In this review, we will be comparing Imagine X2T and Chora 816, two Passive Floor-standing speakers from PSB and Focal. Let's have a brief look at the main features
of PSB Imagine X2T and Focal Chora 816 first before getting into our more
detailed comparison.
What size room are the PSB Imagine X2T and Focal Chora 816 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the PSB Imagine X2T and Focal Chora 816 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Imagine X2T and Chora 816 are 3-way speakers.
| Driver |
PSB Imagine X2T |
Focal Chora 816 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 5.25-inch |
1 x 6.5-inch |
|
Woofer
|
2 x 6.2-inch
|
1 x 6.5-inch
|
Imagine X2T features a 1" titanium with neodymium magnets Dome Tweeter , a 5.25" Midrange and 2 x 6.2" Clay/Ceramic/Poly Woofer with a Crossover frequency at 500Hz and 2200Hz. On the other hand, the Chora 816 features a 1" TNF Al/Mg inverted dome Tweeter , a 6.5" Midrange and 1 x 6.5" Slatefiber Woofer with a Crossover frequency at 270Hz and 2700Hz.
Frequency Response
Imagine X2T has a frequency range of 30-23k Hz whereas Chora 816 has a frequency range of 50-28k Hz. With a minimum frequency of 30Hz, the Imagine X2T can go significantly deeper on the low side and provide stronger bass compared to the Chora 816's min frequency of 50Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Imagine X2T and Chora 816 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Imagine X2T sensitivity is rated at 90 dB and the Chora 816's is at 89.5 dB.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Imagine X2T features 5-Way post posts which make bi-amping or bi-wiring possible. Chora 816 has a Binding post which doesn't feature bi-amping/bi-wiring.
PSB Imagine X2T's 5-Way post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both Imagine X2T and Chora 816 have front firing ports. front ported speakers offers more flexibility in placement in regards to proximity to walls&surfaces compared to rear ported speakers.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare PSB Imagine X2T's and Focal Chora 816's external dimensions. PSB Imagine X2T has external dimensions of 1020.0 x 229.0 x 426.0mm ( 40-1/8 x 9 x 16-3/4inch) whereas Focal Chora 816 has external dimensions of 1007.0 x 305.0 x 404.0mm ( 39-5/8 x 12 x 15-7/8inch) .
Focal Chora 816 is 13mm shorter and 22mm less deeper than PSB Imagine X2T but it is also 76mm wider.
Below you can see the front view size comparison of PSB Imagine X2T and Focal Chora 816 in scale.
Comparison image of PSB Imagine X2T and Focal Chora 816 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the PSB Imagine X2T is approximately 975.5cm2 / 151.2inch2 and base area of the Focal Chora 816 is approximately 1232.2cm2 / 191.0inch2. The Imagine X2T requires 21% less surface area than the Chora 816 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The PSB Imagine X2T weighs 23.60kg / 51.9lbs and the Focal Chora 816 weighs 18.50kg / 40.7lbs. This makes the Imagine X2T 28% heavier than the Chora 816.
Here is a comparison of how Imagine X2T and Chora 816's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of PSB Imagine X2T?
Here are the items that are included inside the box of Imagine X2T:
Floor-standing speakerGrille4 Rubber feet4 Spiked FeetWrenchQuick Start GuideWarranty Card
What's in the Box of Focal Chora 816?
Here are the items that come with the Chora 816:
Floorstanding loudspeakerBase4 Rubber feet4 Spike feet4 Nuts4 Screws4 WashersHex-keyGrilleUser manual
 Number of Woofers |
2
vs
1
|
More woofers |
| Low Frequency Response |
30 Hz
vs
50 Hz
|
Generates deeper bass |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Base Surface Area |
975cm2 (229x426mm)
vs
1232cm2 (305x404mm)
|
Takes less floor space |
 Price per pair* |
1500USD
vs
1798USD
|
costs less (*prices may change depending on the seller, location and time) |
| Woofer Size |
6.5 inches
vs
6.2 inches
|
Larger woofer |
 High Frequency Response |
28k Hz
vs
23k Hz
|
Generates higher frequency |
 Height |
1007mm
vs
1020mm
|
Easier to fit in smaller spaces |
| General |
PSB Imagine X2T |
Focal Chora 816 |
| Brand |
PSB |
Focal |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
20-200 watts |
40-200 watts |
| Sensitivity |
90 dB |
89.5 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
n/a |
4 ohms |
| Frequency Response |
30-23k Hz |
50-28k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
1 |
| Woofer Size |
6.2" |
6.5" |
| Woofer Composition |
Clay/Ceramic/Poly |
Slatefiber |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Dome |
inverted dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
5.25" |
6.5" |
| Crossover Frequency |
500Hz and 2200Hz |
270Hz and 2700Hz |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
1020.0mm (40.2") |
1007.0mm (39.6") |
| Width |
229.0mm (9") |
305.0mm (12") |
| Depth |
426.0mm (16.8") |
404.0mm (15.9") |
| Weight |
23.60kg (51.9lbs) |
18.50kg (40.7lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain |
MDF/Vinyl-wrap |
| Available Colors |
Black |
Black, Dark wood, Light wood |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |