In this review, we will be comparing Imagine X2T and 700F, two Passive Floor-standing speakers from PSB and Paradigm. Let's have a brief look at the main features
of PSB Imagine X2T and Paradigm 700F first before getting into our more
detailed comparison.
What size room are the PSB Imagine X2T and Paradigm 700F speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the PSB Imagine X2T and Paradigm 700F compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Imagine X2T and 700F are 3-way speakers.
| Driver |
PSB Imagine X2T |
Paradigm 700F |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 5.25-inch |
1 x 5.5-inch |
|
Woofer
|
2 x 6.2-inch
|
2 x 5.5-inch
|
Imagine X2T features a 1" titanium with neodymium magnets Dome Tweeter , a 5.25" Midrange and 2 x 6.2" Clay/Ceramic/Poly Woofer with a Crossover frequency at 500Hz and 2200Hz. On the other hand, the 700F features a 1" Tweeter , a 5.5" Midrange and 2 x 5.5" Carbon-Infused Polypropylene Woofer .
Frequency Response
Imagine X2T has a frequency range of 30-23k Hz whereas 700F has a frequency range of 45-25k Hz. With a minimum frequency of 30Hz, the Imagine X2T can go significantly deeper on the low side and provide stronger bass compared to the 700F's min frequency of 45Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Imagine X2T and 700F have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Imagine X2T sensitivity is rated at 90 dB and the 700F's is at 91 dB. This 1 dB difference makes the Paradigm 700F a more sensitive speaker compared to PSB Imagine X2T, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Imagine X2T can handle a max power of 200 watts RMS from the amp the whereas 700F has a max power handling value of 180 watts RMS, 20 watts less than the Imagine X2T.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Imagine X2T and 700F features dual binding post speaker terminals for bi-amping or bi-wiring.
PSB Imagine X2T's 5-Way post terminals allows Bi-amping or bi-wiring
Paradigm 700F's Posts terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Imagine X2T has a front firing port whereas 700F has a rear firing ports. PSB Imagine X2T's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Paradigm 700F with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare PSB Imagine X2T's and Paradigm 700F's external dimensions. PSB Imagine X2T has external dimensions of 1020.0 x 229.0 x 426.0mm ( 40-1/8 x 9 x 16-3/4inch) whereas Paradigm 700F has external dimensions of 1018.0 x 215.0 x 328.0mm ( 40-1/16 x 8-7/16 x 12-7/8inch) .
PSB Imagine X2T is clearly the larger of the two speakers. Its body is 14mm wider, 2mm taller and 98mm deeper than Paradigm 700F.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the PSB Imagine X2T is approximately 975.5cm2 / 151.2inch2 and base area of the Paradigm 700F is approximately 705.2cm2 / 109.3inch2. The Imagine X2T requires 38% more surface area than the 700F which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The PSB Imagine X2T weighs 23.60kg / 51.9lbs and the Paradigm 700F weighs 21.91kg / 48.2lbs. This makes the Imagine X2T 8% heavier than the 700F.
Here is a comparison of how Imagine X2T and 700F's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of PSB Imagine X2T?
Here are the items that are included inside the box of Imagine X2T:
Floor-standing speakerGrille4 Rubber feet4 Spiked FeetWrenchQuick Start GuideWarranty Card
What's in the Box of Paradigm 700F?
Here are the items that come with the 700F:
Floorstanding loudspeaker
Grille
4 Rubber feet
4 Spike feet
4 Hex-nuts
2 Binding-post jumpers (pre-installed)
Owner's Manual
Online Registration Card
Unboxing Instructions
 Max Input Power |
200 watts
vs
180 watts
|
Handle more power from your amplifier |
 Woofer Size |
6.2 inches
vs
5.5 inches
|
Larger woofer |
| Low Frequency Response |
30 Hz
vs
45 Hz
|
Generates deeper bass |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 Price per pair* |
1500USD
vs
1700USD
|
costs less (*prices may change depending on the seller, location and time) |
 Sensitivity |
91 dB
vs
90 dB
|
Play louder with same amount of amplification power |
 High Frequency Response |
25k Hz
vs
23k Hz
|
Generates higher frequency |
 Height |
1018mm
vs
1020mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
705cm2 (215x328mm)
vs
975cm2 (229x426mm)
|
Takes less floor space |
| General |
PSB Imagine X2T |
Paradigm Premier 700F |
| Brand |
PSB |
Paradigm |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
20-200 watts |
15-180 watts |
| Sensitivity |
90 dB |
91 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
30-23k Hz |
45-25k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6.2" |
5.5" |
| Woofer Composition |
Clay/Ceramic/Poly |
Carbon-Infused Polypropylene |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Dome |
n/a |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
5.25" |
5.5" |
| Crossover Frequency |
500Hz and 2200Hz |
n/a |
| Firing Direction |
front |
rear |
Physical Specs |
|
|
| Height |
1020.0mm (40.2") |
1018.0mm (40.1") |
| Width |
229.0mm (9") |
215.0mm (8.5") |
| Depth |
426.0mm (16.8") |
328.0mm (12.9") |
| Weight |
23.60kg (51.9lbs) |
21.91kg (48.2lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain |
MDF/Lacquer |
| Available Colors |
Black |
Gloss Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |