In this review, we will be comparing S10 and S15, two Passive Bookshelf speakers by Polk Audio.
Let's have a brief look at the main features
of Polk S10 and Polk S15 first before getting into our more
detailed comparison.
| Key Specs | Polk S10 | Polk S15 |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | 1" Soft-Dome | 1" Dome |
|---|
| Woofer | 4" Mica-reinforced polypropylene | 5.25" Mica-reinforced polypropylene |
|---|
| Frequency response | 67-40k Hz | 50-40k Hz |
|---|
| Sensitivity | 87 dB | 88 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | 20-100 watts | 20-100 watts |
|---|
| Weight | 2.73kg / 6lbs | 5.90kg / 13lbs |
|---|
| Dimensions (H x W x D) | 8.4" x 5.0" x 6.1"
214.0 x 127.0 x 155.0mm | 12.0" x 7.4" x 10.2"
304.8 x 190.0 x 260.4mm |
|---|
S10 and S15 are members of Polk Audio's Signature S series of speakers. Below you can find the loudspeakers from this series.
What size room are the Polk S10 and Polk S15 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Polk S10 |
Polk S15 |
| Near-field |
Average |
Average |
| Small Room |
Good |
Good |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Poor |
| Very Large Room |
Bad |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking
through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both S10 and S15 are 2-way speakers.
Polk S10Polk S15
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Polk S10 |
Polk S15 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 4-inch
|
1 x 5.25-inch
|
S10 features a 1" Terylene Soft-Dome Tweeter and 1 x 4" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz. On the other hand, the S15 features a 1" Terylene Dome Tweeter and 1 x 5.25" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz.
Frequency Response
S10 has a frequency range of 67-40k Hz whereas S15 has a frequency range of 50-40k Hz. With a minimum frequency of 50Hz, the S15 can go significantly deeper on the low side and provide stronger bass compared to the S10's min frequency of 67Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
S10 and S15 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. S10 sensitivity is rated at 87 dB and the S15's is at 88 dB. This 1 dB difference makes the Polk S15 a more sensitive speaker compared to Polk S10, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
S10 and S15 have the same power range of 20-100 watts.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier — change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
S10 features Pair of Binding Posts - Gold Plated type posts and S15 has a Pair of Binding Posts - Gold Plated type posts. None of these speakers feature bi-amping/bi-wiring.
Polk S10's 5-way post terminals
Cabinet Type and Port Position
Both S10 and S15 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk S10's and Polk S15's external dimensions. Polk S10 has external dimensions of 214.0 x 127.0 x 155.0mm (8.4 x 5.0 x 6.1inch) whereas Polk S15 has external dimensions of 304.8 x 190.0 x 260.4mm (12.0 x 7.4 x 10.2inch).
Polk S15 is clearly the larger of the two speakers. Its body is 63mm wider, 90.8mm taller and 105.4mm deeper than Polk S10.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk S10 is approximately 196.9cm2 / 30.5inch2 and base area of the Polk S15 is approximately 494.8cm2 / 76.7inch2. The S10 requires 60% less surface area than the S15 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk S10 weighs 2.73kg / 6lbs and the Polk S15 weighs 5.90kg / 13lbs. This makes the S15 116% heavier than the S10.
Here is a comparison of how S10 and S15's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Polk S10?
Here are the items that are included inside the box of S10:
- 2 Bookshelf loudspeakers
- 2 Grille (attached)
- 8 Self-adhesive rubber feet
- Wall-mount template
- Owners Manual
- Online Product Registration
What's in the Box of Polk S15?
Here are the items that come with the S15:
- 2 Bookshelf loudspeakers
- 2 Grille (attached)
- 8 Self-adhesive rubber feet
- Wall-mount template
- Owners Manual
- Online Product Registration
 Height |
214mm
vs
304mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
196cm2
vs
494cm2
|
Takes less floor space |
 Sensitivity |
88 dB
vs
87 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
5.25 inches
vs
4 inches
|
Larger woofer |
|
Low Frequency Response |
50 Hz
vs
67 Hz
|
Generates deeper bass |
| General |
Polk Audio Signature S10 |
Polk Audio Signature S15 |
| Brand |
Polk Audio |
Polk Audio |
| Speaker Type |
Satellite speakers |
Bookshelf speakers |
| Power Range |
20-100 watts |
20-100 watts |
| Sensitivity |
87 dB |
88 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
67-40k Hz |
50-40k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
4" |
5.25" |
| Woofer Composition |
Mica-reinforced polypropylene |
Mica-reinforced polypropylene |
| Woofer Surround Material |
Butyl rubber |
Butyl rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Soft-Dome |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2500Hz |
2500Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
214.0mm (8.4") |
304.8mm (12") |
| Width |
127.0mm (5") |
190.0mm (7.5") |
| Depth |
155.0mm (6.1") |
260.4mm (10.3") |
| Weight |
2.73kg (6lbs) |
5.90kg (13lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
Meddite MDF |
Meddite MDF |
| Available Colors |
Black |
Black, Walnut, Brown Walnut |
| Mounting Bracket |
Keyhole |
Keyhole |
| Recommended Stand Height |
28-31" |
24-30" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |
Siblings in Polk Audio's Signature S series, so they share a family sound. It comes down to size, output and price.
| Area | Better | Why |
|---|
| Bass |
B |
Polk S15 digs deeper - 50Hz against 67Hz. |
| Amplifier needs |
evenly matched |
Similar sensitivity (87dB vs 88dB) - both want much the same power. |
| Headroom |
evenly matched |
Similar power handling (100W vs 100W). |
| Size |
depends |
Polk S10 is easier to place; Polk S15 is bigger, which usually goes with fuller bass. Your room decides. |
A Polk S10
B Polk S15
depends neither is better in the abstract - it turns on your room, placement or how you will use them.
Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Polk S15 has the edge on paper, though the margin is not large. The rows marked "depends" may matter more to you than the score does. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 67Hz anyway, so judge these on the other rows instead. In a large or open-plan room, Polk S15 has the cabinet volume to fill it more easily; in a small room, near a wall or at desk distance, Polk S10 is the easier speaker to get right.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.