In this review, we will be comparing Silver 50 7G and BW 606, two Passive Bookshelf speakers from Monitor Audio and Bowers Wilkins. Let's have a brief look at the main features
of Monitor Audio Silver 50 7G and B&W 606 first before getting into our more
detailed comparison.
What size room are the Monitor Audio Silver 50 7G and B&W 606 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Monitor Audio Silver 50 7G and B&W 606 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Silver 50 7G and BW 606 are 2-way speakers.
| Driver |
Monitor Audio Silver 50 7G |
B&W 606 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.25-inch
|
1 x 6.5-inch
|
Silver 50 7G features a 1" Hard-Dome Tweeter and 1 x 5.25" C-CAM RST II Woofer . On the other hand, the BW 606 features a 1" Decoupled Carbon Hard-Dome Tweeter and 1 x 6.5" Continuum Woofer .
Frequency Response
Silver 50 7G has a frequency range of 47-35k Hz whereas BW 606 has a frequency range of 52-28k Hz. With a minimum frequency of 47Hz, the Silver 50 7G can go significantly deeper on the low side and provide stronger bass compared to the BW 606's min frequency of 52Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
Monitor Audio Silver 50 7G
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Silver 50 7G and BW 606 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Silver 50 7G sensitivity is rated at 86 dB and the BW 606's is at 88 dB. This 2 dB difference makes the B&W 606 a more sensitive speaker compared to Monitor Audio Silver 50 7G, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Silver 50 7G can handle a max power of 120 watts RMS from the amp the whereas Silver 50 7G has a max power handling value of 100 watts RMS , 20 watts less than the BW 606.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Silver 50 7G and BW 606 features dual binding post speaker terminals for bi-amping or bi-wiring.
B&W 606's Post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Silver 50 7G's and B&W 606's external dimensions. Monitor Audio Silver 50 7G has external dimensions of 283.0 x 167.0 x 274.0mm ( 11-1/8 x 6-9/16 x 10-3/4inch) whereas B&W 606 has external dimensions of 345.0 x 190.0 x 324.0mm ( 13.5 x 7.4 x 12.7inch) .
B&W 606 is clearly the larger of the two speakers. Its body is 23mm wider, 62mm taller and 50mm deeper than Monitor Audio Silver 50 7G.
Below you can see the front view size comparison of Monitor Audio Silver 50 7G and B&W 606 in scale.
Comparison image of Monitor Audio Silver 50 7G and B&W 606 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Silver 50 7G is approximately 457.6cm2 / 70.9inch2 and base area of the B&W 606 is approximately 615.6cm2 / 95.4inch2. The Silver 50 7G requires 26% less surface area than the BW 606 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Monitor Audio Silver 50 7G and B&W 606 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Monitor Audio Silver 50 7G weighs 5.63kg / 12.4lbs and the B&W 606 weighs 6.90kg / 15.2lbs. This makes the BW 606 23% heavier than the Silver 50 7G.
Here is a comparison of how Silver 50 7G and BW 606's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
Monitor Audio Silver 50 7G
What's in the Box of Monitor Audio Silver 50 7G?
Here are the items that are included inside the box of Silver 50 7G:
2 Bookshelf loudspeakers2 Grilles4 Jumpers (pre-installed)8 Rubber feet2 Foam port plugsHex-keyOwners ManualImportant Safety Instructions
What's in the Box of B&W 606?
Here are the items that come with the BW 606:
2 Bookshelf loudspeakers2 Grilles2 Two-piece foam port plugs8 Self-adhesive rubber feet4 Jumper-straps (pre-installed)ManualBowers & Wilkins brochureWarranty Information
 Low Frequency Response |
47 Hz
vs
52 Hz
|
Generates deeper bass |
 High Frequency Response |
35k Hz
vs
28k Hz
|
Generates higher frequency |
 Height |
283mm
vs
345mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
457cm2 (167x274mm)
vs
615cm2 (190x324mm)
|
Takes less floor space |
 Max Input Power |
120 watts
vs
100 watts
|
Handle more power from your amplifier |
 Sensitivity |
88 dB
vs
86 dB
|
Play louder with same amount of amplification power |
| Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
 Price per pair* |
899USD
vs
1100USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Monitor Audio Silver 50 7G |
Bowers & Wilkins 606 |
| Brand |
Monitor Audio |
Bowers Wilkins |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
40-100 watts |
30-120 watts |
| Sensitivity |
86 dB |
88 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
n/a |
3.7 ohms |
| Frequency Response |
47-35k Hz |
52-28k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5.25" |
6.5" |
| Woofer Composition |
C-CAM RST II |
Continuum |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Hard-Dome |
Hard-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
rear |
| Suggested Break-in Period |
n/a |
allow up to a week for the temperature effects to stabilise and 15 hours of average use for the parts to attain their intended design characteristics. |
Physical Specs |
|
|
| Height |
283.0mm (11.1") |
345.0mm (13.6") |
| Width |
167.0mm (6.6") |
190.0mm (7.5") |
| Depth |
274.0mm (10.8") |
324.0mm (12.8") |
| Weight |
5.63kg (12.4lbs) |
6.90kg (15.2lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood veneer |
MDF/Vinyl |
| Available Colors |
Ash,High Gloss Black,Black Oak,Satin White |
Black, White, Oak |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
24-28" |
24-26" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |