeper, so it stands that much further out from the wall. Polk Audio T50 is 41mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk Audio T50 is approximately 747.3cm2 / 115.8inch2 and base area of the B&W 603 S3 is approximately 699.2cm2 / 108.4inch2. The T50 requires 7% more surface area than the 603 S3 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk Audio T50 weighs 15.88kg / 34.9lbs and the B&W 603 S3 weighs 27.50kg / 60.5lbs. This makes the 603 S3 73% heavier than the T50.
Here is a comparison of how T50 and 603 S3's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of B&W 603 S3?
Here are the items that come with the 603 S3:
- Floorstanding loudspeaker
- Grille
- Plinith (base)
- 2 Jumper-straps (pre-installed)
- 4 Rubber feet
- 4 Spike feet
- 4 Hex-nuts
- 4 Screws
- 4 Washers
- 4 Lock-washers
- Two-piece foam port plug
- Hex-key
- Manual
- Bowers & Wilkins brochure
- Warranty Information
Minimum Impedance |
4 ohms
vs
3 ohms
|
Very low impedance levels puts more pressure on amplifier |
Low Frequency Response |
35 Hz
vs
46 Hz
|
Generates deeper bass |
High Frequency Response |
40k Hz
vs
28k Hz
|
Generates higher frequency |
Passive Radiator |
2 x 8-inch
vs
None
|
Increases the bass performance |
Price per pair* |
498USD
vs
2700USD
|
costs less (*prices may change depending on the seller, location and time) |
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
Sensitivity |
90 dB
vs
89 dB
|
Play louder with same amount of amplification power |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Height |
985mm
vs
1026mm
|
Easier to fit in smaller spaces |
Base Surface Area |
699cm2
vs
747cm2
|
Takes less floor space |
| General |
Polk Audio T50 |
Bowers & Wilkins 603 S3 |
| Brand |
Polk Audio |
Bowers Wilkins |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
25-200 watts |
30-200 watts |
| Sensitivity |
89 dB |
90 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
4 ohms |
3 ohms |
| Frequency Response |
35-40k Hz |
46-28k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
Bi-laminate paper |
Paper |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Dome |
Decoupled Double Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
6" |
| Crossover Frequency |
2700Hz |
n/a |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
1026.0mm (40.4") |
985.0mm (38.8") |
| Width |
235.0mm (9.3") |
190.0mm (7.5") |
| Depth |
318.0mm (12.5") |
368.0mm (14.5") |
| Weight |
15.88kg (34.9lbs) |
27.50kg (60.5lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF/Vinyl |
| Available Colors |
n/a |
Matte Black, Matte White, Oak, Red Cherry |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |
These sit in different price classes - B&W 603 S3 costs roughly 5.4x what Polk Audio T50 does. Expect it to lead on paper; the question is whether the gap is audible enough in your room to be worth it.
| Area | Better | Why |
|---|
| Bass | A | Polk Audio T50 digs deeper - 35Hz against 46Hz. |
| Amplifier needs | evenly matched | Similar sensitivity (89dB vs 90dB) - both want much the same power. |
| Headroom | evenly matched | Similar power handling (200W vs 200W). |
| Size | depends | Similar cabinet size - neither is easier to fit. |
| Cabinet | depends | Passive Radiator vs Ported. |
| Expandability | B | B&W 603 S3: bi-amping. |
| Price | A | Polk Audio T50 is cheaper - $498 against $2,700, about 82% less; arguably a different class. |
A Polk Audio T50 B B&W 603 S3
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Neither runs away with it - they trade advantages. Let the "depends" rows and your own room settle it. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 46Hz anyway, so judge these on the other rows instead. Match it to your room: we rate Polk Audio T50 the better fit for a small room, and B&W 603 S3 for a large room.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.