In this review, we will be comparing SourcePoint 10 and Mission 770, two Passive Bookshelf speakers from MoFi and Mission. Let's have a brief look at the main features
of MoFi SourcePoint 10 and Mission 770 first before getting into our more
detailed comparison.
What size room are the MoFi SourcePoint 10 and Mission 770 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the MoFi SourcePoint 10 and Mission 770 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both SourcePoint 10 and Mission 770 are 2-way speakers.
Driver |
MoFi SourcePoint 10 |
Mission 770 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1.25-inch
|
1.25-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 10-inch
|
1 x 8-inch
|
SourcePoint 10 features a 1.25" wide roll soft dome Tweeter and 1 x 10" Paper-pulp Woofer with a Crossover frequency at 1600 Hz. On the other hand, the Mission 770 features a 1.25" Soft-Dome Tweeter and 1 x 8" mineral-loaded polyproylene Woofer with a Crossover frequency at 2900Hz.
Frequency Response
SourcePoint 10 has a frequency range of 42-30k Hz whereas Mission 770 has a frequency range of 42-20,000 Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
SourcePoint 10 and Mission 770 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. SourcePoint 10 sensitivity is rated at 91dB and the Mission 770's is at 88 dB. This 3 dB difference makes the MoFi SourcePoint 10 a more sensitive speaker compared to Mission 770, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
SourcePoint 10 features Post type posts and Mission 770 has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
SourcePoint 10 has a rear firing port whereas Mission 770 has a Front firing ports.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MoFi SourcePoint 10's and Mission 770's external dimensions. MoFi SourcePoint 10 has external dimensions of 572 x 368 x 406mm ( 22.5 x 14.5 x 16 inch) whereas Mission 770 has external dimensions of 590 x 279.4 x 301mm ( 23-1/4inch x 11-13/16inch x 12-11/16inch ) .
Mission 770 is 88.6mm narrower and 121mm less deeper than MoFi SourcePoint 10 but it is also 18mm taller.
Below you can see the front view size comparison of MoFi SourcePoint 10 and Mission 770 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MoFi SourcePoint 10 is approximately 1552.0cm2 / 240.6inch2 and base area of the Mission 770 is approximately 841.0cm2 / 130.4inch2. The SourcePoint 10 requires 85% more surface area than the Mission 770 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The MoFi SourcePoint 10 weighs 21.00kg / 46.2lbs and the Mission 770 weighs 27.20kg / 59.8lbs. This makes the Mission 770 30% heavier than the SourcePoint 10.
Here is a comparison of how SourcePoint 10 and Mission 770's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Mission 770?
Here are the items that come with the Mission 770:
Mission M770 Speaker: 2 Stand-mount loudspeakers 2 Grilles User Manual Mission M770 Stand: 2 Top-plates 2 Bases 8 Upright posts 8 Spike feet Hardware Instructions
Sensitivity |
91 dB
vs
88 dB
|
Play louder with same amount of amplification power |
Minimum Impedance |
6.2 ohms
vs
6 ohms
|
Very low impedance levels puts more pressure on amplifier |
Woofer Size |
10 inches
vs
8 inches
|
Larger woofer |
High Frequency Response |
30k Hz
vs
20k Hz
|
Generates higher frequency |
Height |
572mm
vs
590mm
|
Easier to fit in smaller spaces |
Price per pair* |
3699USD
vs
5000USD
|
costs less (*prices may change depending on the seller, location and time) |
Base Surface Area |
841cm2 (279x301mm)
vs
1552cm2 (368x422mm)
|
Takes less floor space |
General |
MoFi SourcePoint 10 |
Mission 770 |
Brand |
MoFi |
Mission |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
30-200 watts |
25-200 watts |
Sensitivity |
91dB |
88 dB |
Impedance |
8 ohms |
8 ohms |
Impedance |
6.2 ohms |
6 ohms |
Frequency Response |
42-30k Hz |
42-20,000 Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
10" |
8" |
Woofer Composition |
Paper-pulp |
mineral-loaded polyproylene |
Woofer Surround Material |
n/a |
low-density nitrile |
Tweeter Size |
1.25" |
1.25" |
Tweeter Type |
wide roll soft dome |
Soft-Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
1600 Hz |
2900Hz |
Firing Direction |
rear |
Front |
Physical Specs |
|
|
Height |
572.0mm (22.5") |
590.0mm (23.2") |
Width |
368.0mm (14.5") |
279.4mm (11") |
Depth |
422.0mm (16.6") |
301.0mm (11.9") |
Weight |
21.00kg (46.2lbs) |
27.20kg (59.8lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
real wood veneer |
MDF, particle board, wood |
Available Colors |
Satin Walnut, Satin Black Ash |
Walnut,Black Oak |
Mounting Bracket |
No |
No |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
No |
Other |
|
|
Parts Warranty |
|
3 years |
Labor Warranty |
|
3 years |