In this review, we will be comparing ES10 and XT15, two Passive Bookshelf speakers by Polk Audio Let's have a brief look at the main features
of Polk ES10 and Polk XT15 first before getting into our more
detailed comparison.
What size room are the Polk ES10 and Polk XT15 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk ES10 and Polk XT15 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both ES10 and XT15 are 2-way speakers.
| Driver |
Polk ES10 |
Polk XT15 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 4-inch
|
1 x 5.25-inch
|
ES10 features a 1" Terylene Soft-Dome Tweeter and 1 x 4" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz. On the other hand, the XT15 features a 1" Soft-Dome Tweeter and 1 x 5.25" Bi-laminate paper Woofer .
Frequency Response
ES10 has a frequency range of 78-40k Hz whereas XT15 has a frequency range of 48-40k Hz. With a minimum frequency of 48Hz, the XT15 can go significantly deeper on the low side and provide stronger bass compared to the ES10's min frequency of 78Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
ES10 and XT15 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. ES10 sensitivity is rated at 84 dB and the XT15's is at 86 dB. This 2 dB difference makes the Polk XT15 a more sensitive speaker compared to Polk ES10, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
ES10 can handle a max power of 150 watts RMS from the amp the whereas ES10 has a max power handling value of 100 watts RMS , 50 watts less than the XT15.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
ES10 features 5-Way post type posts and XT15 has a 5-Way post type posts. None of these speakers feature bi-amping/bi-wiring.
Polk ES10's 5-Way post terminals
Polk ES10 Power Port Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk ES10's and Polk XT15's external dimensions. Polk ES10 has external dimensions of 215.0 x 139.0 x 158.0mm ( 8-7/16 x 5-7/16 x 6-3/16inch) whereas Polk XT15 has external dimensions of 270.0 x 167.0 x 183.0mm ( 10-5/8 x 6-9/16 x 7-3/16inch) .
Polk XT15 is clearly the larger of the two speakers. Its body is 28mm wider, 55mm taller and 25mm deeper than Polk ES10.
Below you can see the front view size comparison of Polk ES10 and Polk XT15 in scale.
Comparison image of Polk ES10 and Polk XT15 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk ES10 is approximately 219.6cm2 / 34.0inch2 and base area of the Polk XT15 is approximately 305.6cm2 / 47.4inch2. The ES10 requires 28% less surface area than the XT15 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Polk ES10 and Polk XT15 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk ES10 weighs 2.73kg / 6lbs and the Polk XT15 weighs 4.09kg / 9lbs. This makes the XT15 50% heavier than the ES10.
Here is a comparison of how ES10 and XT15's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Polk ES10?
Here are the items that are included inside the box of ES10:
2 Bookshelf loudspeakers2 Grille (attached)8 Self-adhesive rubber feetWall-mount templateOwners ManualOnline Product Registration
What's in the Box of Polk XT15?
Here are the items that come with the XT15:
2 Bookshelf loudspeakers2 Grilles (attached)8 Self-adhesive rubber feetOwners ManualOnline Product Registration
 Mounting Bracket |
Yes
vs
No
|
Allows mounting on walls |
 Height |
215mm
vs
270mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
219cm2 (139x158mm)
vs
305cm2 (167x183mm)
|
Takes less floor space |
 Max Input Power |
150 watts
vs
100 watts
|
Handle more power from your amplifier |
 Sensitivity |
86 dB
vs
84 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
5.25 inches
vs
4 inches
|
Larger woofer |
| Low Frequency Response |
48 Hz
vs
78 Hz
|
Generates deeper bass |
 Price per pair* |
199USD
vs
249USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Polk Audio Signature Elite ES10 |
Polk Audio Monitor XT15 |
| Brand |
Polk Audio |
Polk Audio |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
20-100 watts |
30-150 watts |
| Sensitivity |
84 dB |
86 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
78-40k Hz |
48-40k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
4" |
5.25" |
| Woofer Composition |
Mica-reinforced polypropylene |
Bi-laminate paper |
| Woofer Surround Material |
Butyl rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Soft-Dome |
Soft-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2500Hz |
n/a |
| Firing Direction |
rear |
n/a |
Physical Specs |
|
|
| Height |
215.0mm (8.5") |
270.0mm (10.6") |
| Width |
139.0mm (5.5") |
167.0mm (6.6") |
| Depth |
158.0mm (6.2") |
183.0mm (7.2") |
| Weight |
2.73kg (6lbs) |
4.09kg (9lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF, Wood-grain vinyl |
MDF, Vinyl |
| Available Colors |
Black,White,Walnut |
Black |
| Mounting Bracket |
Keyhole |
No |
| Recommended Stand Height |
28-32" |
28-32" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |