In this review, we will be comparing RTi A3 and Q150, two Passive Bookshelf speakers from Polk Audio and KEF. Let's have a brief look at the main features
of Polk RTi A3 and KEF Q150 first before getting into our more
detailed comparison.
What size room are the Polk RTi A3 and KEF Q150 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk RTi A3 and KEF Q150 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RTi A3 and Q150 are 2-way speakers.
Driver |
Polk RTi A3 |
KEF Q150 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 6.5-inch
|
1 x 5.25-inch
|
RTi A3 features a 1" silk polymer composite Dome Tweeter and 1 x 6.5" Polymer composite Woofer with a Crossover frequency at 2800Hz. On the other hand, the Q150 features a 1" vented aluminum Dome Tweeter and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 2500Hz.
Frequency Response
RTi A3 has a frequency range of 50-26k Hz whereas Q150 has a frequency range of 51-28k Hz. With a minimum frequency of 50Hz, the RTi A3 can go slightly deeper then the Q150's min frequency of 51Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RTi A3 and Q150 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RTi A3 sensitivity is rated at 89 dB and the Q150's is at 86 dB. This 3 dB difference makes the Polk RTi A3 a more sensitive speaker compared to KEF Q150, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
RTi A3 can handle a max power of 150 watts RMS from the amp the whereas Q150 has a max power handling value of 100 watts RMS, 50 watts less than the RTi A3.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RTi A3 features Pair of Dual 5-way Binding Posts - Gold-Plated posts which make bi-amping or bi-wiring possible. Q150 has a Post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
RTi A3 has a back and front firing port whereas Q150 has a rear firing ports.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk RTi A3's and KEF Q150's external dimensions. Polk RTi A3 has external dimensions of 374.7 x 214.4 x 355.6mm ( 14.7 x 8.4 x 14.0inch) whereas KEF Q150 has external dimensions of 303.0 x 180.0 x 278.0mm ( 11.9 x 7.0 x 10.9inch) .
Polk RTi A3 is clearly the larger of the two speakers. Its body is 34.4mm wider, 71.7mm taller and 77.6mm deeper than KEF Q150.
Below you can see the front view size comparison of Polk RTi A3 and KEF Q150 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk RTi A3 is approximately 762.4cm2 / 118.2inch2 and base area of the KEF Q150 is approximately 500.4cm2 / 77.6inch2. The RTi A3 requires 52% more surface area than the Q150 which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk RTi A3 weighs 7.26kg / 16lbs and the KEF Q150 weighs 5.60kg / 12.3lbs. This makes the RTi A3 30% heavier than the Q150.
Here is a comparison of how RTi A3 and Q150's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Polk RTi A3?
Here are the items that are included inside the box of RTi A3:
2 Cherry bookshelf speakers 2 Self-tapping screws 8 Self-adhesive rubber feet Owner's Manual Template Online registration sheet Polk Audio product brochure
What's in the Box of KEF Q150?
Here are the items that come with the Q150:
2 Bookshelf loudspeakers 2 Foam port plugs 8 Self-adhesive rubber feet Owner's Manual Warranty Registration Card
Max Input Power |
150 watts
vs
100 watts
|
Handle more power from your amplifier |
Sensitivity |
89 dB
vs
86 dB
|
Play louder with same amount of amplification power |
Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
Low Frequency Response |
50 Hz
vs
51 Hz
|
Generates deeper bass |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Mounting Bracket |
Yes
vs
No
|
Allows mounting on walls |
Price per pair* |
465USD
vs
600USD
|
costs less (*prices may change depending on the seller, location and time) |
High Frequency Response |
28k Hz
vs
26k Hz
|
Generates higher frequency |
Height |
303mm
vs
374mm
|
Easier to fit in smaller spaces |
Base Surface Area |
500cm2 (180x278mm)
vs
762cm2 (214x355mm)
|
Takes less floor space |
General |
Polk Audio RTi A3 |
KEF Q150 |
Brand |
Polk Audio |
KEF |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
20-150 watts |
10-100 watts |
Sensitivity |
89 dB |
86 dB |
Impedance |
8 ohms |
8 ohms |
Impedance |
n/a |
3.7 ohms |
Frequency Response |
50-26k Hz |
51-28k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6.5" |
5.25" |
Woofer Composition |
Polymer composite |
Aluminum |
Woofer Surround Material |
Butyl rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Dome |
Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2800Hz |
2500Hz |
Firing Direction |
back and front |
rear |
Physical Specs |
|
|
Height |
374.7mm (14.8") |
303.0mm (11.9") |
Width |
214.4mm (8.4") |
180.0mm (7.1") |
Depth |
355.6mm (14") |
278.0mm (10.9") |
Weight |
7.26kg (16lbs) |
5.60kg (12.3lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
Real wood veneer |
MDF/Vinyl-wrapped |
Available Colors |
Black, Cherry |
Black, Walnut, White |
Mounting Bracket |
Keyhole |
No |
Recommended Stand Height |
24-31" |
18-24" |
Grille |
n/a |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |