In this review, we will be comparing SourcePoint 10 and S400 MKII, two Passive Bookshelf speakers from MoFi and Buchardt.
Let's have a brief look at the main features
of MoFi SourcePoint 10 and Buchardt S400 MKII first before getting into our more
detailed comparison.
MoFi SourcePoint 10 Key Specs
- 2-way Design
- 1.25" wide roll soft dome Tweeter
- 10" Paper-pulp Woofer
- 42-30k Hz Frequency Response
- 91dB Sensitivity
- Impedance: 8ohms
- Power Range:30-200watts
- Weight:21.00kg
- Dimensions (H x W x D): 572.0" x 14.5" x 16"( 572 x 368 x 406mm )
Buchardt S400 MKII Key Specs
- 2-way Design
- 0.74" aluminum waveguide Tweeter
- 6" paper Woofer
- 33-40k HZ Frequency Response
- 88 dB Sensitivity
- Impedance: 4ohms
- Power Range:40-200watts
- Weight:7.50kg
- Dimensions (H x W x D): 365.0" x 7" x 11"( 365.0 x 180.0 x 280.0mm )
What size room are the MoFi SourcePoint 10 and Buchardt S400 MKII speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
MoFi SourcePoint 10 |
Buchardt S400 MKII |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the MoFi SourcePoint 10 and Buchardt S400 MKII compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both SourcePoint 10 and S400 MKII are 2-way speakers.
| Driver |
MoFi SourcePoint 10 |
Buchardt S400 MKII |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.25-inch
|
0.74-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 10-inch
|
1 x 6-inch
|
SourcePoint 10 features a 1.25" wide roll soft dome Tweeter and 1 x 10" Paper-pulp Woofer with a Crossover frequency at 1600 Hz. On the other hand, the S400 MKII features a 0.74" fine weave soft fabric textile aluminum waveguide Tweeter and 1 x 6" paper Woofer with a Crossover frequency at 1800Hz.
Frequency Response
SourcePoint 10 has a frequency range of 42-30k Hz whereas S400 MKII has a frequency range of 33-40k HZ. With a minimum frequency of 33Hz, the S400 MKII can go significantly deeper on the low side and provide stronger bass compared to the SourcePoint 10's min frequency of 42Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
SourcePoint 10 is a 8 ohms speaker compared to the S400 MKII which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the S400 MKII can provide this impedance level.
These two speakers also have different sensitivity levels. SourcePoint 10 sensitivity is rated at 91dB and the S400 MKII's is rated at 88 dB. This 3 dB difference makes the MoFi SourcePoint 10 a more sensitive speaker compared to Buchardt S400 MKII, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MoFi SourcePoint 10's and Buchardt S400 MKII's external dimensions. MoFi SourcePoint 10 has external dimensions of 572 x 368 x 406mm ( 22.5 x 14.5 x 16 inch) whereas Buchardt S400 MKII has external dimensions of 365.0 x 180.0 x 280.0mm ( 14.4 x 7 x 11inch) .
MoFi SourcePoint 10 is clearly the larger of the two speakers. Its body is 188mm wider, 207mm taller and 142mm deeper than Buchardt S400 MKII.
Below you can see the front view size comparison of MoFi SourcePoint 10 and Buchardt S400 MKII in scale.
Comparison image of MoFi SourcePoint 10 and Buchardt S400 MKII Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MoFi SourcePoint 10 is approximately 1552.0cm2 / 240.6inch2 and base area of the Buchardt S400 MKII is approximately 504.0cm2 / 78.1inch2. The SourcePoint 10 requires 208% more surface area than the S400 MKII which gives it a small disadvantage on placement in tight spaces.