In this review, we will be comparing Monitor Audio Bronze 300 7G and Concord, two Passive Floor-standing speakers from Monitor and KLH.
Let's have a brief look at the main features
of Monitor Audio Bronze 300 7G and KLH Concord first before getting into our more
detailed comparison.
Monitor Audio Bronze 300 7G Key Specs
- 1" Hard-Dome Tweeter
- 2 x 6" C-CAM Woofer
- 34-30k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 8ohms
- Power Range:40-150watts
- Weight:15.63kg
- Dimensions (H x W x D): 1010.0" x 10-5/8" x 15-7/16"( 1010.0 x 270.0 x 393.0mm )
KLH Concord Key Specs
- 2-way Design
- 1" Tweeter
- 2 x 6.5" Kevlar Woofer
- 28-23k Hz Frequency Response
- 94 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 225watts
- Weight:20.45kg
- Dimensions (H x W x D): 1026.0" x 8-5/16" x 14-15/16"( 1026.0 x 212.0 x 380.0mm )
In the following sections, we will get into more detail in order to better understand how the Monitor Audio Bronze 300 7G and KLH Concord compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Monitor Audio Bronze 300 7G is a -way design whereas the Concord is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Monitor Audio Bronze 300 7G |
KLH Concord |
|
Driver Setup
|
-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 6-inch
|
2 x 6.5-inch
|
Monitor Audio Bronze 300 7G features a 1" Hard-Dome Tweeter and 2 x 6" C-CAM Woofer . On the other hand, the Concord features a 1" anodized aluminum Tweeter and 2 x 6.5" Kevlar Woofer .
Frequency Response
Monitor Audio Bronze 300 7G has a frequency range of 34-30k Hz whereas Concord has a frequency range of 28-23k Hz. With a minimum frequency of 28Hz, the Concord can go significantly deeper on the low side and provide stronger bass compared to the Monitor Audio Bronze 300 7G's min frequency of 34Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Monitor Audio Bronze 300 7G
High Frequency
Floor-standing Speakers
Monitor Audio Bronze 300 7G
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Monitor Audio Bronze 300 7G and Concord have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Monitor Audio Bronze 300 7G sensitivity is rated at 88 dB and the Concord's is at 94 dB. This 6 dB difference makes the KLH Concord a more sensitive speaker compared to Monitor Audio Bronze 300 7G, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Monitor Audio Bronze 300 7G
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Monitor Audio Bronze 300 7G can handle a max power of 150 watts RMS from the amp the whereas Concord has a max power handling value of watts RMS, 150 watts less than the Monitor Audio Bronze 300 7G.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Monitor Audio Bronze 300 7G features Binding Post posts which make bi-amping or bi-wiring possible. Concord has a 5-Way post which doesn't feature bi-amping/bi-wiring.
KLH Concord's 5-Way post terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Bronze 300 7G's and KLH Concord's external dimensions. Monitor Audio Bronze 300 7G has external dimensions of 1010.0 x 270.0 x 393.0mm ( 39-3/4inch x 10-5/8inch x 15-7/16inch ) whereas KLH Concord has external dimensions of 1026.0 x 212.0 x 380.0mm ( 40-3/8 x 8-5/16 x 14-15/16inch) .
KLH Concord is 58mm narrower and 13mm less deeper than Monitor Audio Bronze 300 7G but it is also 16mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Bronze 300 7G is approximately 1061.1cm2 / 164.5inch2 and base area of the KLH Concord is approximately 805.6cm2 / 124.9inch2. The Monitor Audio Bronze 300 7G requires 32% more surface area than the Concord which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Monitor Audio Bronze 300 7G weighs 15.63kg / 34.4lbs and the KLH Concord weighs 20.45kg / 45lbs. This makes the Concord 31% heavier than the Monitor Audio Bronze 300 7G.
Here is a comparison of how Monitor Audio Bronze 300 7G and Concord's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
Monitor Audio Bronze 300 7G
What's in the Box of Monitor Audio Bronze 300 7G?
Here are the items that are included inside the box of Monitor Audio Bronze 300 7G:
2 Floorstanding loudspeakers 2 Grilles 8 Outrigger feet 8 Spikes Eight M10x25mm hex-screws Eight M4x15mm hex-screws 4 Terminal-jumpers (pre-installed)4 Foam port plugs Quick Start Guide Important Safety
What's in the Box of KLH Concord?
Here are the items that come with the Concord:
Floorstanding loudspeakerGrille4 Spike feet (w/ locking nut attached)4 Protective discs4 Rubber feetPort plugManualATTENTION! note
 High Frequency Response |
30k Hz
vs
23k Hz
|
Generates higher frequency |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Height |
1010mm
vs
1026mm
|
Easier to fit in smaller spaces |
 Driver Setup |
2-way
vs
-way
|
Have a dedicated mid-range driver |
 Sensitivity |
94 dB
vs
88 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
6.5 inches
vs
6 inches
|
Larger woofer |
|
Low Frequency Response |
28 Hz
vs
34 Hz
|
Generates deeper bass |
 Base Surface Area |
805cm2
vs
1061cm2
|
Takes less floor space |
 Price per pair* |
1000USD
vs
1249USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Monitor Audio Bronze 300 7G |
KLH Concord |
| Brand |
Monitor |
KLH |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
40-150 watts |
up to 225 watts |
| Sensitivity |
88 dB |
94 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
34-30k Hz |
28-23k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6" |
6.5" |
| Woofer Composition |
C-CAM |
Kevlar |
| Woofer Surround Material |
Rubber |
Butyl Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Hard-Dome |
n/a |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
N/A" |
No |
Physical Specs |
|
|
| Height |
1010.0mm (39.8") |
1026.0mm (40.4") |
| Width |
270.0mm (10.6") |
212.0mm (8.3") |
| Depth |
393.0mm (15.5") |
380.0mm (15") |
| Weight |
15.63kg (34.4lbs) |
20.45kg (45lbs) |
| Enclosure |
|
Bass Reflex |
| Finish |
MDF/Vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Black |
Black |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
No |
Other |
|
|
| Parts Warranty |
5 Years |
10 Years |
| Labor Warranty |
5 Years |
10 Years |