In this review, we will be comparing 265-LS and RC85i, two Passive In-wall speakers by Polk Audio Let's have a brief look at the main features
of Polk Audio 265-LS and Polk Audio RC85i first before getting into our more
detailed comparison.
What size room are the Polk Audio 265-LS and Polk Audio RC85i speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk Audio 265-LS and Polk Audio RC85i compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that 265-LS is a 3-way design whereas the RC85i is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Polk Audio 265-LS |
Polk Audio RC85i |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 6.5-inch |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 8-inch
|
265-LS features a 1" Ring Radiator Tweeter , a 6.5" Midrange and 1 x 6.5" Aerated polypropylene Woofer . On the other hand, the RC85i features a 1" Hard-Dome Tweeter and 1 x 8" Polypropylene Woofer .
Frequency Response
265-LS has a frequency range of 28-33kHz whereas RC85i has a frequency range of 50-20kHz. With a minimum frequency of 28Hz, the 265-LS can go significantly deeper on the low side and provide stronger bass compared to the RC85i's min frequency of 50Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the In-wall class in our database.
Low Frequency
In-wall Speakers
High Frequency
In-wall Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
265-LS and RC85i have the same Impedance of 8 ohms but where they differ is the sensitivity levels. 265-LS sensitivity is rated at 91 dB and the RC85i's is at 90 dB. This 1 dB difference makes the Polk Audio 265-LS a more sensitive speaker compared to Polk Audio RC85i, hence will play louder with the same amount of watts.
Sensitivity
In-wall Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
265-LS can handle a max power of 200 watts RMS from the amp the whereas RC85i has a max power handling value of 100 watts RMS, 100 watts less than the 265-LS.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
265-LS features Spring clip type posts and RC85i has a Spring clip type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk Audio 265-LS's and Polk Audio RC85i's external dimensions. Polk Audio 265-LS has external dimensions of ( 19.1875-inch x 7.2500-inch x 0.0000-inch) whereas Polk Audio RC85i has external dimensions of 324.0 x 221.0 x 89.0mm ( 12.7500-inch x 8.6875-inch x 3.5000-inch) .
Polk Audio 265-LS is 36mm narrower and 89mm less deeper than Polk Audio RC85i but it is also 164mm taller.
What's in the Box of Polk Audio 265-LS?
Here are the items that are included inside the box of 265-LS:
In-wall loudspeakerWhite metal grillePower Port plugMounting templateOwners Manual
What's in the Box of Polk Audio RC85i?
Here are the items that come with the RC85i:
2 White in-wall speakers2 White grilles1 Cardboard Mounting TemplateOwners ManualOnline registration sheetProduct Registration Card