In this review, we will be comparing ES60 and Concord, two Passive Floor-standing speakers from Polk Audio and KLH.
Let's have a brief look at the main features
of Polk ES60 and KLH Concord first before getting into our more
detailed comparison.
Polk ES60 Key Specs
- 2-way Design
- 1" Soft-Dome Tweeter
- 3 x 6.5" Mica-reinforced polypropylene Woofer
- 32-40k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 8ohms
- Power Range:50-300watts
- Weight:23.60kg
- Dimensions (H x W x D): 1131.0" x 8-1/2" x 15-3/4"( 1131.0 x 216.0 x 401.0mm )
KLH Concord Key Specs
- 2-way Design
- 1" Tweeter
- 2 x 6.5" Kevlar Woofer
- 28-23k Hz Frequency Response
- 94 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 225watts
- Weight:20.45kg
- Dimensions (H x W x D): 1026.0" x 8-5/16" x 14-15/16"( 1026.0 x 212.0 x 380.0mm )
In the following sections, we will get into more detail in order to better understand how the Polk ES60 and KLH Concord compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both ES60 and Concord are 2-way speakers.
| Driver |
Polk ES60 |
KLH Concord |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
3 x 6.5-inch
|
2 x 6.5-inch
|
ES60 features a 1" Terylene High-Res Soft-Dome Tweeter and 3 x 6.5" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz. On the other hand, the Concord features a 1" anodized aluminum Tweeter and 2 x 6.5" Kevlar Woofer .
Frequency Response
ES60 has a frequency range of 32-40k Hz whereas Concord has a frequency range of 28-23k Hz. With a minimum frequency of 28Hz, the Concord can go slightly deeper then the ES60's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
ES60 and Concord have the same Impedance of 8 ohms but where they differ is the sensitivity levels. ES60 sensitivity is rated at 90 dB and the Concord's is at 94 dB. This 4 dB difference makes the KLH Concord a more sensitive speaker compared to Polk ES60, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
ES60 can handle a max power of 300 watts RMS from the amp the whereas Concord has a max power handling value of watts RMS, 300 watts less than the ES60.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
ES60 features 5-Way post posts which make bi-amping or bi-wiring possible. Concord has a 5-Way post which doesn't feature bi-amping/bi-wiring.
KLH Concord's 5-Way post terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk ES60's and KLH Concord's external dimensions. Polk ES60 has external dimensions of 1131.0 x 216.0 x 401.0mm ( 44-1/2 x 8-1/2 x 15-3/4inch) whereas KLH Concord has external dimensions of 1026.0 x 212.0 x 380.0mm ( 40-3/8 x 8-5/16 x 14-15/16inch) .
Polk ES60 is clearly the larger of the two speakers. Its body is 4mm wider, 105mm taller and 21mm deeper than KLH Concord.
Below you can see the front view size comparison of Polk ES60 and KLH Concord in scale.
Comparison image of Polk ES60 and KLH Concord Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk ES60 is approximately 866.2cm2 / 134.3inch2 and base area of the KLH Concord is approximately 805.6cm2 / 124.9inch2. The ES60 requires 8% more surface area than the Concord which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk ES60 weighs 23.60kg / 51.9lbs and the KLH Concord weighs 20.45kg / 45lbs. This makes the ES60 15% heavier than the Concord.
Here is a comparison of how ES60 and Concord's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Polk ES60?
Here are the items that are included inside the box of ES60:
Floorstanding loudspeakerGrille (attached)4 Feet (pre-installed)Owners ManualOnline Product Registration
What's in the Box of KLH Concord?
Here are the items that come with the Concord:
Floorstanding loudspeakerGrille4 Spike feet (w/ locking nut attached)4 Protective discs4 Rubber feetPort plugManualATTENTION! note
 Number of Woofers |
3
vs
2
|
More woofers |
 High Frequency Response |
40k Hz
vs
23k Hz
|
Generates higher frequency |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Sensitivity |
94 dB
vs
90 dB
|
Play louder with same amount of amplification power |
|
Low Frequency Response |
28 Hz
vs
32 Hz
|
Generates deeper bass |
 Height |
1026mm
vs
1131mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
805cm2
vs
866cm2
|
Takes less floor space |
 Price per pair* |
1000USD
vs
1098USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Polk Audio Signature Elite ES60 |
KLH Concord |
| Brand |
Polk Audio |
KLH |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
50-300 watts |
up to 225 watts |
| Sensitivity |
90 dB |
94 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
32-40k Hz |
28-23k Hz |
Drivers |
|
|
| Woofer Quantity |
3 |
2 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
Mica-reinforced polypropylene |
Kevlar |
| Woofer Surround Material |
Butyl rubber |
Butyl Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Soft-Dome |
n/a |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2500Hz |
n/a |
| Firing Direction |
bottom |
n/a |
Physical Specs |
|
|
| Height |
1131.0mm (44.5") |
1026.0mm (40.4") |
| Width |
216.0mm (8.5") |
212.0mm (8.3") |
| Depth |
401.0mm (15.8") |
380.0mm (15") |
| Weight |
23.60kg (51.9lbs) |
20.45kg (45lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF, Wood-grain vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Black |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
No |
Other |
|
|
| Parts Warranty |
5 Years |
10 Years |
| Labor Warranty |
5 Years |
10 Years |