In this review, we will be comparing Bronze 100 and Q150, two Passive Bookshelf speakers from Monitor and KEF. Let's have a brief look at the main features of Monitor Audio Bronze 100 and KEF Q150 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how Monitor Audio Bronze 100 and KEF Q150 compares and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Bronze 100 and Q150 are 2-way speakers. Bronze 100 features a 1" Hard-Dome Tweeter and 1 x 6.5" C-CAM Woofer with a Crossover frequency at 2200Hz. On the other hand, Q150 features a 1" vented aluminum Dome Tweeter and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 2500Hz.
Frequency Response
Bronze 100 has a frequency range of 37-30k Hz whereas Q150 has a frequency range of 51-28k Hz. With a minimum frequency of 37Hz, the Bronze 100 can go significantly deeper on the low side and provide stronger bass compared to the Q150's min frequency of 51Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers under Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
Impedance and Sensitivity
Bronze 100 and Q150 has the same Impedance of 8 ohms but where they differ is the sensitivity levels. Bronze 100 sensitivity is rated at 87 dB and Q150's is at 86 dB. This 1 dB difference makes Monitor Audio Bronze 100 a more sensitive speaker compared to KEF Q150, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Bronze 100 has a power range of 30-100 watts RMS whereas Q150 has a power range of 10-100 watts.
Input Type and Bi-Amping / Bi-Wiring
Bronze 100 features Post posts which makes bi-amping or bi-wiring possible. Q150 has a Post which doesn't feature bi-amping/bi-wiring.
KEF Q150's Post terminals
Cabinet Type and Port Position
Both Bronze 100 and Q150 have rear firing ports. Rear ported speakers generlly need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing too close to the walls may cause the bass to sound boomy.
KEF Q150 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, We are going to compare Monitor Audio Bronze 100's and KEF Q150's external dimensions. Monitor Audio Bronze 100 has external dimensions of 376.0 x 231.0 x 325.0mm ( 14.8 x 9.0 x 12.7inch) whereas KEF Q150 has external dimensions of 303.0 x 180.0 x 278.0mm ( 11.9 x 7.0 x 10.9inch) .
Monitor Audio Bronze 100 is clearly the larger of the two speakers. Its body is 51mm wider, 73mm taller and 47mm deeper than KEF Q150.
Below you can see the front view size comparison of Monitor Audio Bronze 100 and KEF Q150 in scale.
Comparison image of Monitor Audio Bronze 100 and KEF Q150 Size and External Dimensions
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Monitor Audio Bronze 100 and KEF Q150 on a Media Console