In this review, we will be comparing Bronze 500 and DFR52, two Passive Floor-standing speakers from Monitor Audio and ELAC. Let's have a brief look at the main features
of Monitor Audio Bronze 500 and ELAC Debut Ref DFR52 first before getting into our more
detailed comparison.
What size room are the Monitor Audio Bronze 500 and ELAC Debut Ref DFR52 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Monitor Audio Bronze 500 and ELAC Debut Ref DFR52 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Bronze 500 is a 2-way design whereas the DFR52 is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Monitor Audio Bronze 500 |
ELAC Debut Ref DFR52 |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 5.25-inch |
|
Woofer
|
2 x 8-inch
|
2 x 5.25-inch
|
Bronze 500 features a 1" gold dome C-CAM with uniform dispersion (UD) waveguide Tweeter and 2 x 8" C-CAM Woofer . On the other hand, the DFR52 features a 1" cloth dome Tweeter , a 5.25" Midrange and 2 x 5.25" Aramid fiber Woofer .
Frequency Response
Bronze 500 has a frequency range of 32-30k Hz whereas DFR52 has a frequency range of 42-35k Hz. With a minimum frequency of 32Hz, the Bronze 500 can go significantly deeper on the low side and provide stronger bass compared to the DFR52's min frequency of 42Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Bronze 500 is a 8 ohms speaker compared to the DFR52 which has a nominal impedance of 6 ohms.
These two speakers also have different sensitivity levels. Bronze 500 sensitivity is rated at 90 dB and the DFR52's is rated at 87 dB. This 3 dB difference makes the Monitor Audio Bronze 500 a more sensitive speaker compared to ELAC Debut Ref DFR52, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Bronze 500 can handle a max power of 200 watts RMS from the amp the whereas DFR52 has a max power handling value of 140 watts RMS, 60 watts less than the Bronze 500.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Bronze 500 features Binding post posts which make bi-amping or bi-wiring possible. DFR52 has a 5-Way post which doesn't feature bi-amping/bi-wiring.
ELAC Debut Ref DFR52's 5-Way post terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Bronze 500's and ELAC Debut Ref DFR52's external dimensions. Monitor Audio Bronze 500 has external dimensions of 977.0 x 294.0 x 366.0mm ( 38-7/16 x 11-9/16 x 14-3/8inch) whereas ELAC Debut Ref DFR52 has external dimensions of 1031.0 x 232.0 x 283.0mm ( 40-9/16 x 9-1/8 x 11-1/8inch) .
ELAC Debut Ref DFR52 is 62mm narrower and 83mm less deeper than Monitor Audio Bronze 500 but it is also 54mm taller.
Below you can see the front view size comparison of Monitor Audio Bronze 500 and ELAC Debut Ref DFR52 in scale.
Comparison image of Monitor Audio Bronze 500 and ELAC Debut Ref DFR52 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Bronze 500 is approximately 1076.0cm2 / 166.8inch2 and base area of the ELAC Debut Ref DFR52 is approximately 656.6cm2 / 101.8inch2. The Bronze 500 requires 64% more surface area than the DFR52 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Monitor Audio Bronze 500 weighs 18.05kg / 39.7lbs and the ELAC Debut Ref DFR52 weighs 16.77kg / 36.9lbs. This makes the Bronze 500 8% heavier than the DFR52.
Here is a comparison of how Bronze 500 and DFR52's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Monitor Audio Bronze 500?
Here are the items that are included inside the box of Bronze 500:
Floorstanding loudspeakerGrille4 Outrigger feet (w/ 4 adjustment dials and locking-nuts)4 Spikes (pre-installed on outrigger feet)4 Rubber feet4 Large course-thread screws4 Small machine screws2 Terminal-jumpers (pre-installed)2 Foam port plugsHex-keyQuick Start GuideImportant Safety Instructions
What's in the Box of ELAC Debut Ref DFR52?
Here are the items that come with the DFR52:
Floorstanding loudspeakerGrille4 Outrigger feet (spikes installed)4 Rubber feet4 Dials8 ScrewsHex-key
 Max Input Power |
200 watts
vs
140 watts
|
Handle more power from your amplifier |
 Sensitivity |
90 dB
vs
87 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
 Woofer Size |
8 inches
vs
5.25 inches
|
Larger woofer |
| Low Frequency Response |
32 Hz
vs
42 Hz
|
Generates deeper bass |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Dolby Atmos Drivers |
Optional
vs
No
|
Dolby Atmos Compatibility |
 Height |
977mm
vs
1031mm
|
Easier to fit in smaller spaces |
 Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
 High Frequency Response |
35k Hz
vs
30k Hz
|
Generates higher frequency |
 Base Surface Area |
656cm2 (232x283mm)
vs
1076cm2 (294x366mm)
|
Takes less floor space |
 Price per pair* |
1400USD
vs
1496USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Monitor Audio Bronze 500 |
ELAC Debut Reference DFR52 |
| Brand |
Monitor Audio |
ELAC |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
60-200 watts |
up to 140 watts |
| Sensitivity |
90 dB |
87 dB |
| Impedance |
8 ohms |
6 ohms |
| Frequency Response |
32-30k Hz |
42-35k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
8" |
5.25" |
| Woofer Composition |
C-CAM |
Aramid fiber |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
gold dome C-CAM with uniform dispersion (UD) waveguide |
dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
5.25" |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
977.0mm (38.5") |
1031.0mm (40.6") |
| Width |
294.0mm (11.6") |
232.0mm (9.1") |
| Depth |
366.0mm (14.4") |
283.0mm (11.1") |
| Weight |
18.05kg (39.7lbs) |
16.77kg (36.9lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Black |
White Baffle / Oak Cabinet or Black Baffle / Walnut Cabinet |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
No |
Other |
|
|
| Parts Warranty |
5 Years |
3 Years |
| Labor Warranty |
5 Years |
3 Years |