In this review, we will be comparing Aspen FR10 and Silver 500 7G, two Passive Floor-standing speakers from PS Audio and Monitor Audio.
Let's have a brief look at the main features
of PS Audio Aspen FR10 and Monitor Audio Silver 500 7G first before getting into our more
detailed comparison.
| Key Specs | PS Audio Aspen FR10 | Monitor Audio Silver 500 7G |
|---|
| Design | 3-way | 3-way |
|---|
| Tweeter | 2.5" Planar Magnetic | 1" gold dome C-CAM with Uniform Dispersion (UD) Waveguide II |
|---|
| Midrange | 8" | 3" |
|---|
| Woofer | 2 x 6.5" Composite sandwich | 2 x 8" C-CAM RST II |
|---|
| Frequency response | 32-20k Hz | 27-35k Hz |
|---|
| Sensitivity | 86.5 dB | 90.5 dB |
|---|
| Impedance | 4 ohms | 8 ohms |
|---|
| Power range | 50-200 watts | 80-250 watts |
|---|
| Weight | 34.10kg / 75lbs | 22.53kg / 49.6lbs |
|---|
| Dimensions (H x W x D) | 41-1/2" x 11-3/4" x 16-1/4"
1054.0 x 298.0 x 413.0mm | 42-11/16" x 12-11/16" x 15-7/16"
1085.0 x 323.0 x 393.0mm |
|---|
What size room are the PS Audio Aspen FR10 and Monitor Audio Silver 500 7G speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
PS Audio Aspen FR10 |
Monitor Audio Silver 500 7G |
| Near-field |
Poor |
Bad |
| Small Room |
Average |
Poor |
| Mid-size Room |
Good |
Average |
| Large Room |
Average |
Good |
| Very Large Room |
Poor |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking
through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Aspen FR10 and Silver 500 7G are 3-way speakers.
PS Audio Aspen FR10Monitor Audio Silver 500 7G
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
PS Audio Aspen FR10 |
Monitor Audio Silver 500 7G |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
2.5-inch
|
1-inch
|
|
Midrange
|
1 x 8-inch |
1 x 3-inch |
|
Woofer
|
2 x 6.5-inch
|
2 x 8-inch
|
Aspen FR10 features a 2.5" Teonex planar magnetic Planar Magnetic Tweeter, a 8" Midrange and 2 x 6.5" Composite sandwich Woofer with a Crossover frequency at 550 Hz, 1750 Hz - Linkwitz-Riley 4th order acoustic. On the other hand, the Silver 500 7G features a 1" gold dome C-CAM with Uniform Dispersion (UD) Waveguide II Tweeter, a 3" Midrange and 2 x 8" C-CAM RST II Woofer.
Frequency Response
Aspen FR10 has a frequency range of 32-20k Hz whereas Silver 500 7G has a frequency range of 27-35k Hz. With a minimum frequency of 27Hz, the Silver 500 7G can go significantly deeper on the low side and provide stronger bass compared to the Aspen FR10's min frequency of 32Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Aspen FR10 is a 4 ohms speaker compared to the Silver 500 7G which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Aspen FR10 can provide this impedance level.
These two speakers also have different sensitivity levels. Aspen FR10 sensitivity is rated at 86.5 dB and the Silver 500 7G's is rated at 90.5 dB. This 4 dB difference makes the Monitor Audio Silver 500 7G a more sensitive speaker compared to PS Audio Aspen FR10, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Silver 500 7G can handle a max power of 250 watts RMS, whereas Aspen FR10 has a max power handling value of 200 watts RMS, 50 watts less than the Silver 500 7G.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier — change it to the one you own, or any you are
considering, and watch both numbers move.
Monitor Audio Silver 500 7G
Input Type and Bi-Amping / Bi-Wiring
Silver 500 7G features Binding post posts which make bi-amping or bi-wiring possible. Aspen FR10 has a Binding post which doesn't feature bi-amping/bi-wiring.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare PS Audio Aspen FR10's and Monitor Audio Silver 500 7G's external dimensions. PS Audio Aspen FR10 has external dimensions of 1054.0 x 298.0 x 413.0mm (41-1/2 x 11-3/4 x 16-1/4inch) whereas Monitor Audio Silver 500 7G has external dimensions of 1085.0 x 323.0 x 393.0mm (42-11/16 x 12-11/16 x 15-7/16inch).
PS Audio Aspen FR10 is 25mm narrower and 31mm shorter than Monitor Audio Silver 500 7G but it is also 20mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the PS Audio Aspen FR10 is approximately 1230.7cm2 / 190.8inch2 and base area of the Monitor Audio Silver 500 7G is approximately 1269.4cm2 / 196.8inch2. The Aspen FR10 requires 3% less surface area than the Silver 500 7G which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The PS Audio Aspen FR10 weighs 34.10kg / 75lbs and the Monitor Audio Silver 500 7G weighs 22.53kg / 49.6lbs. This makes the Aspen FR10 51% heavier than the Silver 500 7G.
Here is a comparison of how Aspen FR10 and Silver 500 7G's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
Monitor Audio Silver 500 7G
What's in the Box of Monitor Audio Silver 500 7G?
Here are the items that come with the Silver 500 7G:
- Floorstanding loudspeaker
- Grille
- 4 Outrigger feet
- 4 Rubber feet (pre-installed on outrigger feet)
- 4 Spikes
- 4 Bolts
- 4 Machine screws
- 2 Foam port plugs
- 2 Hex-keys
- Owners Manual
- Important Safety Instructions
 Passive Radiator |
three 6x9" oval rear-firing
vs
None
|
Increases the bass performance |
 Height |
1054mm
vs
1085mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1230cm2
vs
1269cm2
|
Takes less floor space |
 Max Input Power |
250 watts
vs
200 watts
|
Handle more power from your amplifier |
 Sensitivity |
91 dB
vs
87 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
 Woofer Size |
8 inches
vs
6.5 inches
|
Larger woofer |
|
Low Frequency Response |
27 Hz
vs
32 Hz
|
Generates deeper bass |
 High Frequency Response |
35k Hz
vs
20k Hz
|
Generates higher frequency |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Price per pair* |
3200USD
vs
9999USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
PS Audio Aspen FR10 |
Monitor Audio Silver 500 7G |
| Brand |
PS Audio |
Monitor Audio |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
50-200 watts |
80-250 watts |
| Sensitivity |
86.5 dB |
90.5 dB |
| Impedance |
4 ohms |
8 ohms |
| Frequency Response |
32-20k Hz |
27-35k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6.5" |
8" |
| Woofer Composition |
Composite sandwich |
C-CAM RST II |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
2.5" |
1" |
| Tweeter Type |
Planar Magnetic |
gold dome C-CAM with Uniform Dispersion (UD) Waveguide II |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
8" |
3" |
| Crossover Frequency |
550 Hz, 1750 Hz - Linkwitz-Riley 4th order acoustic |
n/a |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
1054.0mm (41.5") |
1085.0mm (42.7") |
| Width |
298.0mm (11.7") |
323.0mm (12.7") |
| Depth |
413.0mm (16.3") |
393.0mm (15.5") |
| Weight |
34.10kg (75lbs) |
22.53kg (49.6lbs) |
| Enclosure |
Passive Radiator |
Bass Reflex |
| Finish |
n/a |
MDF/Wood veneer |
| Available Colors |
n/a |
Oak |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
|
5 Years |
| Labor Warranty |
|
5 Years |
These sit in different price classes - PS Audio Aspen FR10 costs roughly 3.1x what Monitor Audio Silver 500 7G does. Expect it to lead on paper; the question is whether the gap is audible enough in your room to be worth it.
| Area | Better | Why |
|---|
| Bass |
B |
Monitor Audio Silver 500 7G digs deeper - 27Hz against 32Hz. A subwoofer would even that out. |
| Amplifier needs |
B |
Monitor Audio Silver 500 7G is more sensitive (91dB vs 87dB), so it goes louder on the same amplifier. |
| Amplifier match |
B |
Monitor Audio Silver 500 7G is the easier load at 8 ohms; the other is 4 ohms and wants an amplifier rated for it. |
| Headroom |
B |
Monitor Audio Silver 500 7G takes more power (250W vs 200W) - more in hand in a big room. |
| Size |
depends |
Similar cabinet size - neither is easier to fit. |
| Cabinet |
depends |
Passive Radiator vs Ported. |
| Expandability |
B |
Monitor Audio Silver 500 7G: bi-amping. Monitor Audio Silver 500 7G sits in a wider range (8 models), so a matched surround system is easier later. |
| Price |
B |
Monitor Audio Silver 500 7G is cheaper - $3,200 against $9,999, about 68% less; arguably a different class. |
A PS Audio Aspen FR10
B Monitor Audio Silver 500 7G
depends neither is better in the abstract - it turns on your room, placement or how you will use them.
Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Monitor Audio Silver 500 7G is the easier recommendation: it leads on most of the measured areas and costs less. Take PS Audio Aspen FR10 if its size, looks or fit in your room suit you better. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 32Hz anyway, so judge these on the other rows instead. Match it to your room: we rate PS Audio Aspen FR10 the better fit for a small room and a mid-size room, and Monitor Audio Silver 500 7G for a large room and a very large room.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.