In this review, we will be comparing Motion F20 and Ultra Tower, two Passive Floor-standing speakers from MartinLogan and SVS. Let's have a brief look at the main features
of MartinLogan Motion F20 and SVS Ultra Tower first before getting into our more
detailed comparison.
What size room are the MartinLogan Motion F20 and SVS Ultra Tower speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the MartinLogan Motion F20 and SVS Ultra Tower compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Motion F20 and Ultra Tower are 3-way speakers.
| Driver |
MartinLogan Motion F20 |
SVS Ultra Tower |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1.0 x 1.4-inch
|
1.0-inch
|
|
Midrange
|
1 x 5.5-inch |
2 x 6.5-inch |
|
Woofer
|
2 x 5.5-inch
|
2 x 8.0-inch
|
Motion F20 features a 1.0 x 1.4" Folded Motion Ribbon Tweeter , a 5.5" Midrange and 2 x 5.5" Aluminum Woofer with a Crossover frequency at 230Hz and 2600Hz. On the other hand, the Ultra Tower features a 1.0" aluminum Dome Tweeter , a 6.5" Midrange and 2 x 8.0" Polypropylene Woofer with a Crossover frequency at 160HZ and 2000Hz.
Frequency Response
Motion F20 has a frequency range of 35-25k Hz whereas Ultra Tower has a frequency range of 28-32k Hz. With a minimum frequency of 28Hz, the Ultra Tower can go significantly deeper on the low side and provide stronger bass compared to the Motion F20's min frequency of 35Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Motion F20 is a 4 ohms speaker compared to the Ultra Tower which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Motion F20 can provide this impedance level.
These two speakers also have different sensitivity levels. Motion F20 sensitivity is rated at 92 dB and the Ultra Tower's is rated at 88 dB. This 4 dB difference makes the MartinLogan Motion F20 a more sensitive speaker compared to SVS Ultra Tower, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Motion F20 and Ultra Tower has the same power range of 20-300 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Motion F20 and Ultra Tower features dual binding post speaker terminals for bi-amping or bi-wiring.
MartinLogan Motion F20's Custom 5-way bi-wire tool-less binding posts terminals allows Bi-amping or bi-wiring
SVS Ultra Tower's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MartinLogan Motion F20's and SVS Ultra Tower's external dimensions. MartinLogan Motion F20 has external dimensions of 1127 x 298 x 362mm ( 44-3/4inch x 11-3/4inch x 14-1/4inch ) whereas SVS Ultra Tower has external dimensions of 1159.0 x 355.0 x 445.0mm ( 45-5/8 x 13-15/16 x 17-1/2inch) .
SVS Ultra Tower is clearly the larger of the two speakers. Its body is 57mm wider, 32mm taller and 83mm deeper than MartinLogan Motion F20.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MartinLogan Motion F20 is approximately 1078.8cm2 / 167.2inch2 and base area of the SVS Ultra Tower is approximately 1579.8cm2 / 244.9inch2. The Motion F20 requires 32% less surface area than the Ultra Tower which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The MartinLogan Motion F20 weighs 27.20kg / 59.8lbs and the SVS Ultra Tower weighs 34.27kg / 75.4lbs. This makes the Ultra Tower 26% heavier than the Motion F20.
Here is a comparison of how Motion F20 and Ultra Tower's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of SVS Ultra Tower?
Here are the items that come with the Ultra Tower:
Floorstanding loudspeakerCloth grille2 Metal grillesFoam port plug4 Elastomer isolation feet (pre-installed)4 Spike feet4 Nuts4 Protective discs2 Terminal jumpers (pre-installed)Owners ManualSVS brochureOnline Product Registration Card
 Sensitivity |
92 dB
vs
88 dB
|
Play louder with same amount of amplification power |
 Height |
1127mm
vs
1159mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1078cm2 (298x362mm)
vs
1579cm2 (355x445mm)
|
Takes less floor space |
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
 Woofer Size |
8.0 inches
vs
5.5 inches
|
Larger woofer |
| Low Frequency Response |
28 Hz
vs
35 Hz
|
Generates deeper bass |
 High Frequency Response |
32k Hz
vs
25k Hz
|
Generates higher frequency |
 Price per pair* |
2600USD
vs
3498USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
MartinLogan Motion F20 |
SVS Ultra Tower |
| Brand |
MartinLogan |
SVS |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
20-300 watts |
20-300 watts |
| Sensitivity |
92 dB |
88 dB |
| Impedance |
4 ohms |
8 ohms |
| Frequency Response |
35-25k Hz |
28-32k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
5.5" |
8.0" |
| Woofer Composition |
Aluminum |
Polypropylene |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1.0 x 1.4" |
1.0" |
| Tweeter Type |
Folded Motion Ribbon |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
5.5" |
6.5" |
| Crossover Frequency |
230Hz and 2600Hz |
160HZ and 2000Hz |
| Firing Direction |
bottom |
n/a |
| Suggested Break-in Period |
Allow 72 hours of break-in |
n/a |
Physical Specs |
|
|
| Height |
1127.0mm (44.4") |
1159.0mm (45.6") |
| Width |
298.0mm (11.7") |
355.0mm (14") |
| Depth |
362.0mm (14.3") |
445.0mm (17.5") |
| Weight |
27.20kg (59.8lbs) |
34.27kg (75.4lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF/Oak veneer |
| Available Colors |
Gloss Black, Walnut, and Satin White |
Black Oak,Piano Gloss Black,Piano Gloss White |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |