In this review, we will be comparing Gold 300 6G and Silver 500 7G, two Passive Floor-standing speakers by Monitor Audio
Let's have a brief look at the main features
of Monitor Audio Gold 300 6G and Monitor Audio Silver 500 7G first before getting into our more
detailed comparison.
Monitor Audio Gold 300 6G Key Specs
- 3-way Design
- 1" Tweeter
- 3" Midrange
- 2 x 6" HDT C-CAM Woofer
- 45 Hz – 60 kHz Frequency Response
- 87 dB Sensitivity
- Impedance: 4ohms
- Power Range:up to 250watts
- Weight:21.25kg
- Dimensions (H x W x D): 1099.0" x 13-3/8" x 18-1/4"( 340.0 x 1099.0 x 464.0mm )
Monitor Audio Silver 500 7G Key Specs
- 3-way Design
- 1" gold dome C-CAM with Uniform Dispersion (UD) Waveguide II Tweeter
- 3" Midrange
- 2 x 8" C-CAM RST II Woofer
- 3" Midrange
- 27-35k Hz Frequency Response
- 90.5 dB Sensitivity
- Impedance: 8ohms
- Power Range:80-250watts
- Weight:22.53kg
- Dimensions (H x W x D): 1085.0" x 12-11/16" x 15-7/16"( 1085.0 x 323.0 x 393.0mm )
What size room are the Monitor Audio Gold 300 6G and Monitor Audio Silver 500 7G speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Monitor Audio Gold 300 6G |
Monitor Audio Silver 500 7G |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Monitor Audio Gold 300 6G and Monitor Audio Silver 500 7G compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Gold 300 6G and Silver 500 7G are 3-way speakers.
| Driver |
Monitor Audio Gold 300 6G |
Monitor Audio Silver 500 7G |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 3-inch |
1 x 3-inch |
|
Woofer
|
2 x 6-inch
|
2 x 8-inch
|
Gold 300 6G features a 1" MPD III Tweeter , a 3" Midrange and 2 x 6" HDT C-CAM Woofer with a Crossover frequency at 800 Hz - 2700 Hz. On the other hand, the Silver 500 7G features a 1" gold dome C-CAM with Uniform Dispersion (UD) Waveguide II Tweeter , a 3" Midrange and 2 x 8" C-CAM RST II Woofer .
Frequency Response
Gold 300 6G has a frequency range of 45 Hz – 60 kHz whereas Silver 500 7G has a frequency range of 27-35k Hz. With a minimum frequency of 27Hz, the Silver 500 7G can go significantly deeper on the low side and provide stronger bass compared to the Gold 300 6G's min frequency of 45Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Monitor Audio Gold 300 6G
Monitor Audio Silver 500 7G
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Gold 300 6G is a 4 ohms speaker compared to the Silver 500 7G which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Gold 300 6G can provide this impedance level.
These two speakers also have different sensitivity levels. Gold 300 6G sensitivity is rated at 87 dB and the Silver 500 7G's is rated at 90.5 dB. This 4 dB difference makes the Monitor Audio Silver 500 7G a more sensitive speaker compared to Monitor Audio Gold 300 6G, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Gold 300 6G and Silver 500 7G features dual binding post speaker terminals for bi-amping or bi-wiring.
Monitor Audio Gold 300 6G's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Gold 300 6G's and Monitor Audio Silver 500 7G's external dimensions. Monitor Audio Gold 300 6G has external dimensions of 340.0 x 1099.0 x 464.0mm ( 13-3/8 x 43-1/4 x 18-1/4) whereas Monitor Audio Silver 500 7G has external dimensions of 1085.0 x 323.0 x 393.0mm ( 42-11/16 x 12-11/16 x 15-7/16inch) .
Monitor Audio Gold 300 6G is clearly the larger of the two speakers. Its body is 17mm wider, 14mm taller and 71mm deeper than Monitor Audio Silver 500 7G.
Below you can see the front view size comparison of Monitor Audio Gold 300 6G and Monitor Audio Silver 500 7G in scale.
Comparison image of Monitor Audio Gold 300 6G and Monitor Audio Silver 500 7G Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Gold 300 6G is approximately 5099.4cm2 / 790.4inch2 and base area of the Monitor Audio Silver 500 7G is approximately 1269.4cm2 / 196.8inch2. The Gold 300 6G requires 302% more surface area than the Silver 500 7G which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Monitor Audio Gold 300 6G weighs 21.25kg / 46.8lbs and the Monitor Audio Silver 500 7G weighs 22.53kg / 49.6lbs. This makes the Silver 500 7G 6% heavier than the Gold 300 6G.
Here is a comparison of how Gold 300 6G and Silver 500 7G's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
Monitor Audio Gold 300 6G
Monitor Audio Silver 500 7G
What's in the Box of Monitor Audio Gold 300 6G?
Here are the items that are included inside the box of Gold 300 6G:
2 Floorstanding loudspeakers 6 Grilles 4 Jumper-plates (pre-installed) 4 Port plugs 2 Base plates 8 Outrigger feet 8 rubber feet (pre-installed in outrigger feet) 8 Spikes (pre-installed in outrigger fee) 8 Large machine screws 24 Small machine screws Hex-key Quick Setup Guide Important Safety Instructions
What's in the Box of Monitor Audio Silver 500 7G?
Here are the items that come with the Silver 500 7G:
Floorstanding loudspeakerGrille4 Outrigger feet4 Rubber feet (pre-installed on outrigger feet)4 Spikes4 Bolts4 Machine screws2 Foam port plugs2 Hex-keysOwners ManualImportant Safety Instructions
 High Frequency Response |
60k Hz
vs
35k Hz
|
Generates higher frequency |
 Sensitivity |
91 dB
vs
87 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
 Woofer Size |
8 inches
vs
6 inches
|
Larger woofer |
|
Low Frequency Response |
27 Hz
vs
45 Hz
|
Generates deeper bass |
 Height |
1085mm
vs
1099mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1269cm2
vs
5099cm2
|
Takes less floor space |
 Price per pair* |
3200USD
vs
5599USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Monitor Audio Gold 300 6G |
Monitor Audio Silver 500 7G |
| Brand |
Monitor Audio |
Monitor Audio |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 250 watts |
80-250 watts |
| Sensitivity |
87 dB |
90.5 dB |
| Impedance |
4 ohms |
8 ohms |
| Impedance |
3.9 ohms |
n/a |
| Frequency Response |
45 Hz – 60 kHz |
27-35k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6" |
8" |
| Woofer Composition |
HDT C-CAM |
C-CAM RST II |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
n/a |
gold dome C-CAM with Uniform Dispersion (UD) Waveguide II |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
3" |
3" |
| Crossover Frequency |
800 Hz - 2700 Hz |
n/a |
| Firing Direction |
n/a |
rear |
| Suggested Break-in Period |
2 Base plates| 8 Outrigger feet| 8 rubber feet (pre-installed in outrigger feet)| 8 Spikes |
n/a |
Physical Specs |
|
|
| Height |
1099.0mm (43.3") |
1085.0mm (42.7") |
| Width |
340.0mm (13.4") |
323.0mm (12.7") |
| Depth |
464.0mm (18.3") |
393.0mm (15.5") |
| Weight |
21.25kg (46.8lbs) |
22.53kg (49.6lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF/Wood veneer |
| Available Colors |
Macassar Wood Veneer, High-Gloss Black, Satin White |
Oak |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |