In this review, we will be comparing Silver 50 7G and Bronze 2, two Passive Bookshelf speakers by Monitor Audio Let's have a brief look at the main features
of Monitor Audio Silver 50 7G and Monitor Audio Bronze 2 first before getting into our more
detailed comparison.
What size room are the Monitor Audio Silver 50 7G and Monitor Audio Bronze 2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Monitor Audio Silver 50 7G and Monitor Audio Bronze 2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Silver 50 7G and Bronze 2 are 2-way speakers.
| Driver |
Monitor Audio Silver 50 7G |
Monitor Audio Bronze 2 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.25-inch
|
1 x 6.5-inch
|
Silver 50 7G features a 1" Hard-Dome Tweeter and 1 x 5.25" C-CAM RST II Woofer . On the other hand, the Bronze 2 features a 1" Dome Tweeter and 1 x 6.5" C-CAM Woofer with a Crossover frequency at 3100Hz.
Frequency Response
Silver 50 7G has a frequency range of 47-35k Hz whereas Bronze 2 has a frequency range of 42-30k Hz. With a minimum frequency of 42Hz, the Bronze 2 can go significantly deeper on the low side and provide stronger bass compared to the Silver 50 7G's min frequency of 47Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
Monitor Audio Silver 50 7G
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Silver 50 7G and Bronze 2 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Silver 50 7G sensitivity is rated at 86 dB and the Bronze 2's is at 90 dB. This 4 dB difference makes the Monitor Audio Bronze 2 a more sensitive speaker compared to Monitor Audio Silver 50 7G, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Silver 50 7G and Bronze 2 features dual binding post speaker terminals for bi-amping or bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Silver 50 7G's and Monitor Audio Bronze 2's external dimensions. Monitor Audio Silver 50 7G has external dimensions of 283.0 x 167.0 x 274.0mm ( 11-1/8 x 6-9/16 x 10-3/4inch) whereas Monitor Audio Bronze 2 has external dimensions of 350.0 x 185.0 x 281.0mm ( 13.7 x 7.2 x 11.0inch) .
Monitor Audio Bronze 2 is clearly the larger of the two speakers. Its body is 18mm wider, 67mm taller and 7mm deeper than Monitor Audio Silver 50 7G.
Below you can see the front view size comparison of Monitor Audio Silver 50 7G and Monitor Audio Bronze 2 in scale.
Comparison image of Monitor Audio Silver 50 7G and Monitor Audio Bronze 2 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Silver 50 7G is approximately 457.6cm2 / 70.9inch2 and base area of the Monitor Audio Bronze 2 is approximately 519.9cm2 / 80.6inch2. The Silver 50 7G requires 12% less surface area than the Bronze 2 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Monitor Audio Silver 50 7G and Monitor Audio Bronze 2 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Monitor Audio Silver 50 7G weighs 5.63kg / 12.4lbs and the Monitor Audio Bronze 2 weighs 5.30kg / 11.7lbs. This makes the Silver 50 7G 6% heavier than the Bronze 2.
Here is a comparison of how Silver 50 7G and Bronze 2's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
Monitor Audio Silver 50 7G
What's in the Box of Monitor Audio Silver 50 7G?
Here are the items that are included inside the box of Silver 50 7G:
2 Bookshelf loudspeakers2 Grilles4 Jumpers (pre-installed)8 Rubber feet2 Foam port plugsHex-keyOwners ManualImportant Safety Instructions
What's in the Box of Monitor Audio Bronze 2?
Here are the items that come with the Bronze 2:
2 Bookshelf loudspeakers 2 Grilles 2 Foam port plugs Hex-key Owner's Manual Important Safety Instructions
 High Frequency Response |
35k Hz
vs
30k Hz
|
Generates higher frequency |
 Height |
283mm
vs
350mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
457cm2 (167x274mm)
vs
519cm2 (185x281mm)
|
Takes less floor space |
 Sensitivity |
90 dB
vs
86 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
| Low Frequency Response |
42 Hz
vs
47 Hz
|
Generates deeper bass |
| General |
Monitor Audio Silver 50 7G |
Monitor Audio Bronze 2 |
| Brand |
Monitor Audio |
Monitor Audio |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
40-100 watts |
30-100 watts |
| Sensitivity |
86 dB |
90 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
47-35k Hz |
42-30k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5.25" |
6.5" |
| Woofer Composition |
C-CAM RST II |
C-CAM |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Hard-Dome |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
3100Hz |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
283.0mm (11.1") |
350.0mm (13.8") |
| Width |
167.0mm (6.6") |
185.0mm (7.3") |
| Depth |
274.0mm (10.8") |
281.0mm (11.1") |
| Weight |
5.63kg (12.4lbs) |
5.30kg (11.7lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood veneer |
MDF/Wood-grain vinyl |
| Available Colors |
Ash,High Gloss Black,Black Oak,Satin White |
Walnut, White, Rosemah, Black |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
24-28" |
30-31" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |