In this review, we will be comparing Mission 700 and RP-600M, two Passive Bookshelf speakers from Mission and Klipsch. Let's have a brief look at the main features
of Mission 700 and Klipsch RP-600M first before getting into our more
detailed comparison.
What size room are the Mission 700 and Klipsch RP-600M speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Mission 700 and Klipsch RP-600M compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Mission 700 and RP-600M are 2-way speakers.
| Driver |
Mission 700 |
Klipsch RP-600M |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.25-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
Mission 700 features a 1.25" Soft-Dome Tweeter and 1 x 6.5" mineral loaded polypropylene cone Woofer with a Crossover frequency at 3000Hz. On the other hand, the RP-600M features a 1" Tractrix Horn Tweeter and 1 x 6.5" Cerametallic Woofer with a Crossover frequency at 1500Hz.
Frequency Response
Mission 700 has a frequency range of 45-20,000 Hz whereas RP-600M has a frequency range of 45-25k Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Mission 700 and RP-600M have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Mission 700 sensitivity is rated at 86 dB and the RP-600M's is at 96 dB. This 10 dB difference makes the Klipsch RP-600M a more sensitive speaker compared to Mission 700, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Mission 700 can handle a max power of 150 watts RMS from the amp the whereas RP-600M has a max power handling value of 100 watts RMS, 50 watts less than the Mission 700.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RP-600M features Dual binding posts/bi-wire/bi-amp posts which make bi-amping or bi-wiring possible. Mission 700 has a Post which doesn't feature bi-amping/bi-wiring.
Mission 700's Post terminals
Klipsch RP-600M's Dual binding posts/bi-wire/bi-amp terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Mission 700 has a Front firing port whereas RP-600M has a rear firing ports.
Mission 700 Front Port
Klipsch RP-600M Tractrix horn-shaped Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Mission 700's and Klipsch RP-600M's external dimensions. Mission 700 has external dimensions of 1590 x 260 x 270mm ( 20 x 10.2 x 10.6 inch ) whereas Klipsch RP-600M has external dimensions of 399.0 x 202.0 x 301.0mm ( 15.7 x 7.9 x 11.8inch) .
Klipsch RP-600M is 58mm narrower and 111mm shorter than Mission 700 but it is also 31mm deeper.
Below you can see the front view size comparison of Mission 700 and Klipsch RP-600M in scale.
Comparison image of Mission 700 and Klipsch RP-600M Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Mission 700 is approximately 702.0cm2 / 108.8inch2 and base area of the Klipsch RP-600M is approximately 608.0cm2 / 94.2inch2. The Mission 700 requires 15% more surface area than the RP-600M which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Mission 700 weighs 12.80kg / 28.2lbs and the Klipsch RP-600M weighs 7.30kg / 16.1lbs. This makes the Mission 700 75% heavier than the RP-600M.
Here is a comparison of how Mission 700 and RP-600M's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Mission 700?
Here are the items that are included inside the box of Mission 700:
Mission M700 Speaker: 2 Stand-mount loudspeakers 2 Grilles User Manual Mission M700 Stand: 2 Top-plates 2 Bases 8 Upright posts 8 Spike feet Hardware Instructions
What's in the Box of Klipsch RP-600M?
Here are the items that come with the RP-600M:
2 Bookshelf loudspeakers2 Grilles (installed)8 Self-adhesive rubber feet4 Terminal jumpers (installed)User ManualImportant Safety InstructionsWarranty Information
 Max Input Power |
150 watts
vs
100 watts
|
Handle more power from your amplifier |
 Sensitivity |
96 dB
vs
86 dB
|
Play louder with same amount of amplification power |
 High Frequency Response |
25k Hz
vs
20k Hz
|
Generates higher frequency |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Height |
399mm
vs
510mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
608cm2 (202x301mm)
vs
702cm2 (260x270mm)
|
Takes less floor space |
 Price per pair* |
369USD
vs
1500USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Mission 700 |
Klipsch Reference Premiere RP-600M |
| Brand |
Mission |
Klipsch |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
25-150 watts |
up to 100 watts |
| Sensitivity |
86 dB |
96 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
5.2 ohms |
n/a |
| Frequency Response |
45-20,000 Hz |
45-25k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
mineral loaded polypropylene cone |
Cerametallic |
| Woofer Surround Material |
low-density nitrile |
Rubber |
| Tweeter Size |
1.25" |
1" |
| Tweeter Type |
Soft-Dome |
Tractrix Horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
3000Hz |
1500Hz |
| Firing Direction |
Front |
rear |
Physical Specs |
|
|
| Height |
510.0mm (20.1") |
399.0mm (15.7") |
| Width |
260.0mm (10.2") |
202.0mm (8") |
| Depth |
270.0mm (10.6") |
301.0mm (11.9") |
| Weight |
12.80kg (28.2lbs) |
7.30kg (16.1lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF, particle board, wood |
MDF/Wood-grain vinyl |
| Available Colors |
Walnut Pearl, Black Oak |
Ebony, Walnut, Piano Black |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
n/a |
22-26" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
3 years |
5 Years |
| Labor Warranty |
3 years |
5 Years |