In this review, we will be comparing Monitor XT30 and ES35, two Passive Center Channel speakers by Polk Audio.
Let's have a brief look at the main features
of Polk XT30 and Polk ES35 first before getting into our more
detailed comparison.
| Key Specs | Polk XT30 | Polk ES35 |
|---|
| Brand | Polk Audio
United States · founded 1972 | Polk Audio
United States · founded 1972 |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | 1" High-res dome | 1" High-res dome |
|---|
| Woofer | 2 x 5.25" bi-laminate paper cone | 6 x 3" mica-reinforced polypropylene Dynamic Balance |
|---|
| Frequency response | 55-40k Hz | 66-40k Hz |
|---|
| Sensitivity | 89 dB | 89 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | 30-200 watts | 20-150 watts |
|---|
| Weight | 5.91kg / 13lbs | 6.36kg / 14lbs |
|---|
| Dimensions (H x W x D) | 6-1/2" x 19-1/16" x 8-3/16"
166.0 x 485.0 x 208.0mm | 4-3/16" x 24-7/16" x 6-1/16"
107.0 x 621.0 x 154.0mm |
|---|
What size room are the Polk XT30 and Polk ES35 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Polk XT30 |
Polk ES35 |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both Monitor XT30 and ES35 are 2-way speakers.
Polk XT30Polk ES35
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Polk XT30 |
Polk ES35 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 5.25-inch
|
6 x 3-inch
|
Monitor XT30 features a 1" Terylene High-res dome Tweeter and 2 x 5.25" bi-laminate paper cone Woofer. On the other hand, the ES35 features a 1" Terylene High-res dome Tweeter and 6 x 3" mica-reinforced polypropylene Dynamic Balance Woofer.
Frequency Response
Monitor XT30 has a frequency range of 55-40k Hz whereas ES35 has a frequency range of 66-40k Hz. With a minimum frequency of 55Hz, the Monitor XT30 can go significantly deeper on the low side and provide stronger bass compared to the ES35's min frequency of 66Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Monitor XT30 and ES35 have the same Impedance of 8 ohms and their sensitivity is also same at 89 dB.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Monitor XT30 can handle a max power of 200 watts RMS, whereas ES35 has a max power handling value of 150 watts RMS, 50 watts less than the Monitor XT30.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Monitor XT30 features 5-Way post type posts and ES35 has a 5-Way post type posts. None of these speakers feature bi-amping/bi-wiring.
Polk XT30's 5-Way post terminals
Polk ES35's 5-Way post terminals
Cabinet Type and Port Position
Both Monitor XT30 and ES35 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Polk ES35 Port
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk XT30's and Polk ES35's external dimensions. Polk XT30 has external dimensions of 166.0 x 485.0 x 208.0mm (6-1/2 x 19-1/16 x 8-3/16inch) whereas Polk ES35 has external dimensions of 107.0 x 621.0 x 154.0mm (4-3/16 x 24-7/16 x 6-1/16inch).
Polk ES35 is 59mm shorter and 54mm less deeper than Polk XT30 but it is also 136mm wider.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Near-identical footprints. Polk XT30 is 54mm deeper, so it stands that much further out from the wall. Polk XT30 is 59mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk XT30 is approximately 1008.8cm2 / 156.4inch2 and base area of the Polk ES35 is approximately 956.3cm2 / 148.2inch2. The Monitor XT30 requires 5% more surface area than the ES35 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk XT30 weighs 5.91kg / 13lbs and the Polk ES35 weighs 6.36kg / 14lbs. This makes the ES35 8% heavier than the Monitor XT30.
Here is a comparison of how Monitor XT30 and ES35's weights compare with the average, max and min weights in Passive Center Channel class.
Weight
All Center Channel Speakers
What's in the Box of Polk XT30?
Here are the items that are included inside the box of Monitor XT30:
- Center-channel loudspeaker
- Grille (attached)
- 4 Self-adhesive rubber feet
- Owners Manual
- Online Product Registration
- Wall-Mount Template
What's in the Box of Polk ES35?
Here are the items that come with the ES35:
- LCR loudspeaker
- Grille (attached)
- 4 Self-adhesive rubber feet
- Wall-mount template
- Owners Manual
- Online Product Registration
 Max Input Power |
200 watts
vs
150 watts
|
Handle more power from your amplifier |
 Woofer Size |
5.25 inches
vs
3 inches
|
Larger woofer |
|
Low Frequency Response |
55 Hz
vs
66 Hz
|
Generates deeper bass |
 Price per pair* |
199USD
vs
399USD
|
costs less (*prices may change depending on the seller, location and time) |
|
Number of Woofers |
6
vs
2
|
More woofers |
 Height |
107mm
vs
166mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
956cm2
vs
1008cm2
|
Takes less floor space |
| General |
Polk Audio Monitor XT30 |
Polk Audio Signature Elite ES35 |
| Brand |
Polk Audio |
Polk Audio |
| Speaker Type |
Center channel speaker |
Low-profile center channel speaker |
| Power Range |
30-200 watts |
20-150 watts |
| Sensitivity |
89 dB |
89 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
55-40k Hz |
66-40k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
6 |
| Woofer Size |
5.25" |
3" |
| Woofer Composition |
bi-laminate paper cone |
mica-reinforced polypropylene Dynamic Balance |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
High-res dome |
High-res dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
166.0mm (6.5") |
107.0mm (4.2") |
| Width |
485.0mm (19.1") |
621.0mm (24.4") |
| Depth |
208.0mm (8.2") |
154.0mm (6.1") |
| Weight |
5.91kg (13lbs) |
6.36kg (14lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF, Wood-grain vinyl |
| Available Colors |
Black |
Black, Walnut, White |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |
These sit in different price classes - Polk ES35 costs roughly 2x what Polk XT30 does. Expect it to lead on paper; the question is whether the gap is audible enough in your room to be worth it.
| Area | Better | Why |
|---|
| Bass | A | Polk XT30 digs deeper - 55Hz against 66Hz. |
| Amplifier needs | evenly matched | Similar sensitivity (89dB vs 89dB) - both want much the same power. |
| Headroom | A | Polk XT30 takes more power (200W vs 150W) - more in hand in a big room. |
| Size | depends | Polk ES35 is easier to place; Polk XT30 is bigger, which usually goes with fuller bass. Your room decides. |
| Expandability | depends | Neither adds bi-amping, a sub output or height drivers. Polk ES35 sits in a wider range (12 models), so a matched surround system is easier later. |
| Price | A | Polk XT30 is cheaper - $199 against $399, about 50% less; arguably a different class. |
A Polk XT30 B Polk ES35
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Polk XT30 is the easier recommendation: it leads on most of the measured areas and costs less. Take Polk ES35 if its size, looks or fit in your room suit you better. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 66Hz anyway, so judge these on the other rows instead. In a large or open-plan room, Polk XT30 has the cabinet volume to fill it more easily; in a small room, near a wall or at desk distance, Polk ES35 is the easier speaker to get right.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.