In this review, we will be comparing Synchrony T600 and AK6, two Passive Floor-standing speakers from PSB and Klipsch. Let's have a brief look at the main features
of PSB Synchrony T600 and Klipsch Klipschorn AK6 first before getting into our more
detailed comparison.
In the following sections, we will get into more detail in order to better understand how the PSB Synchrony T600 and Klipsch Klipschorn AK6 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Synchrony T600 and AK6 are 3-way speakers.
| Driver |
PSB Synchrony T600 |
Klipsch Klipschorn AK6 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 5.25-inch |
1 x 2-inch |
|
Woofer
|
3 x 6.5-inch
|
1 x 15-inch
|
Synchrony T600 features a 1" titanium with ferrofluid cooling and neodymium magnet Dome Tweeter , a 5.25" Midrange and 3 x 6.5" Carbon fiber Woofer with a Crossover frequency at 450Hz and 1800Hz. On the other hand, the AK6 features a 1" polyimide diaphragm compression Tractrix horn Tweeter , a 2" Midrange and 1 x 15" fiber-composite with a trihedral exponential folded horn Woofer .
Frequency Response
Synchrony T600 has a frequency range of 24-23k Hz whereas AK6 has a frequency range of 33-20k Hz. With a minimum frequency of 24Hz, the Synchrony T600 can go significantly deeper on the low side and provide stronger bass compared to the AK6's min frequency of 33Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Synchrony T600 is a 4 ohms speaker compared to the AK6 which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Synchrony T600 can provide this impedance level.
These two speakers also have different sensitivity levels. Synchrony T600 sensitivity is rated at 89 dB and the AK6's is rated at 105 dB. This 16 dB difference makes the Klipsch Klipschorn AK6 a more sensitive speaker compared to PSB Synchrony T600, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Synchrony T600 can handle a max power of 300 watts RMS from the amp the whereas AK6 has a max power handling value of 100 watts RMS, 200 watts less than the Synchrony T600.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Synchrony T600 and AK6 features dual binding post speaker terminals for bi-amping or bi-wiring.
PSB Synchrony T600's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare PSB Synchrony T600's and Klipsch Klipschorn AK6's external dimensions. PSB Synchrony T600 has external dimensions of 1048.0 x 228.0 x 343.0mm ( 41-1/4 x 9 x 13-1/2inch) whereas Klipsch Klipschorn AK6 has external dimensions of 1347.0 x 794.0 x 718.0mm ( 53 x 31-1/4 x 28-1/4inch) .
Klipsch Klipschorn AK6 is clearly the larger of the two speakers. Its body is 566mm wider, 299mm taller and 375mm deeper than PSB Synchrony T600.
Below you can see the front view size comparison of PSB Synchrony T600 and Klipsch Klipschorn AK6 in scale.
Comparison image of PSB Synchrony T600 and Klipsch Klipschorn AK6 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the PSB Synchrony T600 is approximately 782.0cm2 / 121.2inch2 and base area of the Klipsch Klipschorn AK6 is approximately 5700.9cm2 / 883.6inch2. The Synchrony T600 requires 86% less surface area than the AK6 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The PSB Synchrony T600 weighs 34.90kg / 76.8lbs and the Klipsch Klipschorn AK6 weighs 100.00kg / 220lbs. This makes the AK6 187% heavier than the Synchrony T600.
Here is a comparison of how Synchrony T600 and AK6's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of PSB Synchrony T600?
Here are the items that are included inside the box of Synchrony T600:
Floorstanding loudspeakrGrille2 Binding-post jumpers (pre-installed)4 Isolation feet2 Port plugsOwners ManualWarranty Card
What's in the Box of Klipsch Klipschorn AK6?
Here are the items that come with the AK6:
2 Loudspeaker cabinets2 Subwoofer cabinets2 GrillesOwners ManualCongratulations letterKlipsch brochure
 Max Input Power |
300 watts
vs
100 watts
|
Handle more power from your amplifier |
 Number of Woofers |
3
vs
1
|
More woofers |
| Low Frequency Response |
24 Hz
vs
33 Hz
|
Generates deeper bass |
 High Frequency Response |
23k Hz
vs
20k Hz
|
Generates higher frequency |
 Height |
1048mm
vs
1347mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
782cm2 (228x343mm)
vs
5700cm2 (794x718mm)
|
Takes less floor space |
 Price per pair* |
8000USD
vs
16498USD
|
costs less (*prices may change depending on the seller, location and time) |
 Sensitivity |
105 dB
vs
89 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
| Woofer Size |
15 inches
vs
6.5 inches
|
Larger woofer |
| General |
PSB Synchrony T600 |
Klipsch Heritage Klipschorn AK6 |
| Brand |
PSB |
Klipsch |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
20-300 watts |
up to 100 watts |
| Sensitivity |
89 dB |
105 dB |
| Impedance |
4 ohms |
8 ohms |
| Impedance |
4 ohms |
n/a |
| Frequency Response |
24-23k Hz |
33-20k Hz |
Drivers |
|
|
| Woofer Quantity |
3 |
1 |
| Woofer Size |
6.5" |
15" |
| Woofer Composition |
Carbon fiber |
fiber-composite with a trihedral exponential folded horn |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Dome |
Tractrix horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
5.25" |
2" |
| Crossover Frequency |
450Hz and 1800Hz |
n/a |
| Firing Direction |
rear |
n/a |
Physical Specs |
|
|
| Height |
1048.0mm (41.3") |
1347.0mm (53") |
| Width |
228.0mm (9") |
794.0mm (31.3") |
| Depth |
343.0mm (13.5") |
718.0mm (28.3") |
| Weight |
34.90kg (76.8lbs) |
100.00kg (220lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Finish |
MDF/Lacquer |
MDF/Wood veneer |
| Available Colors |
Gloss Black, Satin Walnut |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
10 Years |
| Labor Warranty |
5 Years |
10 Years |