In this review, we will be comparing Monitor Audio Bronze 300 7G and RP-280F, two Passive Floor-standing speakers from Monitor and Klipsch.
Let's have a brief look at the main features
of Monitor Audio Bronze 300 7G and Klipsch RP-280F first before getting into our more
detailed comparison.
Monitor Audio Bronze 300 7G Key Specs
- 1" Hard-Dome Tweeter
- 2 x 6" C-CAM Woofer
- 34-30k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 8ohms
- Power Range:40-150watts
- Weight:15.63kg
- Dimensions (H x W x D): 1010.0" x 10-5/8" x 15-7/16"( 1010.0 x 270.0 x 393.0mm )
Klipsch RP-280F Key Specs
- 2-way Design
- 1" Tractrix Horn Tweeter
- 2 x 8" Cerametallic Woofer
- 32-25k Hz Frequency Response
- 98 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 150watts
- Weight:28.41kg
- Dimensions (H x W x D): 1094.0" x 10-9/16" x 17-3/8"( 1094.0 x 269.0 x 442.0mm )
In the following sections, we will get into more detail in order to better understand how the Monitor Audio Bronze 300 7G and Klipsch RP-280F compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Monitor Audio Bronze 300 7G is a -way design whereas the RP-280F is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Monitor Audio Bronze 300 7G |
Klipsch RP-280F |
|
Driver Setup
|
-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 6-inch
|
2 x 8-inch
|
Monitor Audio Bronze 300 7G features a 1" Hard-Dome Tweeter and 2 x 6" C-CAM Woofer . On the other hand, the RP-280F features a 1" Tractrix Horn Tweeter and 2 x 8" Cerametallic Woofer .
Frequency Response
Monitor Audio Bronze 300 7G has a frequency range of 34-30k Hz whereas RP-280F has a frequency range of 32-25k Hz. With a minimum frequency of 32Hz, the RP-280F can go slightly deeper then the Monitor Audio Bronze 300 7G's min frequency of 34Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Monitor Audio Bronze 300 7G
High Frequency
Floor-standing Speakers
Monitor Audio Bronze 300 7G
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Monitor Audio Bronze 300 7G and RP-280F have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Monitor Audio Bronze 300 7G sensitivity is rated at 88 dB and the RP-280F's is at 98 dB. This 10 dB difference makes the Klipsch RP-280F a more sensitive speaker compared to Monitor Audio Bronze 300 7G, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Monitor Audio Bronze 300 7G
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Monitor Audio Bronze 300 7G and RP-280F features dual binding post speaker terminals for bi-amping or bi-wiring.
Klipsch RP-280F's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Bronze 300 7G's and Klipsch RP-280F's external dimensions. Monitor Audio Bronze 300 7G has external dimensions of 1010.0 x 270.0 x 393.0mm ( 39-3/4inch x 10-5/8inch x 15-7/16inch ) whereas Klipsch RP-280F has external dimensions of 1094.0 x 269.0 x 442.0mm ( 43-1/16 x 10-9/16 x 17-3/8inch) .
Monitor Audio Bronze 300 7G is 84mm shorter and 49mm less deeper than Klipsch RP-280F but it is also 1mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Bronze 300 7G is approximately 1061.1cm2 / 164.5inch2 and base area of the Klipsch RP-280F is approximately 1189.0cm2 / 184.3inch2. The Monitor Audio Bronze 300 7G requires 11% less surface area than the RP-280F which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Monitor Audio Bronze 300 7G weighs 15.63kg / 34.4lbs and the Klipsch RP-280F weighs 28.41kg / 62.5lbs. This makes the RP-280F 82% heavier than the Monitor Audio Bronze 300 7G.
Here is a comparison of how Monitor Audio Bronze 300 7G and RP-280F's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
Monitor Audio Bronze 300 7G
What's in the Box of Monitor Audio Bronze 300 7G?
Here are the items that are included inside the box of Monitor Audio Bronze 300 7G:
2 Floorstanding loudspeakers 2 Grilles 8 Outrigger feet 8 Spikes Eight M10x25mm hex-screws Eight M4x15mm hex-screws 4 Terminal-jumpers (pre-installed)4 Foam port plugs Quick Start Guide Important Safety
What's in the Box of Klipsch RP-280F?
Here are the items that come with the RP-280F:
Floorstanding loudspeaker (Ebony)Speaker baseDetachable magnetic grilleFour 1-inch #6 Wood screws4 Spike feet6 Rubber feetUser ManualWarranty InformationImportant Safety Instructions
 High Frequency Response |
30k Hz
vs
25k Hz
|
Generates higher frequency |
 Height |
1010mm
vs
1094mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1061cm2
vs
1189cm2
|
Takes less floor space |
 Driver Setup |
2-way
vs
-way
|
Have a dedicated mid-range driver |
 Sensitivity |
98 dB
vs
88 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
8 inches
vs
6 inches
|
Larger woofer |
|
Low Frequency Response |
32 Hz
vs
34 Hz
|
Generates deeper bass |
 Price per pair* |
1198USD
vs
1249USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Monitor Audio Bronze 300 7G |
Klipsch Reference Premiere RP-280F |
| Brand |
Monitor |
Klipsch |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
40-150 watts |
up to 150 watts |
| Sensitivity |
88 dB |
98 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
34-30k Hz |
32-25k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6" |
8" |
| Woofer Composition |
C-CAM |
Cerametallic |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Hard-Dome |
Tractrix Horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
N/A" |
No |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
1010.0mm (39.8") |
1094.0mm (43.1") |
| Width |
270.0mm (10.6") |
269.0mm (10.6") |
| Depth |
393.0mm (15.5") |
442.0mm (17.4") |
| Weight |
15.63kg (34.4lbs) |
28.41kg (62.5lbs) |
| Enclosure |
|
Bass Reflex |
| Finish |
MDF/Vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Black |
Walnut, Black |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |