In this review, we will be comparing Platinum 300 3G and Reference 5 Meta, two Passive Floor-standing speakers from Monitor Audio and KEF. Let's have a brief look at the main features
of Monitor Audio Platinum 300 3G and KEF Reference 5 Meta first before getting into our more
detailed comparison.
What size room are the Monitor Audio Platinum 300 3G and KEF Reference 5 Meta speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Monitor Audio Platinum 300 3G and KEF Reference 5 Meta compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Platinum 300 3G and Reference 5 Meta are 3-way speakers.
| Driver |
Monitor Audio Platinum 300 3G |
KEF Reference 5 Meta |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 4-inch |
1 x 5-inch |
|
Woofer
|
2 x 8-inch
|
4 x 6.5-inch
|
Platinum 300 3G features a 1" MPD III Tweeter , a 4" Midrange and 2 x 8" RDT III Woofer with a Crossover frequency at 650 Hz - 3000 Hz. On the other hand, the Reference 5 Meta features a 1" aluminium dome with MAT Tweeter , a 5" Midrange and 4 x 6.5" aluminium cone Woofer with a Crossover frequency at 450Hz and 2100Hz.
Frequency Response
Platinum 300 3G has a frequency range of 17-60k Hz whereas Reference 5 Meta has a frequency range of 40-35k Hz. With a minimum frequency of 17Hz, the Platinum 300 3G can go significantly deeper on the low side and provide stronger bass compared to the Reference 5 Meta's min frequency of 40Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Monitor Audio Platinum 300 3G
Impedance and Sensitivity
Platinum 300 3G and Reference 5 Meta have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Platinum 300 3G sensitivity is rated at 88dB and the Reference 5 Meta's is at 88 dB.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Platinum 300 3G and the Platinum 300 3G can provide this impedance level.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Platinum 300 3G and Reference 5 Meta features dual binding post speaker terminals for bi-amping or bi-wiring.
Monitor Audio Platinum 300 3G's Binding post terminals allows Bi-amping or bi-wiring
KEF Reference 5 Meta's Custom 5-way bi-wire tool-less binding posts terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both Platinum 300 3G and Reference 5 Meta have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Monitor Audio Platinum 300 3G Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Platinum 300 3G's and KEF Reference 5 Meta's external dimensions. Monitor Audio Platinum 300 3G has external dimensions of 1131.1 x 429.8 x 525 mm ( 44.5 x 16.9 x 20.6-inch) whereas KEF Reference 5 Meta has external dimensions of 1402 x 323 x 467 mm ( 55.2 x 12.7 x 18.4 in.) .
KEF Reference 5 Meta is 107mm narrower and 58mm less deeper than Monitor Audio Platinum 300 3G but it is also 271mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Platinum 300 3G is approximately 2257.5cm2 / 349.9inch2 and base area of the KEF Reference 5 Meta is approximately 1508.4cm2 / 233.8inch2. The Platinum 300 3G requires 50% more surface area than the Reference 5 Meta which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Monitor Audio Platinum 300 3G weighs 53.60kg / 117.9lbs and the KEF Reference 5 Meta weighs 60.20kg / 132.4lbs. This makes the Reference 5 Meta 12% heavier than the Platinum 300 3G.
Here is a comparison of how Platinum 300 3G and Reference 5 Meta's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
Monitor Audio Platinum 300 3G
 Minimum Impedance |
4 ohms
vs
3.2 ohms
|
Very low impedance levels puts more pressure on amplifier |
 Woofer Size |
8 inches
vs
6.5 inches
|
Larger woofer |
| Low Frequency Response |
17 Hz
vs
40 Hz
|
Generates deeper bass |
 High Frequency Response |
60k Hz
vs
35k Hz
|
Generates higher frequency |
 Height |
1131mm
vs
1402mm
|
Easier to fit in smaller spaces |
 Price per pair* |
17900USD
vs
22000USD
|
costs less (*prices may change depending on the seller, location and time) |
| Number of Woofers |
4
vs
2
|
More woofers |
 Base Surface Area |
1508cm2 (323x467mm)
vs
2257cm2 (430x525mm)
|
Takes less floor space |
| General |
Monitor Audio Platinum 300 3G |
KEF Reference 5 Meta |
| Brand |
Monitor Audio |
KEF |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 400 watts |
50-400 watts |
| Sensitivity |
88dB |
88 dB |
| Impedance |
4 ohms |
4 ohms |
| Impedance |
4 ohms |
3.2 ohms |
| Frequency Response |
17-60k Hz |
40-35k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
4 |
| Woofer Size |
8" |
6.5" |
| Woofer Composition |
RDT III |
aluminium cone |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
n/a |
aluminium dome with MAT |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
4" |
5" |
| Crossover Frequency |
650 Hz - 3000 Hz |
450Hz and 2100Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
1131.0mm (44.5") |
1402.0mm (55.2") |
| Width |
430.0mm (16.9") |
323.0mm (12.7") |
| Depth |
525.0mm (20.7") |
467.0mm (18.4") |
| Weight |
53.60kg (117.9lbs) |
60.20kg (132.4lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Available Colors |
Piano Black, Piano Ebony, Satin White |
High-Gloss White/Blue, High-Gloss White/Champagne, High-Gloss Black/Grey, High-Gloss Black/Copper, Satin Walnut/Silver |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
|
5 years |
| Labor Warranty |
|
5 years |