In this review, we will be comparing S20 and TSi200, two Passive Bookshelf speakers by Polk Audio Let's have a brief look at the main features
of Polk S20 and Polk TSi200 first before getting into our more
detailed comparison.
What size room are the Polk S20 and Polk TSi200 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk S20 and Polk TSi200 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both S20 and TSi200 are 2-way speakers.
| Driver |
Polk S20 |
Polk TSi200 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
2 x 5.25-inch
|
S20 features a 1" Terylene Soft-Dome Tweeter and 1 x 6.5" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz. On the other hand, the TSi200 features a 1" Dome Tweeter and 2 x 5.25" Organic Fiber Woofer with a Crossover frequency at 2500Hz.
Frequency Response
S20 has a frequency range of 39-40k Hz whereas TSi200 has a frequency range of 50-24k Hz. With a minimum frequency of 39Hz, the S20 can go significantly deeper on the low side and provide stronger bass compared to the TSi200's min frequency of 50Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
S20 and TSi200 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. S20 sensitivity is rated at 88 dB and the TSi200's is at 89 dB. This 1 dB difference makes the Polk TSi200 a more sensitive speaker compared to Polk S20, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
S20 can handle a max power of 150 watts RMS from the amp the whereas S20 has a max power handling value of 125 watts RMS , 25 watts less than the TSi200.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
S20 features Pair of 5-way binding posts - Gold-plated type posts and TSi200 has a Pair of 5-way binding posts - Gold-plated type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both S20 and TSi200 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk S20's and Polk TSi200's external dimensions. Polk S20 has external dimensions of 376.0 x 216.0 x 350.0mm ( 14.8 x 8.5 x 13.7inch) whereas Polk TSi200 has external dimensions of 392.1 x 203.2 x 298.5mm ( 15.4 x 8.0 x 11.7inch) .
Polk TSi200 is 12.8mm narrower and 51.5mm less deeper than Polk S20 but it is also 16.1mm taller.
Below you can see the front view size comparison of Polk S20 and Polk TSi200 in scale.
Comparison image of Polk S20 and Polk TSi200 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk S20 is approximately 756.0cm2 / 117.2inch2 and base area of the Polk TSi200 is approximately 606.6cm2 / 94.0inch2. The S20 requires 25% more surface area than the TSi200 which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Polk S20 and Polk TSi200 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk S20 weighs 7.73kg / 17lbs and the Polk TSi200 weighs 7.71kg / 17lbs. This makes the S20 0% heavier than the TSi200.
Here is a comparison of how S20 and TSi200's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Polk S20?
Here are the items that are included inside the box of S20:
2 Bookshelf loudspeakers2 Grilles (attached)8 Self-adhesive rubber feetOwners ManualOnline Product Registration
What's in the Box of Polk TSi200?
Here are the items that come with the TSi200:
2 Black bookshelf speakers Detachable cloth grille (installed) 8 Self-adhesive rubber feet Owner's Manual Online registration sheet Polk Audio product brochure
 Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
| Low Frequency Response |
39 Hz
vs
50 Hz
|
Generates deeper bass |
 High Frequency Response |
40k Hz
vs
24k Hz
|
Generates higher frequency |
 Height |
376mm
vs
392mm
|
Easier to fit in smaller spaces |
 Max Input Power |
150 watts
vs
125 watts
|
Handle more power from your amplifier |
 Sensitivity |
89 dB
vs
88 dB
|
Play louder with same amount of amplification power |
| Number of Woofers |
2
vs
1
|
More woofers |
 Base Surface Area |
606cm2 (203x298mm)
vs
756cm2 (216x350mm)
|
Takes less floor space |
| General |
Polk Audio Signature S20 |
Polk Audio TSi200 |
| Brand |
Polk Audio |
Polk Audio |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
20-125 watts |
20-150 watts |
| Sensitivity |
88 dB |
89 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
39-40k Hz |
50-24k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
2 |
| Woofer Size |
6.5" |
5.25" |
| Woofer Composition |
Mica-reinforced polypropylene |
Organic Fiber |
| Woofer Surround Material |
Butyl rubber |
Butyl Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Soft-Dome |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2500Hz |
2500Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
376.0mm (14.8") |
392.1mm (15.4") |
| Width |
216.0mm (8.5") |
203.2mm (8") |
| Depth |
350.0mm (13.8") |
298.5mm (11.8") |
| Weight |
7.73kg (17lbs) |
7.71kg (17lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
Meddite MDF |
Wood-grain vinyl |
| Available Colors |
Black, Walnut, Brown Walnut |
Black, Cherry |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
24-28" |
16-26" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |