In this review, we will be comparing Imagine X2T and Emit M30, two Passive Floor-standing speakers from PSB and Dynaudio. Let's have a brief look at the main features
of PSB Imagine X2T and Dynaudio Emit M30 first before getting into our more
detailed comparison.
What size room are the PSB Imagine X2T and Dynaudio Emit M30 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the PSB Imagine X2T and Dynaudio Emit M30 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Imagine X2T is a 3-way design whereas the Emit M30 is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
PSB Imagine X2T |
Dynaudio Emit M30 |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
1-inch
|
1.1-inch
|
|
Midrange
|
1 x 5.25-inch |
- |
|
Woofer
|
2 x 6.2-inch
|
2 x 6.6875-inch
|
Imagine X2T features a 1" titanium with neodymium magnets Dome Tweeter , a 5.25" Midrange and 2 x 6.2" Clay/Ceramic/Poly Woofer with a Crossover frequency at 500Hz and 2200Hz. On the other hand, the Emit M30 features a 1.1" Tweeter and 2 x 6.6875" Magnesium Silicate Polymer Woofer .
Frequency Response
Imagine X2T has a frequency range of 30-23k Hz whereas Emit M30 has a frequency range of 40-23k Hz. With a minimum frequency of 30Hz, the Imagine X2T can go significantly deeper on the low side and provide stronger bass compared to the Emit M30's min frequency of 40Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Imagine X2T is a 8 ohms speaker compared to the Emit M30 which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Emit M30 can provide this impedance level.
These two speakers also have different sensitivity levels. Imagine X2T sensitivity is rated at 90 dB and the Emit M30's is rated at 86 dB. This 4 dB difference makes the PSB Imagine X2T a more sensitive speaker compared to Dynaudio Emit M30, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Imagine X2T features 5-Way post posts which make bi-amping or bi-wiring possible. Emit M30 has a Binding post which doesn't feature bi-amping/bi-wiring.
PSB Imagine X2T's 5-Way post terminals allows Bi-amping or bi-wiring
Dynaudio Emit M30's Binding post terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare PSB Imagine X2T's and Dynaudio Emit M30's external dimensions. PSB Imagine X2T has external dimensions of 1020.0 x 229.0 x 426.0mm ( 40-1/8 x 9 x 16-3/4inch) whereas Dynaudio Emit M30 has external dimensions of 961.0 x 205.0 x 296.0mm ( 37-13/16 x 8-1/16 x 11-5/8inch) .
PSB Imagine X2T is clearly the larger of the two speakers. Its body is 24mm wider, 59mm taller and 130mm deeper than Dynaudio Emit M30.
Below you can see the front view size comparison of PSB Imagine X2T and Dynaudio Emit M30 in scale.
Comparison image of PSB Imagine X2T and Dynaudio Emit M30 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the PSB Imagine X2T is approximately 975.5cm2 / 151.2inch2 and base area of the Dynaudio Emit M30 is approximately 606.8cm2 / 94.1inch2. The Imagine X2T requires 61% more surface area than the Emit M30 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The PSB Imagine X2T weighs 23.60kg / 51.9lbs and the Dynaudio Emit M30 weighs 18.18kg / 40lbs. This makes the Imagine X2T 30% heavier than the Emit M30.
Here is a comparison of how Imagine X2T and Emit M30's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of PSB Imagine X2T?
Here are the items that are included inside the box of Imagine X2T:
Floor-standing speakerGrille4 Rubber feet4 Spiked FeetWrenchQuick Start GuideWarranty Card
What's in the Box of Dynaudio Emit M30?
Here are the items that come with the Emit M30:
Floorstanding loudspeakerGrilleFoam port plug4 Spike feet4 Hex nuts4 Protective discsOwners ManualQuick Start GuideWarranty Extension Card
 Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
 Sensitivity |
90 dB
vs
86 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
 Low Frequency Response |
30 Hz
vs
40 Hz
|
Generates deeper bass |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Price per pair* |
1500USD
vs
2000USD
|
costs less (*prices may change depending on the seller, location and time) |
| Woofer Size |
6.6875 inches
vs
6.2 inches
|
Larger woofer |
 Height |
961mm
vs
1020mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
606cm2 (205x296mm)
vs
975cm2 (229x426mm)
|
Takes less floor space |
| General |
PSB Imagine X2T |
Dynaudio Emit M30 |
| Brand |
PSB |
Dynaudio |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
20-200 watts |
up to 200 watts |
| Sensitivity |
90 dB |
86 dB |
| Impedance |
8 ohms |
4 ohms |
| Frequency Response |
30-23k Hz |
40-23k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6.2" |
6.6875" |
| Woofer Composition |
Clay/Ceramic/Poly |
Magnesium Silicate Polymer |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1.1" |
| Tweeter Type |
Dome |
n/a |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
5.25" |
No |
| Crossover Frequency |
500Hz and 2200Hz |
n/a |
| Firing Direction |
front |
n/a |
Physical Specs |
|
|
| Height |
1020.0mm (40.2") |
961.0mm (37.8") |
| Width |
229.0mm (9") |
205.0mm (8.1") |
| Depth |
426.0mm (16.8") |
296.0mm (11.7") |
| Weight |
23.60kg (51.9lbs) |
18.18kg (40lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain |
MDF/Lacquer |
| Available Colors |
Black |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years (8 Years registered) |
| Labor Warranty |
5 Years |
5 Years (8 Years registered) |