In this review, we will be comparing Motion 60XTi and Triton Five, two Passive Floor-standing speakers from MartinLogan and GoldenEar. Let's have a brief look at the main features
of MartinLogan 60XTi and GoldenEar Triton Five first before getting into our more
detailed comparison.
What size room are the MartinLogan 60XTi and GoldenEar Triton Five speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the MartinLogan 60XTi and GoldenEar Triton Five compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Motion 60XTi is a 3-way design whereas the Triton Five is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
MartinLogan 60XTi |
GoldenEar Triton Five |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
1.25 x 2.4-inch
|
-inch
|
|
Midrange
|
1 x 6.5-inch |
- |
|
Woofer
|
2 x 8-inch
|
2 x 6-inch
|
Motion 60XTi features a 1.25 x 2.4" Folded Motion XT Tweeter , a 6.5" Midrange and 2 x 8" Aluminum Woofer with a Crossover frequency at 400Hz and 2200Hz. On the other hand, the Triton Five features a " Folded Ribbon Tweeter and 2 x 6" Polypropylene Woofer .
Frequency Response
Motion 60XTi has a frequency range of 35-25k Hz whereas Triton Five has a frequency range of 26-35k Hz. With a minimum frequency of 26Hz, the Triton Five can go significantly deeper on the low side and provide stronger bass compared to the Motion 60XTi's min frequency of 35Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Motion 60XTi is a 4 ohms speaker compared to the Triton Five which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Motion 60XTi can provide this impedance level.
These two speakers also have different sensitivity levels. Motion 60XTi sensitivity is rated at 94 dB and the Triton Five's is rated at 90 dB. This 4 dB difference makes the MartinLogan 60XTi a more sensitive speaker compared to GoldenEar Triton Five, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Motion 60XTi features Custom 5-way bi-wire tool-less binding posts posts which make bi-amping or bi-wiring possible. Triton Five has a 5-way Post which doesn't feature bi-amping/bi-wiring.
MartinLogan 60XTi's Custom 5-way bi-wire tool-less binding posts terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both Motion 60XTi and Triton Five have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MartinLogan 60XTi's and GoldenEar Triton Five's external dimensions. MartinLogan 60XTi has external dimensions of 1174.0 x 231.0 x 396.0mm ( 46-3/16 x 9-1/16 x 15-9/16inch) whereas GoldenEar Triton Five has external dimensions of 1131.0 x 281.0 x 421.0mm ( 44-1/2 x 11-1/16 x 16-9/16inch) .
MartinLogan 60XTi is 50mm narrower and 25mm less deeper than GoldenEar Triton Five but it is also 43mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MartinLogan 60XTi is approximately 914.8cm2 / 141.8inch2 and base area of the GoldenEar Triton Five is approximately 1183.0cm2 / 183.4inch2. The Motion 60XTi requires 23% less surface area than the Triton Five which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The MartinLogan 60XTi weighs 30.00kg / 66lbs and the GoldenEar Triton Five weighs 18.18kg / 40lbs. This makes the Motion 60XTi 65% heavier than the Triton Five.
Here is a comparison of how Motion 60XTi and Triton Five's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of MartinLogan 60XTi?
Here are the items that are included inside the box of Motion 60XTi:
Floorstanding loudspeaker2 Grilles4 Rubber feet (pre-installed)4 Spike feet (w/ nuts attached)2 Feet stabizers4 BoltsHex-keyUsers ManualWarranty/Registration Information
What's in the Box of GoldenEar Triton Five?
Here are the items that come with the Triton Five:
Floorstanding loudspeaker4 Rubber feet (pre-installed)4 Spikes4 Locking nutsOwners Manual
 Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
 Sensitivity |
94 dB
vs
90 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
8 inches
vs
6 inches
|
Larger woofer |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Base Surface Area |
914cm2 (231x396mm)
vs
1183cm2 (281x421mm)
|
Takes less floor space |
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
| Low Frequency Response |
26 Hz
vs
35 Hz
|
Generates deeper bass |
 High Frequency Response |
35k Hz
vs
25k Hz
|
Generates higher frequency |
 Passive Radiator |
four 8-inch infrasonic planar sub-bass
vs
None
|
Increases the bass performance |
 Height |
1131mm
vs
1174mm
|
Easier to fit in smaller spaces |
 Price per pair* |
2398USD
vs
3750USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
MartinLogan Motion 60XTi |
GoldenEar Triton Five |
| Brand |
MartinLogan |
GoldenEar |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
20-400 watts |
15-400 watts |
| Sensitivity |
94 dB |
90 dB |
| Impedance |
4 ohms |
8 ohms |
| Frequency Response |
35-25k Hz |
26-35k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
8" |
6" |
| Woofer Composition |
Aluminum |
Polypropylene |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1.25 x 2.4" |
- |
| Tweeter Type |
Folded Motion XT |
Folded Ribbon |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
6.5" |
No |
| Crossover Frequency |
400Hz and 2200Hz |
n/a |
| Firing Direction |
rear |
rear |
| Suggested Break-in Period |
Allow 72 hours of break-in at 90 dB |
n/a |
Physical Specs |
|
|
| Height |
1174.0mm (46.2") |
1131.0mm (44.5") |
| Width |
231.0mm (9.1") |
281.0mm (11.1") |
| Depth |
396.0mm (15.6") |
421.0mm (16.6") |
| Weight |
30.00kg (66lbs) |
18.18kg (40lbs) |
| Enclosure |
Bass Reflex |
Passive Radiator |
| Finish |
MDF/Lacquer |
MDF/Lacquer |
| Available Colors |
Gloss Black, Matt White, Red Walnut |
Gloss Black |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |