In this review, we will be comparing ES15 and XT20, two Passive Bookshelf speakers by Polk Audio Let's have a brief look at the main features
of Polk ES15 and Polk XT20 first before getting into our more
detailed comparison.
What size room are the Polk ES15 and Polk XT20 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk ES15 and Polk XT20 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both ES15 and XT20 are 2-way speakers.
| Driver |
Polk ES15 |
Polk XT20 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.25-inch
|
1 x 6.5-inch
|
ES15 features a 1" Terylene Soft-Dome Tweeter and 1 x 5.25" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz. On the other hand, the XT20 features a 1" Soft-Dome Tweeter and 1 x 6.5" Bi-laminate paper Woofer .
Frequency Response
ES15 has a frequency range of 44-40k Hz whereas XT20 has a frequency range of 38-40k Hz. With a minimum frequency of 38Hz, the XT20 can go significantly deeper on the low side and provide stronger bass compared to the ES15's min frequency of 44Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
ES15 and XT20 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. ES15 sensitivity is rated at 85 dB and the XT20's is at 87 dB. This 2 dB difference makes the Polk XT20 a more sensitive speaker compared to Polk ES15, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
ES15 can handle a max power of 200 watts RMS from the amp the whereas ES15 has a max power handling value of 100 watts RMS , 100 watts less than the XT20.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
ES15 features 5-Way post type posts and XT20 has a 5-Way post type posts. None of these speakers feature bi-amping/bi-wiring.
Polk ES15's 5-Way post terminals
Polk ES15 Power Port Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk ES15's and Polk XT20's external dimensions. Polk ES15 has external dimensions of 307.0 x 193.0 x 259.0mm ( 12-1/16 x 7-9/16 x 10-3/16inch) whereas Polk XT20 has external dimensions of 332.0 x 193.0 x 281.0mm ( 13-1/16 x 7-9/16 x 11-1/16inch) .
Below you can see the front view size comparison of Polk ES15 and Polk XT20 in scale.
Comparison image of Polk ES15 and Polk XT20 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk ES15 is approximately 499.9cm2 / 77.5inch2 and base area of the Polk XT20 is approximately 542.3cm2 / 84.1inch2. The ES15 requires 8% less surface area than the XT20 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Polk ES15 and Polk XT20 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk ES15 weighs 5.91kg / 13lbs and the Polk XT20 weighs 5.45kg / 12lbs. This makes the ES15 8% heavier than the XT20.
Here is a comparison of how ES15 and XT20's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Polk ES15?
Here are the items that are included inside the box of ES15:
2 Bookshelf loudspeakers2 Grille (attached)8 Self-adhesive rubber feetWall-mount templateOwners ManualOnline Product Registration
What's in the Box of Polk XT20?
Here are the items that come with the XT20:
2 Bookshelf loudspeakers2 Grilles (attached)8 Self-adhesive rubber feetOwners ManualOnline Product Registration
 Mounting Bracket |
Yes
vs
No
|
Allows mounting on walls |
 Height |
307mm
vs
332mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
499cm2 (193x259mm)
vs
542cm2 (193x281mm)
|
Takes less floor space |
 Max Input Power |
200 watts
vs
100 watts
|
Handle more power from your amplifier |
 Sensitivity |
87 dB
vs
85 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
| Low Frequency Response |
38 Hz
vs
44 Hz
|
Generates deeper bass |
| General |
Polk Audio Signature Elite ES15 |
Polk Audio Monitor XT20 |
| Brand |
Polk Audio |
Polk Audio |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
20-100 watts |
30-200 watts |
| Sensitivity |
85 dB |
87 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
44-40k Hz |
38-40k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5.25" |
6.5" |
| Woofer Composition |
Mica-reinforced polypropylene |
Bi-laminate paper |
| Woofer Surround Material |
Butyl rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Soft-Dome |
Soft-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2500Hz |
n/a |
| Firing Direction |
rear |
n/a |
Physical Specs |
|
|
| Height |
307.0mm (12.1") |
332.0mm (13.1") |
| Width |
193.0mm (7.6") |
193.0mm (7.6") |
| Depth |
259.0mm (10.2") |
281.0mm (11.1") |
| Weight |
5.91kg (13lbs) |
5.45kg (12lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF, Wood-grain vinyl |
MDF, Vinyl |
| Available Colors |
Black,White,Walnut |
Black |
| Mounting Bracket |
Keyhole |
No |
| Recommended Stand Height |
24-28" |
24-28" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |